🏷️ Basic Information

Make:

Cadillac

Model:

Brougham

Year:

1989

Generation Identifier:

Final Generation

Platform Code:

V-body (based on former rear-wheel drive GM C and H body platforms)

👋 Introduction

Target Audience:

Cadillac Brougham owners, independent repair shops, automotive enthusiasts seeking in-depth knowledge.

Value Proposition:

Provides the exact same, highly detailed, vehicle-specific information used by dealership technicians, enabling DIY repairs and comprehensive maintenance.

Differentiation:

Not generic; vehicle-specific factory documentation, unlike aftermarket manuals that may lack detail or accuracy for specific models.

Content Format:

Step-by-step instructions, diagrams, illustrations, wiring schematics, and specifications.

Usability:

Single PDF for easy navigation, printable pages for workshop use, searchable text for quick information retrieval.

📋 Manual Details

Primary Coverage:

All models and all repairs A-Z for the 1989 Cadillac Brougham

Secondary Coverage:

Maintenance, engine, control systems, mechanical, fuel service, emission control, cooling systems, lubrication, ignition, starting, charging, automatic transmissions, clutches, manual transmissions, transfer cases, drive shafts, differentials, axles, suspension, tires, wheels, brake control, brakes, parking brakes, steering columns, power steering, air conditioning, supplemental restraint systems, seat belts, engine immobilizers, cruise control, wipers, washers, door locks, meters, audio/visual systems, horns, windshields, glass, mirrors, instrument panels, seats, engine hoods, doors, exterior and interior components, electrical systems, multiplex/CAN communication

Estimated Page Count:

Likely exceeds 1000 pages considering the breadth of coverage; specific count not provided but described as comprehensive.

Type:

Factory Service and Repair Manual

Language:

English

Format:

Digital (PDF)

📖 Manual Coverage

Powertrain:

Engine overhaul, fuel system diagnosis and repair, ignition system, starting and charging systems, cooling and lubrication systems, exhaust system, automatic transmission service (e.g., THM 700-R4), manual transmission service (if applicable), driveline components (driveshaft, U-joints, differential, axles).

Chassis:

Suspension (front and rear), steering (column and power steering), brakes (hydraulic system, parking brake, ABS if equipped), wheel bearings, tire service.

Body And Interior:

Body panel repair, door mechanisms, locks, glass replacement, seat adjustment, interior trim, instrument panel, HVAC system, wipers, washers, exterior lighting.

Electrical:

Complete wiring schematics, lighting circuits, instrument cluster, power accessories (windows, seats, locks), audio systems, cruise control, horn, supplemental restraint system (SRS) diagnosis and repair, engine control module (ECM) diagnostics, multiplex communication systems (if applicable).

Diagnostic Procedures:

Troubleshooting guides, diagnostic flowcharts, code reading and interpretation (if OBD-I equipped), component testing.

Repair Procedures:

Step-by-step instructions for component removal, installation, and adjustment for all covered systems.

Maintenance Procedures:

Recommended service intervals, fluid changes, filter replacements, lubrication points, belt adjustments, tune-up procedures.

Specifications And Tolerances:

Torque specifications, engine clearances, fluid capacities and types, alignment specifications, electrical resistance values.

Depth:

Factory-level detail, intended for professional technicians, covering complete rebuilds, advanced diagnostics, and component-level repairs.

📊 Manual Specifications

Format:

PDF (Portable Document Format)

Compatibility:

Windows (Vista 32/64, XP, ME, 98, NT, 2000) and Mac OS

Requirements:

Adobe PDF Reader, Winzip (free online)

Printable:

Yes, all pages are printable.

Image Scalability:

Images can be blown up and printed in enlarged copies.

Binding:

Digital, no physical binding. Allows for selective printing.

Paper Type:

N/A (digital format, user prints on desired paper type).

⚙️ Engine Specifications

Engine Option 1:

4.1L (250 ci) Cadillac High Technology V8 (HT4100)

Engine Option 2:

5.0L (307 ci) Oldsmobile Rocket V8 (L05/VIN code 8)

Ht4100 Horsepower:

Approximately 130-150 hp (depending on specific tuning/emissions)

Ht4100 Torque:

Approximately 200-210 lb-ft (depending on specific tuning/emissions)

307 V8 Horsepower:

Approximately 140 hp

307 V8 Torque:

Approximately 230 lb-ft

Ht4100 Fuel System:

Throttle Body Injection (TBI)

307 V8 Fuel System:

Throttle Body Injection (TBI)

Ht4100 Vin Code:

9

307 V8 Vin Code:

8

🔧 Transmission

Transmission Type:

4-Speed Automatic (THM 700-R4 / 4L60)

Optional Transmission:

Not applicable for 1989 Brougham (typically only automatic was offered).

