Engine Mechanical:
Engine assembly, cylinder head, valve train, piston rings, crankshaft, camshafts, timing system, oil pump, oil cooler, lubrication system.
Engine Management:
Fuel injection system (Bosch ME 2.0), ignition system, electronic engine control unit (ECU), sensor diagnostics, emission controls, idle speed control, OBD-II diagnostics.
Transmission:
5-speed automatic transmission (722.6 '5G-TRONIC'), transmission control unit (TCU), hydraulic system, gear shift mechanisms, fluid specifications, filter replacement, torque converter.
Brakes:
Hydraulic brake system, Anti-lock Braking System (ABS) (e.g., Bosch 5.3 or similar), brake discs, brake pads, brake calipers, brake fluid specifications, bleeding procedures, parking brake.
Suspension:
Front suspension (double wishbone), rear suspension (multi-link independent), shock absorbers, springs, bushings, sway bars, self-leveling suspension (if equipped), hydraulic suspension components.
Steering:
Hydraulic power steering system, steering rack, power steering pump, steering column, alignment specifications.
Electrical System:
12V electrical system, battery, alternator, starter motor, wiring diagrams, fuses, relays, lighting systems (headlights, taillights, interior), power windows, power locks, power seats, sunroof operation.
Climate Control:
Automatic climate control (ACC), HVAC system, A/C compressor, refrigerant specifications, blower motor, temperature sensors, air distribution.
Body And Interior:
Body panel removal and installation, door mechanisms, hood and trunk latches, interior trim panels, upholstery, sound deadening, paint codes, rust prevention.
Safety Systems:
Airbag system (SRS), seat belt mechanisms, restraint system diagnostics, emergency trunk release.
Scheduled Maintenance:
Oil and filter changes, air filter replacement, fuel filter replacement, spark plug replacement, coolant flush and replacement, brake fluid flush, transmission fluid and filter service.
Diagnostic Procedures:
Troubleshooting guides for common symptoms, diagnostic trouble codes (DTCs) interpretation, wiring harness testing, sensor testing, component testing using specialized tools (e.g., STAR diagnosis).
Repair Procedures:
Step-by-step instructions for component removal, disassembly, inspection, repair, and reassembly of all major vehicle systems.
Electrical Diagnostics:
Detailed wiring diagrams with component identification, troubleshooting flowcharts for electrical faults, testing procedures for circuits and components.
Engine Rebuild:
Full engine disassembly and reassembly procedures, torque specifications for critical fasteners, cylinder bore honing, piston and ring installation, bearing clearance checks.
Transmission Overhaul:
Detailed steps for transmission removal, disassembly, inspection of clutches, seals, and hydraulic components, reassembly, and filling with correct fluid.
Brake System Service:
Brake pad and rotor replacement, caliper service, ABS component testing, brake line replacement, bleeding procedures.
Suspension Component Replacement:
Replacement of shock absorbers, control arms, ball joints, tie rods, and other suspension parts, including alignment specifications.
Body Panel Repair:
Instructions for removing and installing body panels, door hinges, trunk lid, and associated trim, as well as basic bodywork and dent repair.
Interior Component Service:
Removal and installation of dashboard components, door panels, seating, and other interior trim for access to underlying systems.
Technical Depth:
Comprehensive: Covers basic maintenance to advanced diagnostic and repair procedures, including detailed specifications and torque values for all components. Suitable for professional technicians and advanced DIY enthusiasts.
Oil Change Interval:
Typically every 7,500 - 10,000 miles or annually, using synthetic oil. Consult the manual for the 'Service A' or 'Service B' intervals.
Transmission Service Interval:
Every 40,000 - 60,000 miles for fluid and filter change. Check manual for specific recommendations.
Spark Plug Replacement Interval:
Typically every 60,000 - 100,000 miles for iridium or platinum plugs, depending on type. Refer to manual for exact interval.
Brake Fluid Flush Interval:
Every 2 years, regardless of mileage.
Power Steering Fluid:
MB Specification 236.3 hydraulic fluid (or equivalent)
Coolant Type:
MB 325.0 specification coolant (typically a green ethylene glycol-based coolant)
Known Issues:
Common issues on the W140 include: Headlight leveling system failure, coolant leaks from the 'octopus' connector or oil cooler seals, ABS/ASR warning lights due to wheel speed sensor or control module issues, sagging headliner, window regulator failures, catalytic converter failure (rare but costly), and SRS system faults.
Common Repairs:
Regular replacement of front and rear brake pads and rotors, suspension bushings, and front shock absorbers due to wear. Addressing minor coolant leaks promptly is crucial to prevent catastrophic engine damage.