Engine:
Comprehensive overhaul and rebuilding procedures, engine performance tuning, firing orders, timing belt service, serpentine belt routings.
Brakes:
Detailed servicing procedures, troubleshooting, and specifications for all brake system components.
Drivetrain:
Transmission removal and installation, in-car servicing, U-joint and CV-joint service procedures.
Suspension Steering:
Front end alignment procedures and specifications, general suspension service.
Electrical Electronics:
Complete wiring diagrams, troubleshooting for electrical systems, computer diagnostic trouble tree charts, computer diagnostic codes.
Body Chassis:
Sunroof service, general repair procedures.
HVAC:
Air conditioning service and capacities.
Fuel Delivery:
Detailed procedures for fuel pumps, carburetors, fuel injectors, and associated lines.
Cooling System:
Radiator, water pump, thermostat, fan, and coolant flow diagnostics and repair.
Exhaust System:
Component identification, removal, and installation procedures.
Ignition System:
Distributor, coil, spark plugs, timing adjustments, and troubleshooting.
Body Panels:
Procedures for removal and installation of common body panels and trim.
Lighting System:
Headlights, taillights, turn signals, and interior lighting service.
Maintenance:
Factory maintenance schedules and charts.
Troubleshooting Diagnostics:
Extensive troubleshooting and diagnostics for all vehicle systems, including specific trouble codes and diagnostic charts.
Repair Rebuild:
Step-by-step instructions for repair and rebuilding of major components, including engine and transmission.
Engine Mount Replacement:
Included within engine overhaul and repair sections.
Clutch Service:
Detailed procedures for clutch replacement and adjustment.
Differential Service:
Service and repair of the rear differential unit, integrated into the transaxle.
Seat Removal:
Included within interior repair sections.
Dashboard Disassembly:
Detailed instructions for accessing components behind the dashboard.
Scope:
Covers every single detail on the car, including all models and engines within the specified year range, with a high level of technical detail suitable for professional technicians.
Diagnostic Tools:
Covers the use of diagnostic tools relevant to the era, including troubleshooting with trouble codes and diagnostic charts.
Engine Data:
Specifications for various engine displacements, bore, stroke, compression ratios, and power/torque figures for different Alfetta models.
Chassis Specifications:
Details on suspension geometry, alignment angles (camber, caster, toe), and steering specifications.
Wheel Tire Specifications:
Information on original wheel sizes, bolt patterns (e.g., 4x108 PCD), and recommended tire sizes.
Engine Identification:
Guidance on identifying different engine variants based on displacement, cylinder count, and specific features (e.g., carbureted vs. injected).
Diagram Types:
Exploded view diagrams for parts identification, assembly, and disassembly. Vacuum routing diagrams for engine management. Wiring diagrams illustrating electrical circuits.
Oil Change Interval:
Typically every 5,000-10,000 km (3,000-6,000 miles) or 6-12 months, depending on driving conditions and oil used.
Timing Belt Replacement:
Crucial procedure covered in detail, with recommended intervals often around 50,000-70,000 km (30,000-45,000 miles) for the twin-cam engines.
Engine Oil Specification:
Manual will specify viscosity grades such as 10W-40 or 20W-50, and API service classifications suitable for the era's engines.
Coolant Specification:
Information on recommended coolant mixtures and types, typically a 50/50 ethylene glycol and distilled water mix.
Common Wear Items:
Areas often requiring attention include rubber bushings, wear on camshafts, ignition system components, and fuel delivery systems.
Rust Prevention:
While not explicitly stated as a 'known issue' in the manual itself, rust is a common concern for vehicles of this era, and the manual provides the mechanical basis for maintaining structural integrity.
Grease Points:
Details on lubrication points for suspension components, steering linkages, and other moving parts.