Applicable Model Years:
1996, 1997, 1998, 1999, 2000, 2001
Estimated Page Count:
Extensive (not specified, but implied as complete)
Manual Type:
Workshop Repair and Service Manual
Supported Languages:
English, German, French, Italian
Engine:
Complete overhaul, diagnosis, timing, cooling, lubrication, fuel system, ignition system, exhaust system, emission control
Transmission:
Manual gearbox disassembly, assembly, adjustment, and repair procedures
Drivetrain:
Rear-wheel drive system, axle shafts, differential maintenance and repair
Brakes:
Hydraulic system, ABS, component inspection, service, and repair
Suspension:
Front and rear suspension systems, shock absorbers, springs, bushings, alignment
Steering:
Power steering system, steering rack, linkages, adjustments
Electrical System:
Battery, charging system, starter, ignition, lighting, body electronics, wiring diagrams, diagnosis
Climate Control:
Air conditioning system, heating, ventilation, component service
Bodywork:
Exterior panels, doors, hood, trunk, interior trim, glass replacement
Fuel System:
Fuel pump, injectors, lines, fuel tank, evaporative emission control
Exhaust System:
Exhaust manifolds, catalytic converters, mufflers, pipes, oxygen sensors
Maintenance:
Regular servicing, fluid changes, filter replacements, lubrication
Troubleshooting:
Diagnostic procedures, fault code interpretation, symptom-based troubleshooting
Repair:
Component replacement, system overhaul, rebuilding procedures
Adjustment:
Idle speed, throttle linkage, clutch, suspension geometry, lighting
Diagnosis:
Use of diagnostic tools, parameter interpretation, sensor testing
Engine Rebuild:
Detailed steps for engine disassembly, inspection, and reassembly
Transmission Rebuild:
Comprehensive guide for manual gearbox disassembly and reassembly
Electrical Diagnostics:
Wiring diagrams, circuit testing, component diagnostics
Engine Tuning:
Includes procedures for idle speed adjustment and basic tuning parameters as indicated in excerpts.
Clutch Replacement:
Detailed steps for clutch assembly and disassembly are implied given the gearbox removal procedures.
Depth Of Coverage:
Comprehensive, covering all aspects from basic maintenance to complete overhaul and advanced diagnostics
Engine Code:
F133 B (early production), F133 E (later production)
Engine Type:
Naturally aspirated V12
Displacement:
5.5 Liters (5474 cc)
Bore X Stroke:
85 mm x 80 mm
Compression Ratio:
10.1:1
Valvetrain:
DOHC, 4 valves per cylinder
Fuel Delivery:
Bosch Motronic M5.2 or M5.2.1 engine management, multi-point fuel injection
Horsepower:
485 PS (478 hp; 357 kW) at 7000 rpm
Torque:
569 Nm (419 lb-ft) at 5000 rpm
Fuel Type:
Unleaded gasoline (premium)
Fuel Tank Capacity:
104 Liters (27.5 US gal)
Major Service Interval:
Typically every 10,000 - 15,000 miles or annually, with comprehensive checks and fluid changes.
Timing Belt Replacement:
Refer to manual; typically a significant interval for V12 engines, but crucial maintenance item.
Engine Oil Type:
Refer to manual for specific viscosity and API/ACEA specifications (e.g., Mobil 1 15W-50 often recommended).
Engine Oil Capacity:
Approx. 12.5 Liters (13.2 US qt)
Coolant Type:
Ethylene glycol based antifreeze, mixed with distilled water (e.g., Shellgard or equivalent)
Transmission Fluid:
Specific manual transmission fluid, e.g., SAE 75W-90 synthetic gear oil
Brake Fluid Type:
DOT 4 or higher (e.g., Castrol SRF or similar high-performance fluid)
Differential Fluid:
Specific limited-slip differential (LSD) fluid, e.g., SAE 75W-140 synthetic gear oil with friction modifier
Common Wear Items:
Clutch wear, suspension bushings, exhaust system components, various electronic sensors
Electrical Gremlins:
Can be susceptible to minor electrical issues due to complex wiring and age, often related to connectors or grounding.
Timing Belt Tensioner:
While not a belt, the tensioner system for the V12 is critical and requires proper inspection and maintenance as per the manual.