🏷️ Basic Information

Make:

Mazda / Ford

Model:

B-Series / Ranger

Model Line Name:

Drifter

Vehicle Platform Code:

UN (Fourth Generation Mazda B-Series, shared with Ford Ranger)

👋 Introduction

Market Segment:

Compact Pickup Truck

Target Audience:

DIY mechanics, automotive repair shops, owners seeking to maintain or repair their vehicles.

Competitors:

Ford Ranger, Toyota Tacoma, Nissan Frontier, Chevrolet S-10/Colorado, GMC Sonoma/Canyon.

Value Proposition:

Cost savings through self-repair, comprehensive coverage, detailed instructions, instant access.

Convenience:

Downloadable for offline use on multiple devices, printable sections.

📋 Manual Details

Applicable Years:

1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006

Models Covered:

All Models, Engines, Trim Levels, and Transmission Types

Format:

Digital Download (PDF)

Compatibility:

All PC & MAC Computers, Tablets, Smartphones

Required Software:

Adobe Reader (free download)

Page Count:

Not Specified (Typically 1000+ pages for full workshop manuals)

Language:

English

Manual Type:

Complete Workshop Service Repair Manual

📖 Manual Coverage

Engine Mechanical:

Engine assembly, cylinder head, block, crankshaft, pistons, connecting rods, lubrication system, cooling system, fuel system (mechanical aspects).

Engine Electrical:

Ignition system, starter motor, alternator, engine control module (ECM) wiring and diagnostics, sensors (MAF, MAP, O2, CKP, CMP), fuel injectors (electrical aspects).

Transmission Manual:

Clutch system, gear selection, gearbox disassembly and assembly, torque specifications, fluid types.

Transmission Automatic:

Automatic transmission operation, hydraulic control, valve body, torque converter, solenoids, electronic controls, fluid service.

Drivetrain:

Driveshafts, universal joints, rear axle, differential, axle bearings, seals, lubrication.

Suspension:

Front suspension (independent, torsion bar or coil spring), rear suspension (leaf springs), control arms, ball joints, bushings, shock absorbers, struts, alignment specifications.

Steering:

Power steering system, steering rack, tie rods, steering column, steering wheel, alignment.

Brakes:

Front disc brakes, rear drum or disc brakes, master cylinder, brake booster, ABS system, hydraulic lines, brake fluid specifications, bleeding procedures.

Electrical Chassis:

Lighting system (headlights, taillights, interior), battery, charging system, fuses, relays, wiring diagrams, horn, wipers, power windows, power locks.

Body Exterior:

Body panel removal and installation, doors, hood, tailgate, bumpers, glass, seals, body repairs (minor dents, rust), paint color codes (often separate).

Body Interior:

Dashboard, instrument panel, seating, upholstery, trim panels, headliner, HVAC controls, audio system, airbag system (components and removal precautions).

HVAC:

Heating, Ventilation, and Air Conditioning system, refrigerant types, components (compressor, condenser, evaporator, blower motor), leak testing, recharging.

Fuel System:

Fuel tank, fuel pump, fuel lines, fuel filter, fuel injection system (electronic controls), evaporative emission control (EVAP) system.

Maintenance:

Oil changes, filter replacements, fluid checks and changes, tire rotation, brake inspection, battery testing, belt and hose inspection.

Troubleshooting:

Diagnostic flowcharts for common problems, symptom-based diagnosis, OBD-II code interpretation and solutions.

Repair:

Step-by-step instructions for component removal, overhaul, and reinstallation for all major systems.

Diagnostics:

Detailed diagnostic procedures for electrical and mechanical systems, including specific test procedures for sensors and actuators.

Specifications:

Torque specifications for all fasteners, clearance measurements, fluid capacities, tire pressures, alignment angles.

Depth:

Comprehensive (A-Z coverage of all service and repair procedures)

Detail Level:

Includes detailed step-by-step instructions, diagrams, illustrations, and troubleshooting guides.

