Engine Mechanical:
Engine assembly, cylinder head, pistons, crankshaft, camshafts, timing, lubrication, cooling, intake, exhaust, fuel delivery (mechanical).
Engine Electrical:
Ignition system, starter motor, alternator, ECU, sensors, wiring diagrams, diagnostic trouble codes (DTCs).
Transmission Manual:
Clutch, gearbox, shift mechanism, linkages, gear oil specifications.
Transmission Automatic:
Transmission assembly, valve body, torque converter, planetary gears, automatic transmission fluid (ATF) specifications and procedures, electronic control.
Drivetrain:
Front-wheel drive (FWD) system, drive shafts, CV joints, differential.
Suspension:
Front suspension (struts, control arms, ball joints, anti-roll bar), rear suspension (multi-link independent suspension), shock absorbers, springs, bushings.
Steering:
Power steering system (hydraulic or electric), steering rack, tie rods, steering column, alignment specifications.
Brakes:
Front and rear brake systems, disc brakes, brake calipers, pads, rotors, brake fluid specifications, ABS (Anti-lock Braking System), DSC (Dynamic Stability Control) system.
Electrical System:
Battery, charging system, lighting (headlights, taillights, interior), fuses, relays, power windows, locks, mirrors, wipers, horn.
Climate Control:
HVAC (Heating, Ventilation, and Air Conditioning) system, refrigerant type (R134a), compressor, condenser, evaporator, cabin air filter replacement.
Body And Chassis:
Body panel removal and installation, door mechanisms, hood, trunk lid, bumpers, chassis structure, corrosion protection.
Interior:
Seat removal, dashboard disassembly, trim panel replacement, airbag system safety precautions.
Safety Systems:
Airbag system (SRS - Supplemental Restraint System), seat belt pre-tensioners, passive safety features, diagnostic procedures for safety systems.
Maintenance Procedures:
Scheduled maintenance (oil changes, filter replacements, spark plugs, coolant flushes), brake service, tire rotation, battery testing.
Troubleshooting Guides:
Step-by-step diagnostic procedures for common and uncommon faults, symptom-based troubleshooting.
Repair Procedures:
Detailed instructions for component replacement, overhaul, and repair for all major systems.
Diagnostic Procedures:
On-board diagnostics (OBD-II), scan tool usage, interpreting diagnostic trouble codes (DTCs), live data analysis.
Torque Specifications:
Precise torque values for all critical fasteners (engine, transmission, suspension, brakes, body).
Wiring Diagrams:
Comprehensive electrical wiring schematics for all vehicle circuits.
Technical Depth:
Comprehensive, from basic maintenance to complete engine and transmission rebuilds, including advanced diagnostics and electrical troubleshooting.
Engine Code And Description:
Commonly available with the MZR series engines: 2.5L L5-VE (inline-4, naturally aspirated) and in some markets, the 3.7L MZI-VE (V6, naturally aspirated).
Horsepower 2.5L:
Approximately 167-170 hp @ 6000 rpm (depending on market and specific tune).
Torque 2.5L:
Approximately 167-170 lb-ft @ 4000-4500 rpm.
Horsepower 3.7L V6:
Approximately 273 hp @ 6200 rpm.
Torque 3.7L V6:
Approximately 270 lb-ft @ 4000 rpm.
Fuel Delivery:
Electronic Fuel Injection (EFI), multi-point injection.
Fuel Type:
Unleaded gasoline, 87 octane (or higher recommended for optimal performance).
ECU:
Engine Control Unit (ECU) with integrated diagnostics.
Standard Transmission 2.5L
Type 2.5L:
6-speed manual transmission.
Optional Transmission 2.5L
Type 2.5L:
5-speed automatic transmission with sequential shift mode.
Type 3.7L V6:
6-speed automatic transmission.
Transmission Fluid 2.5L At:
Mazda ATF JWS3309 (or equivalent).
Transmission Fluid 3.7L At:
Mazda ATF FZ (or equivalent).
Transmission Fluid Manual:
GL-4 SAE 75W-90 gear oil.
Service Intervals General
Oil Change Interval:
Typically every 5,000 miles (8,000 km) or 6 months, whichever comes first, or using the vehicle's oil life monitoring system.
Air Filter Replacement:
Recommended every 15,000 - 30,000 miles (24,000 - 48,000 km) or as needed based on driving conditions.
Cabin Air Filter:
Recommended every 15,000 - 30,000 miles (24,000 - 48,000 km) or annually.
Spark Plug Replacement:
Iridium-tipped spark plugs typically have a longer service life, often around 75,000 - 100,000 miles (120,000 - 160,000 km).
Engine Oil Type:
0W-20 synthetic engine oil is typically recommended for the 2.5L engine. Check owner's manual for specific viscosity grade and API service classification.
Coolant Type:
Mazda Super Long Life Coolant (SLLC), or an equivalent ethylene glycol-based coolant with long-life additives, typically a pink or orange color.
Brake Fluid Type:
DOT 3 or DOT 4 brake fluid.
Common Problem 1:
Oil consumption in higher mileage 2.5L engines, potentially related to piston ring wear or PCV system issues. The manual will detail checks and potential fixes.
Common Problem 2:
Corrosion on the rear subframe and suspension components, especially in regions with road salt. Manual provides inspection points and repair procedures.
Common Problem 3:
Check engine lights related to evaporative emissions system (EVAP) faults, often due to a faulty purge valve or gas cap. Manual includes diagnostic steps.
Common Problem 4:
Infotainment system glitches or screen issues in some models. Manual covers basic system resets and potential component troubleshooting.
Common Problem 5:
Automatic transmission shift quality issues or hesitation, particularly in older transmissions. Manual provides diagnostic procedures and fluid service recommendations.