Engine Mechanical:
Complete engine overhaul, internal components, rotary engine specifics (apex seals, rotor housing, etc.)
Fuel System:
Carburetor service and tuning, fuel pump, fuel lines, fuel tank
Ignition System:
Ignition timing, distributor, spark plugs, ignition coils
Cooling System:
Radiator, water pump, thermostat, coolant hoses, cooling fan
Lubrication System:
Oil pump, oil filter, oil pan, lubrication passages
Emission Control:
Air pump, vacuum control valves, PCV system (as applicable to 1971 regulations)
Transmission Manual:
Clutch service, gearbox overhaul, gear ratios, shift linkage
Transmission Automatic:
Automatic transmission service and repair (if applicable model)
Drivetrain:
Driveshaft, universal joints, differential, axle shafts
Suspension Front:
Control arms, ball joints, shock absorbers, steering knuckles
Suspension Rear:
Leaf springs, shock absorbers, rear axle location
Steering:
Steering gearbox, steering linkage, tie rods, steering wheel removal
Brakes Front:
Disc brake caliper service, pads, rotors, brake lines
Brakes Rear:
Drum brake service, wheel cylinders, brake shoes, brake drums
Parking Brake:
Parking brake mechanism and linkage
Wheels Tires:
Wheel specifications, tire pressure recommendations
Electrical System Basic:
Battery, starter motor, alternator, wiring harness routing
Lighting:
Headlights, taillights, turn signals, interior lighting
Instrumentation:
Speedometer, tachometer, gauges, warning lights
Body Exterior:
Body panel repair, trim, bumpers, doors, hood, trunk lid
Body Interior:
Seats, door panels, dashboard, carpet, headliner
Glass Mirrors:
Windshield, side glass, rear glass, mirror replacement
Heating Ventilation Ac:
Heater core, ventilation ducts, basic AC system service (if equipped)
Wipers Washers:
Wiper motor, linkage, blades, washer pump, fluid reservoir
Seat Belts:
Seat belt operation and maintenance
Maintenance:
Oil changes, filter replacements, fluid checks, lubrication points, tune-ups
Diagnostics:
Troubleshooting guides for common issues, symptom-based diagnostics
Repair:
Step-by-step instructions for component removal, overhaul, and installation
Overhaul:
Complete rebuild procedures for major components like the engine and transmission
Adjustment:
Carburetor adjustments, ignition timing settings, brake adjustments
Depth:
Factory-level detail, covering everything from basic maintenance to full engine and transmission rebuilds.
Illustrations:
Detailed diagrams, exploded views, and illustrations for clarity.
Schematics:
Comprehensive wiring schematics for all electrical systems.
Oil Change Interval:
Refer to manual; typically 3,000 miles or 3 months for engines of this era, especially rotaries.
Spark Plug Replacement:
Refer to manual; likely at major service intervals or based on inspection.
Engine Oil:
Refer to manual for specific viscosity (e.g., 10W-30, 20W-50) and API service classification suitable for rotary engines of the era.
Coolant:
Ethylene Glycol-based antifreeze/coolant mixture. Specific mix ratio and type to be confirmed in manual.
Transmission Fluid Manual:
Gear oil for the manual transmission, specific GL rating required (e.g., GL-4 or GL-5, confirm in manual).
Transmission Fluid Automatic:
Dexron II or equivalent ATF (if equipped with automatic).
Brake Fluid:
DOT 3 or DOT 4 brake fluid (confirm in manual).
Differential Fluid:
Gear oil, specific GL rating (e.g., GL-5, confirm in manual).
Rotary Engine Maintenance:
Apex seal wear, carbon buildup, specific lubrication requirements for rotary engines (oil injection system).
Carburetor Tuning:
Carburetors can be sensitive to tuning and require regular adjustment, especially with age.
Cooling System Reliability:
Rotary engines can run hotter; ensuring the cooling system is in top condition is paramount.