📊 Manual Specifications

File Format:

PDF

Print Quality:

High Quality, Printable

Binding Type:

N/A (Digital Download)

Paper Type:

N/A (Digital Download)

⚙️ Engine Specifications

Engine Option 1 Code:

G6 (2.5L OHV 4-Cylinder)

Engine Option 1 Displacement:

2.5 Liters (152.8 cubic inches)

Engine Option 1 Configuration:

Inline-4

Engine Option 1 Horsepower Est:

Approx. 110-120 hp @ 4800-5000 rpm

Engine Option 1 Torque Est:

Approx. 140-150 lb-ft @ 2500-3000 rpm

Engine Option 1 Fuel System:

Multi-port Fuel Injection (MPI)

Engine Option 1 Block Material:

Cast Iron

Engine Option 1 Head Material:

Aluminum

Engine Option 2 Code:

WL-C (2.5L Turbo Diesel - less common in some markets)

Engine Option 2 Displacement:

2.5 Liters (152.8 cubic inches)

Engine Option 2 Configuration:

Inline-4

Engine Option 2 Horsepower Est:

Approx. 80-90 hp

Engine Option 2 Torque Est:

Approx. 120-130 lb-ft

Engine Option 2 Fuel System:

Direct Injection, Turbocharged

Engine Option 3 Code:

G6E / G6G (3.0L SOHC V6)

Engine Option 3 Displacement:

3.0 Liters (182.9 cubic inches)

Engine Option 3 Configuration:

V6

Engine Option 3 Horsepower Est:

Approx. 145-155 hp @ 5000-5500 rpm

Engine Option 3 Torque Est:

Approx. 170-185 lb-ft @ 3500-4000 rpm

Engine Option 3 Fuel System:

Multi-port Fuel Injection (MPI)

Engine Option 3 Block Material:

Aluminum

Engine Option 3 Head Material:

Aluminum

Engine Option 4 Code:

G6E-T / G6G-T (3.0L SOHC V6 with Variable Valve Timing - VVT)

Engine Option 4 Displacement:

3.0 Liters (182.9 cubic inches)

Engine Option 4 Configuration:

V6 (SOHC with VVT)

Engine Option 4 Horsepower Est:

Approx. 150-160 hp @ 5000-5500 rpm

Engine Option 4 Torque Est:

Approx. 180-190 lb-ft @ 3500-4000 rpm

Engine Option 4 Fuel System:

Multi-port Fuel Injection (MPI)

Engine Option 4 Block Material:

Aluminum

Engine Option 4 Head Material:

Aluminum

🔧 Transmission

Standard Transmission Type:

5-Speed Manual Transmission

Optional Transmission Type:

4-Speed Automatic Transmission

Drive Layout:

Rear-Wheel Drive (RWD) or Four-Wheel Drive (4WD)

Transfer Case Type:

Manual or Electronic Shift (for 4WD models)

📐 Dimensions

Wheelbase Standard:

Approx. 114.5 inches (2908 mm)

Overall Length Standard:

Approx. 191.6 inches (4867 mm)

Overall Width Standard:

Approx. 71.5 inches (1816 mm)

Overall Height Standard:

Approx. 66.0 inches (1676 mm)

Ground Clearance Standard:

Approx. 7.5-8.5 inches (190-216 mm, varies with trim/drivetrain)

Bed Length Short:

Approx. 71.5 inches (1816 mm)

Bed Length Long:

Approx. 81.5 inches (2070 mm)

Curb Weight Est:

Approx. 3500-4000 lbs (1588-1814 kg, varies with configuration)

Towing Capacity Est:

Up to 5000 lbs (2268 kg, with V6 and proper towing package)

Payload Capacity Est:

Up to 1500 lbs (680 kg, varies with configuration)

🛡️ Safety Features

NHTSA Rollover Rating Est:

3 out of 5 stars (Typical for this class and era)

Antilock Brakes ABS:

Optional on many models, standard on higher trims or later years.

