Engine System:
Detailed overhaul, diagnosis, lubrication, cooling, fuel, exhaust, ignition, and emission control systems.
Transmission System:
Maintenance, repair, and overhaul of automatic transmission (e.g., ZF 5HP24).
Drivetrain System:
Front suspension, rear suspension, steering system, propeller shaft, differential, driveshafts, and wheel bearings.
Braking System:
Front and rear brakes, ABS system, parking brake, hydraulic lines, and components.
Electrical System:
Comprehensive wiring diagrams, battery, charging system, ignition system, lighting, instruments, power windows, seats, and audio systems.
Body And Chassis:
Body construction, exterior panels, doors, windows, interior trim, seats, bumpers, and structural components.
HVAC System:
Air conditioning, heating, and ventilation system components and repair procedures.
Fuel System:
Fuel tank, pump, lines, injectors, and evaporative emission control (EVAP).
Emission Control:
Diagnosis and repair of emissions-related components and systems, including catalytic converters, O2 sensors, and EVAP.
Chassis And Suspension:
Detailed procedures for suspension alignment, component replacement (shocks, springs, control arms), and steering system servicing.
Routine Maintenance:
Periodic maintenance charts, oil changes, filter replacements, fluid checks, and lubrication.
Diagnostic Procedures:
Troubleshooting guides, symptom-based diagnostics, and fault code interpretations.
Repair Procedures:
Step-by-step instructions for component removal, installation, and repair.
Overhaul Procedures:
Detailed instructions for complete engine and transmission rebuilds.
Wiring Diagrams:
Comprehensive and detailed electrical schematics for all vehicle systems.
Technical Specifications:
Torque values, clearances, fluid capacities, and adjustment specifications.
Troubleshooting:
Comprehensive fault finding charts and diagnostic sequences for common and intermittent issues.
Recalibration:
Procedures for recalibrating various electronic modules and sensors after component replacement.
Depth:
Suitable for professional technicians and advanced DIY mechanics. Covers everything from routine maintenance to complete engine and transmission overhauls.
Oil Change Interval:
Typically every 10,000 miles (16,000 km) or 12 months, whichever comes first, using synthetic oil.
Transmission Fluid Change:
Recommended every 60,000 miles (96,000 km) or as per manual specific recommendations.
Coolant Change:
Initial change at 100,000 miles, then every 50,000 miles thereafter, using Jaguar-approved coolant.
Engine Oil Type:
SAE 5W-30 or 10W-30 Fully Synthetic Engine Oil (API SJ/SL or ACEA A3/B3/B4)
Coolant Type:
Jaguar-spec Anti-freeze/Anti-boil (Ethylene Glycol based, typically pink or orange)
Brake Fluid Type:
DOT 3 or DOT 4 brake fluid.
Known Issues 1:
Timing chain tensioner wear (especially on early AJ-V8 engines), Nikasil cylinder liner degradation (on early production, though less common on later engines), water pump bearing failure, automatic transmission torque converter issues.
Known Issues 2:
Plastic coolant pipes can become brittle, ABS hydraulic unit failures, RCM (Restraint Control Module) faults.
