🏷️ Basic Information

Make:

Cagiva

Model:

Freccia 125 C9

Model Code:

C9

Model Variant:

Freccia 125

Generation Name:

First Generation

Generation Years:

1987-1990

Chassis Code:

C9

👋 Introduction

Market Segment:

Lightweight sport motorcycle (125cc supersport class)

Target Audience:

Young riders, enthusiasts seeking performance and style in the 125cc category.

Key Competitors:

Yamaha TZR 125, Suzuki RG 125 Gamma, Aprilia RS 125 (later models), Honda NSR 125.

Design Philosophy:

Aspirational supersport styling mirroring larger Cagiva models, advanced chassis and suspension for its class.

Aerodynamics:

Full fairing designed for aerodynamic efficiency and distinctive Italian styling.

Handling:

Sport-oriented chassis geometry and suspension setup for agile handling.

📋 Manual Details

Years Covered:

1988, 1989, 1990

Specific Markets Covered:

Global (primarily European focus, common for Cagiva)

Estimated Page Count:

200-300

Manual Type:

Complete Workshop Service Repair Manual

Language:

English (standard for comprehensive workshop manuals)

Format:

Digital (likely PDF)

📖 Manual Coverage

Engine Overhaul:

Complete engine disassembly, inspection, repair, and reassembly procedures.

Fuel System:

Carburetor adjustment and overhaul (Dell'Orto PHBH/PHSB), fuel pump, fuel lines, fuel tank.

Ignition System:

CDI ignition system, spark plug specifications, timing adjustment, coil testing.

Cooling System:

Liquid cooling system, radiator, water pump, thermostat, coolant specifications and bleeding procedures.

Exhaust System:

Exhaust pipe and silencer maintenance and inspection.

Transmission Clutch:

Gearbox disassembly, inspection, and repair; clutch assembly, adjustment, and friction plate replacement.

Suspension Front:

Telescopic front fork (e.g., Marzocchi or Paioli) disassembly, oil change, seal replacement, and adjustment.

Suspension Rear:

Monoshock rear suspension system, shock absorber adjustment and overhaul, linkage maintenance.

Brakes Front:

Disc brake system, caliper overhaul, pad replacement, hydraulic fluid specifications and bleeding.

Brakes Rear:

Disc brake system, caliper overhaul, pad replacement, hydraulic fluid specifications and bleeding.

Wheels Tires:

Wheel bearing inspection and replacement, tire pressure recommendations, wheel balancing.

Electrical System:

Wiring diagrams, battery maintenance, lighting system, starter motor, alternator/stator testing.

Bodywork Chassis:

Frame inspection, fairing removal and installation, seat, fuel tank, and minor body panel repairs.

Routine Maintenance:

Oil changes, filter replacements, chain adjustment, spark plug checks, lubrication points.

Troubleshooting Guides:

Diagnostic procedures for common starting, running, and electrical issues.

Engine Rebuild:

Piston, cylinder, crankshaft, and connecting rod replacement and measurement specifications.

Carburetor Tuning:

Detailed steps for jetting, float height adjustment, and idle speed control.

Brake Bleeding:

Step-by-step instructions for purging air from the hydraulic brake system.

Fork Seal Replacement:

Comprehensive guide to disassembling and reassembling front forks for seal replacement.

Electrical Component Testing:

Methods for testing CDI units, ignition coils, regulators, and other electrical parts using a multimeter.

Wheel Bearing Replacement:

Guidance on removing and installing wheel bearings.

Technical Depth:

Comprehensive (from basic maintenance to complete engine and chassis rebuilds)

Diagnostic Capability:

Detailed troubleshooting sections with symptom-to-cause correlation.

Torque Specifications:

Includes critical torque values for engine, chassis, and brake components.

Tolerances And Clearances:

Specific measurements for critical engine parts like piston-to-cylinder clearance, bearing clearances.

📊 Manual Specifications

File Format:

PDF

Searchability:

Text-searchable (if scanned from original with OCR)

Print Quality:

High-resolution scans for clear diagrams and text

Binding Type:

N/A (Digital format)

Paper Type:

N/A (Digital format)

Diagrams And Illustrations:

Detailed exploded views, wiring diagrams, and step-by-step repair illustrations.

