Class:
Compact/Subcompact Car
Target Audience:
Affordable, reliable transportation for individuals and small families.
Key Competitors:
Honda Civic, Toyota Corolla, Nissan Sentra, Ford Escort, Mazda 323
Design Philosophy:
Emphasis on practicality, fuel efficiency, and Mitsubishi's developing reputation for robust engineering.
Powertrain Options:
Variety of efficient four-cylinder engines.
Availability:
Widespread global availability across multiple generations and facelifts.
Primary Markets:
Global (specific regional variations may exist within the CB/CC platform)
Body Styles:
Sedan, Hatchback (specific body styles covered depend on regional availability and manual scope)
Estimated Page Count:
Refer to actual manual for precise count; factory service manuals of this era typically range from 1000-2500 pages.
Type:
Factory Service & Repair Workshop Manual
Language:
English (likely, standard for international service manuals)
Format:
Digital Download (PDF/equivalent)
Engine:
All gasoline engines (e.g., 4G13, 4G15, 4G91, 4G93 - specific to regional models and manual scope)
Transmission:
Manual and Automatic Transmissions (MT/AT), Clutch System
Drivetrain:
Front-Wheel Drive (FWD), All-Wheel Drive (AWD) where applicable (e.g., Lancer Evolution variants)
Suspension:
Front Suspension (MacPherson Strut), Rear Suspension (Multi-link or Torsion Beam depending on model)
Steering:
Power Steering System, Manual Steering Rack
Brakes:
Front Disc Brakes, Rear Disc or Drum Brakes, ABS (if equipped), Parking Brake System
Electrical:
12V Electrical System, Battery, Alternator, Starter, Ignition System, Lighting, Instrumentation, Fuses, Relays, Wiring Diagrams
Fuel System:
Fuel Injection System (MPI/GDI where applicable), Fuel Pump, Injectors, Fuel Tank, Emission Controls
Cooling System:
Radiator, Water Pump, Thermostat, Cooling Fan, Heater Core
Exhaust System:
Exhaust Manifold, Catalytic Converter, Muffler, Pipes
Body And Interior:
Body Panels, Doors, Hood, Trunk, Bumpers, Seats, Trim, Glass, Windshield Wipers
HVAC:
Heating, Ventilation, Air Conditioning (HVAC) System
Maintenance:
Scheduled Maintenance, Oil Changes, Filter Replacements, Spark Plugs, Belts, Hoses
Troubleshooting:
Diagnostic Fault Codes (DTCs), Symptom-based Diagnostics, Component Testing
Repair:
Engine Overhaul, Transmission Overhaul, Brake Pad Replacement, Suspension Component Replacement, Electrical Component Repair
Overhaul:
Detailed engine and transmission overhaul procedures
Diagnostics:
Step-by-step diagnostic procedures for all major systems
Installation:
Component replacement and installation procedures
Depth:
Comprehensive: From basic fluid checks and adjustments to complete engine and transmission rebuilds, including in-depth electrical schematics and troubleshooting.
Scope:
Factory-level detail, suitable for professional technicians and advanced DIY mechanics.
Engine Code Examples:
4G13, 4G15, 4G91, 4G93
Displacement Examples:
1.3L (1300cc), 1.5L (1500cc), 1.6L (1600cc), 1.8L (1800cc)
Engine Type:
Inline 4-cylinder, SOHC or DOHC
Horsepower Range:
Approximately 70 HP to 140 HP (depending on engine and tuning, e.g., higher for performance variants like GSR)
Torque Range:
Approximately 110 Nm to 180 Nm (depending on engine)
Fuel Delivery:
Electronic Fuel Injection (EFI), Multi-Point Fuel Injection (MPI)
Fuel Type:
Unleaded Gasoline
Coolant Type:
Ethylene Glycol Based (e.g., Mitsubishi DiaQueen Super Long Life Coolant or equivalent 50/50 mix)
Transmission Type Standard:
5-speed Manual Transmission (5MT)
Transmission Type Optional:
3-speed or 4-speed Automatic Transmission (AT)
Clutch Type:
Dry Single Plate Clutch (Manual Transmission)
Manual Transmission Fluid:
API GL-4 SAE 75W-90 or SAE 75W-85 Gear Oil (refer to manual for specific viscosity and capacity)
Automatic Transmission Fluid:
Mitsubishi DiaQueen ATF SP-II or SP-III equivalent (refer to manual for specific type and capacity)
Oil Change Interval:
Typically every 5,000 - 7,500 miles (8,000 - 12,000 km) or 6-12 months, whichever comes first. (Refer to manual for precise recommendation).
Air Filter Replacement:
Every 15,000 - 30,000 miles (24,000 - 48,000 km) or as needed based on driving conditions. (Refer to manual).
Spark Plug Replacement:
Every 30,000 - 60,000 miles (48,000 - 96,000 km) depending on plug type (standard vs. platinum). (Refer to manual).
Timing Belt Replacement:
Crucial maintenance item for interference engines. Typically recommended every 60,000 - 90,000 miles (96,000 - 144,000 km) or 4-7 years. (Refer to manual for engine-specific interval).
Engine Oil Type:
API SG/SH, SAE 5W-30 or 10W-30 (refer to manual for specific viscosity and API service classification for your region and engine).
Engine Oil Capacity:
Approximately 3.5 - 4.5 Liters (including filter) depending on engine. (Refer to manual).
Brake Fluid Type:
DOT 3 or DOT 4 (refer to manual for specific requirement).
Power Steering Fluid:
Mitsubishi Genuine Power Steering Fluid or Dexron II/III ATF (refer to manual).
Engine Mounts:
Can degrade over time leading to increased vibration.
Timing Belt Failure:
Critical to adhere to replacement intervals as these engines are often interference types, leading to catastrophic valve damage if the belt breaks.
Suspension Bushings:
Wear can lead to clunking noises and poor handling.
Radiator Corrosion:
Older radiators may develop leaks or blockages; regular coolant flushes are important.
Electrical Connectors:
Corrosion in connectors or grounds can lead to intermittent electrical issues.
Brand Focus:
Mitsubishi Motors Corporation's history of developing reliable and often performance-oriented vehicles.
Colt Lancer Lineage:
The Lancer nameplate has a long history, evolving through multiple generations. The 1992-1995 models represent the fifth generation, codenamed CB/CC, which saw significant styling updates and platform enhancements.
Key Variants:
Included entry-level models, higher-spec models (e.g., GT, GTI), and performance-oriented variants like the Lancer Evolution (EVO III being part of this generation).
Production Years:
1992-1995 (for the CB/CC generation)
Manufacturing Locations:
Japan (primarily), and potentially assembly plants in other regions globally.