Overdrive Gear:

Yes, 4th gear is an overdrive gear for improved fuel economy.

Automatic Transmission Fluid:

Dexron II (or equivalent)

📐 Dimensions

Wheelbase:

115.3 inches (2929 mm)

Overall Length:

212.1 inches (5387 mm)

Overall Width:

76.5 inches (1943 mm)

Overall Height:

54.1 inches (1374 mm)

Curb Weight:

Approximately 4,100 - 4,300 lbs (1860 - 1950 kg) depending on options.

🛡️ Safety Features

Crash Test Ratings:

NHTSA ratings for this era were less standardized than today. The Brougham, with its body-on-frame construction and large mass, offered substantial protection for its time, though side-impact and rollover resistance were areas of improvement in later designs.

Anti Lock Brakes:

Optional (Anti-lock Braking System - ABS), particularly on rear wheels.

Traction Control:

Not typically available for 1989.

Airbags:

Driver-side airbag was optional and became more common in late 1980s luxury vehicles, but not standard on all models/trims.

Seat Belts:

Standard lap and shoulder belts for front occupants, lap belts for rear occupants. Manual specifies SRS components if equipped.

Headrests:

Adjustable front headrests, fixed rear headrests.

💡 Technology Features

Audio System:

Factory-installed AM/FM stereo with cassette player, often with premium speaker options. Manual covers removal, installation, and basic diagnostics.

Navigation:

Not available. Navigation systems were not integrated into consumer vehicles in this era.

Cruise Control:

Standard or optional on most models. Manual covers system operation, diagnosis, and repair.

Multiplex Communication:

The manual mentions 'Multiplex/Can Communication', indicating the presence of early multiplexed wiring systems for controlling various functions, which simplifies wiring but requires specific diagnostic tools and knowledge covered in the manual.

🔧 Maintenance

Oil Change Interval:

Typically every 3,000 miles or 3 months, or as per owner's manual recommendations based on driving conditions. The manual will provide specific intervals.

Tune Up Interval:

Spark plugs, distributor cap, rotor, and wires typically at 30,000-60,000 miles, but the manual will specify based on component type.

Transmission Service:

Fluid and filter change recommended every 30,000-50,000 miles or as specified in the manual.

Engine Oil Specification:

API Service SG, SF, or SE. Viscosity grade typically 5W-30 or 10W-30, depending on ambient temperature. Manual will confirm.

Coolant Specification:

Ethylene glycol based antifreeze, typically a 50/50 mix with distilled water. Check manual for specific type (e.g., conventional green OAT or HOAT).

Brake Fluid Specification:

DOT 3 or DOT 4 hydraulic brake fluid. Manual will confirm exact type.

Ht4100 Engine Concerns:

Known for potential issues with intake manifold gaskets, cylinder head sealing, and camshaft wear due to early designs and materials. Manual will detail diagnostic and repair procedures for these.

Electronic Climate Control:

Early electronic climate control systems can develop issues with sensors, actuators, and control modules. Manual provides diagnostic steps.

Suspension Components:

Wear on ball joints, control arm bushings, and rear air suspension (if equipped) is common with age and mileage. Manual covers inspection and replacement.

📚 Vehicle History

Cadillac Legacy:

Cadillac has a long history of producing luxurious and large American sedans, epitomizing American automotive comfort and prestige.

Brougham Lineage:

The Brougham nameplate has been used by Cadillac on various large, luxurious models. The 1989 model represents the final iteration of the rear-wheel-drive C-body platform chassis, a significant lineage dating back to the Fleetwood Brougham. It was known for its plush ride, spacious interior, and formal styling.

Production Period:

The specific Brougham designation used from 1987-1992 was the final rear-wheel-drive large Cadillac sedan before the platform was downsized and transitioned to front-wheel drive.

Manufacturing Location:

Arlington Assembly, Arlington, Texas, USA.

🏆 Awards & Recognition

Industry Awards:

While specific awards for the 1989 Brougham are not widely publicized, it was recognized as a flagship luxury sedan in its segment for its comfort, quietness, and traditional American luxury appeal.