⚙️ Engine Specifications

Engine Type:

2-stroke, liquid-cooled

Engine Displacement:

124.5 cc

Bore X Stroke:

56 mm x 50.6 mm

Compression Ratio:

Approx. 7.4:1 (variable by variant/region, often lower for emission compliance)

Cylinder Configuration:

Single-cylinder, reed valve intake

Horsepower Peak:

Approx. 30-32 HP @ 11,000 RPM (varies by market restrictions)

Torque Peak:

Approx. 19 Nm @ 10,500 RPM

Carburetor Model:

Dell'Orto PHBH 30 or PHSB 30 (common)

Fuel Delivery:

Gravity feed from fuel tank to carburetor.

Fuel Type:

Unleaded gasoline (RON 95 recommended), requires 2-stroke oil premixed or via oil injection system.

Lubrication System:

Pre-mix or separate oil injection system (depending on specific C9 variant).

🔧 Transmission

Transmission Type:

6-speed constant mesh

Clutch Type:

Wet multi-plate

Gear Ratios:

Specific gear ratios for each speed are detailed within the manual.

Final Drive:

Chain drive

Transmission Fluid Type:

Gear oil (e.g., SAE 80W-90 or similar, as specified in manual)

📐 Dimensions

Length:

Approx. 2000 mm

Width:

Approx. 740 mm

Height:

Approx. 1130 mm

Wheelbase:

Approx. 1360 mm

Dry Weight:

Approx. 130 kg

Fuel Tank Capacity:

Approx. 16 Liters

Oil Tank Capacity:

Approx. 1.4 Liters (for oil injection models)

Coolant Capacity:

Approx. 1.2 Liters

🛡️ Safety Features

Safety Ratings:

N/A (Motorcycles are not typically assigned the same crash safety ratings as cars)

Braking System:

Dual hydraulic disc brakes (front and rear) for enhanced stopping power.

Tires:

Sport-biased tire fitment for grip in cornering.

Lighting:

Full lighting system including headlights, taillights, brake lights, and turn signals.

Chassis Construction:

Steel perimeter frame designed for rigidity and handling stability.

💡 Technology Features

Infotainment Features:

Basic analogue instrumentation (speedometer, tachometer, temperature gauge, indicator lights).

Driver Assistance Features:

None (as typical for motorcycles of this era)

Connectivity Features:

None (as typical for motorcycles of this era)

🔧 Maintenance

Engine Oil Change:

Every 3,000-5,000 km or annually, check manual for specific recommendation.

Spark Plug Replacement:

Inspect every 5,000 km, replace as needed (refer to manual for specific plug type and gap).

Air Filter Cleaning:

Clean every 5,000 km, replace every 10,000-15,000 km.

Chain Lubrication:

Lubricate and adjust chain every 1,000 km or as needed.

Fork Oil Change:

Recommended every 10,000-15,000 km or if fork performance degrades.

Coolant Type:

Ethylene glycol based antifreeze mixture (50/50 with distilled water recommended).

Brake Fluid Type:

DOT 3 or DOT 4 hydraulic brake fluid (refer to manual for exact specification).

2 Stroke Oil Type:

High-quality 2-stroke synthetic or semi-synthetic oil (API TC, JASO FD or FD compliant).

Known Issues List:

Typical issues include carburetor gumming due to infrequent use, wear on reed valves, aging electrical connectors, and fork seal leaks. Overheating can occur if cooling system is not maintained. Two-stroke engines require diligent maintenance.

📚 Vehicle History

Brand Origin:

Cagiva is an Italian motorcycle manufacturer, known for its sporty and performance-oriented machines.

Brand Focus:

Historically focused on 2-stroke performance and racing heritage, particularly in smaller displacement classes.

Predecessor:

Models like the Cagiva Mito 125 (which evolved from this platform) and earlier Cagiva 125 models.

Successor:

The Freccia platform paved the way for the highly successful Cagiva Mito series.

Design Influences:

Features a design language heavily influenced by larger sportbikes of the era, aiming for a 'big bike' feel in a 125cc package.

Manufacturing Location:

Italy

Production Period:

The C9 model designation specifically covers the 1988-1990 production years.

🏆 Awards & Recognition

Industry Recognition:

While specific awards for the C9 model are not widely publicized, Cagiva's racing heritage and sporty models like the Freccia and subsequent Mito were highly regarded in the 125cc racing scene and by enthusiasts for their performance and styling.