Engine:
Engine mechanical (cylinder head, block, pistons, crankshaft, camshafts), lubrication system, cooling system, fuel injection system, ignition system, exhaust system, emissions control.
Transmission:
Manual transmission (clutch, gear shift, internal components), Automatic transmission (torque converter, valve body, planetary gear sets, hydraulic control), transmission control systems.
Drivetrain:
Front-wheel drive system, drive shafts, CV joints, differential, axle shafts.
Suspension:
Front suspension (struts, control arms, ball joints, bushings), Rear suspension (torsion beam, shock absorbers, bushings), wheel alignment specifications.
Steering:
Manual steering system, power steering system (pump, reservoir, steering rack/gearbox, hydraulic lines), steering column.
Brakes:
Front disc brakes, rear drum brakes, parking brake system, brake lines, master cylinder, brake fluid specifications, ABS (if equipped).
Electrical:
Battery, charging system (alternator), starting system (starter motor), lighting system (headlights, taillights, interior lights), ignition switch, fuses, relays, wiring diagrams, body control modules, sensors.
HVAC:
Air conditioning system (compressor, refrigerant, evaporator, condenser), heating system (heater core), blower motor, climate control panels.
Body And Trim:
Exterior body panels, interior trim, door mechanisms, glass, bumpers, seals, paint codes (potentially).
Chassis And Frame:
Frame construction, underbody components, chassis integrity.
Maintenance:
Oil changes, filter replacements, fluid checks and changes, spark plug replacement, belt inspection and replacement, brake pad replacement, tire rotation.
Diagnostics:
Troubleshooting guides, diagnostic trouble codes (DTCs), testing procedures for components, symptom-based diagnosis.
Repair:
Component removal and installation, rebuilding procedures for major components (engine, transmission), body panel repair, electrical component repair.
Adjustment:
Valve adjustment (if applicable), clutch adjustment, parking brake adjustment, wheel alignment settings.
Rebuilding:
Detailed procedures for engine and transmission rebuilds, including clearances, torque specifications, and component replacements.
Depth:
Comprehensive, covering all aspects from basic scheduled maintenance to complete engine and transmission overhauls. Includes detailed diagrams, schematics, and step-by-step instructions.
Engine Code:
4G13 (1.3L), 4G15 (1.5L)
Engine Type:
Inline 4-cylinder, SOHC (Single Overhead Camshaft)
Displacement 1.3L:
1298 cc (79.2 cu in)
Displacement 1.5L:
1498 cc (91.4 cu in)
Horsepower 1.3L:
Approx. 73-80 hp @ 6000 rpm
Torque 1.3L:
Approx. 78-83 lb-ft @ 3500 rpm
Horsepower 1.5L:
Approx. 86-92 hp @ 6000 rpm
Torque 1.5L:
Approx. 94-98 lb-ft @ 3500 rpm
Fuel Delivery:
Multi-point Fuel Injection (MPI)
Fuel Type:
Unleaded gasoline (87 octane or higher recommended)
Ignition System:
Electronic ignition, Distributorless Ignition System (DIS) on some variants
Emission Standard:
EPA/CARB compliant for the model year
Transmission Type Standard:
5-speed manual transmission
Transmission Type Optional:
3-speed or 4-speed automatic transmission
Transmission Fluid Manual:
API GL-4, SAE 75W-90 gear oil (check manual for specific type)
Transmission Fluid Automatic:
DIAQueen ATF-SP III or equivalent (check manual for specific type)
Clutch Type:
Dry, single-plate, diaphragm spring
Length:
Approx. 3975-4030 mm (156.5-158.7 in)
Width:
Approx. 1670-1680 mm (65.7-66.1 in)
Height:
Approx. 1370-1395 mm (53.9-55.0 in)
Wheelbase:
Approx. 2440 mm (96.1 in)
Wheelbase Coupe:
Approx. 2470 mm (97.2 in)
Curb Weight Min:
Approx. 970 kg (2138 lbs)
Curb Weight Max:
Approx. 1080 kg (2381 lbs)
Gross Vehicle Weight Rating:
Typically around 1400-1500 kg
Oil Change Interval:
Every 5,000 miles or 6 months, whichever comes first (under normal driving conditions)
Air Filter Replacement:
Every 15,000-30,000 miles or as needed based on driving environment
Spark Plug Replacement:
Every 30,000-60,000 miles depending on spark plug type (copper vs. platinum)
Timing Belt Replacement:
Every 60,000-100,000 miles or 5-7 years (crucial maintenance item for interference engines)
Engine Oil Capacity:
Approx. 3.5-4.0 liters (3.7-4.2 US quarts) with filter change (refer to manual for exact spec)
Engine Oil Viscosity:
10W-30 or 5W-30 (refer to manual for temperature specific recommendations)
Coolant Capacity:
Approx. 4.5-5.0 liters (4.7-5.3 US quarts) of 50/50 antifreeze/water mix
Brake Fluid Type:
DOT 3 or DOT 4 (check manual for exact specification)
Common Wear Items:
CV joints, wheel bearings, exhaust system components, engine mounts, clutch wear (manual transmission), radiator and hoses.
Electrical Quirks:
Occasional issues with power window motors, door lock actuators, and alternator failure.
Engine Performance Issues:
Carbon buildup on valves, minor oil leaks from valve cover gaskets, ignition system component failures (spark plugs, coils).
Transmission Issues:
Synchro wear in manual transmissions, potential for automatic transmission fluid leaks or sluggish performance if not maintained.
Mitsubishi History:
Mitsubishi Motors has a long history in automotive manufacturing, known for reliable and fuel-efficient vehicles.
Mirage Generations:
The 1998 model represents the second generation of the Mitsubishi Mirage, which spanned from 1991 to 1995, and its successor, the global Mirage/Colt model range which continued through the late 1990s and early 2000s. This manual likely covers the later iterations of the E-platform based Mirage.
Production Years Platform:
Second generation Mirage platform production: 1991-1995. Subsequent models shared components and design cues.
Manufacturing Locations:
Primarily Japan, with assembly also occurring in other international locations depending on market.