Traction Control:

Rarely standard, may have been an option on some later models.

Airbags Driver:

Standard driver's airbag.

Airbags Passenger:

Optional passenger airbag on some models, standard on later years.

Seatbelts:

3-point front seat belts, lap belts in rear (if applicable).

💡 Technology Features

Audio System:

Standard AM/FM radio, optional CD player, cassette player, and premium sound systems depending on trim level.

Speakers:

Typically 2 or 4 speakers, with optional upgrade to 6 or 8.

Cruise Control:

Optional on most models, standard on higher trims.

Auxiliary Input:

Not standard; aftermarket solutions may be available.

🔧 Maintenance

Engine Oil Change Interval:

Every 3,000-5,000 miles (4,800-8,000 km) or 3-6 months, depending on driving conditions and oil type.

Engine Oil Filter Replacement:

Replace with oil change.

Transmission Fluid Change Manual:

Check at 30,000 miles (48,000 km), change if necessary or at 60,000 miles (96,000 km).

Transmission Fluid Change Automatic:

Check at 30,000 miles (48,000 km), change filter and fluid every 45,000-60,000 miles (72,000-96,000 km).

Coolant Flush Interval:

Every 30,000-50,000 miles (48,000-80,000 km) or 2-3 years.

Spark Plug Replacement 4Cyl:

Every 60,000-100,000 miles (96,000-160,000 km), depending on plug type (copper vs. iridium/platinum).

Spark Plug Replacement V6:

Every 100,000 miles (160,000 km) for iridium plugs.

Engine Oil Type 4Cyl:

API SG or SH, SAE 5W-30 or 10W-30 (check manual for specific viscosity based on temperature).

Engine Oil Type V6:

API SG or SH, SAE 5W-30 (check manual for specific viscosity).

Engine Coolant Type:

Ethylene Glycol based, typically a green coolant. Consult manual for specific OEM recommendation or equivalent (e.g., Havoline Dex-Cool compatible).

Transmission Fluid Type Manual:

GL-4 SAE 75W-90 Gear Oil.

Transmission Fluid Type Automatic:

MERCON V or equivalent (e.g., Dexron III compatible).

Brake Fluid Type:

DOT 3.

Power Steering Fluid Type:

Dexron III or equivalent ATF.

Differential Fluid Type:

GL-5 SAE 75W-90 or 80W-90 Gear Oil (check manual for specific application, especially for LSDs).

Intake Manifold Gaskets:

Leaking intake manifold gaskets (especially on V6 engines) can cause vacuum leaks and rough idling.

Oxygen Sensors:

Failure of oxygen sensors can lead to poor fuel economy and check engine lights.

Ignition Coils V6:

Ignition coil failure can cause misfires and rough running on V6 engines.

Rust On Frame:

Frame rust, particularly in areas with road salt, can be a significant issue, impacting structural integrity.

Automatic Transmission Slipping:

Older automatic transmissions may exhibit slipping or hard shifting, often due to worn clutches or solenoid issues.

📚 Vehicle History

Mazda Truck Heritage:

Mazda has a long history of producing robust and affordable light trucks, often sharing platforms with other manufacturers.

Fourth Generation Un:

This generation (1998-2006) was a significant redesign, sharing its platform extensively with the Ford Ranger. It offered improved styling, safety, and powertrain options compared to its predecessors.

Ford Collaboration:

The Mazda B-Series and Ford Ranger were developed in parallel under a strategic alliance, leading to high commonality in chassis, powertrain, and major components.

Production Years Generation:

1998-2006 (Fourth Generation)

Manufacturing Locations:

Primarily assembled in North America (USA) and Mexico.

🏆 Awards & Recognition

Model Recognition:

The Mazda B-Series/Ford Ranger platform was generally well-regarded for its reliability and capability in the compact pickup segment during its production run.