Engine Mechanical:
Engine assembly, cylinder head, block, pistons, crankshaft, camshafts, valve train, timing system, lubrication system, cooling system, intake system, exhaust system.
Engine Electrical:
Ignition system, starting system, charging system, engine control system (ECU), sensors, actuators, fuel injection system, emissions control.
Transmission Manual:
Manual transmission assembly, clutch system, shift mechanism, gears, bearings, seals, fluid specifications.
Transmission Automatic:
Automatic transmission assembly (including CVT where applicable), torque converter, hydraulic control system, electronic control unit (TCU), planetary gear sets, clutch packs, fluid specifications.
Drivetrain:
Front-wheel drive (FWD), All-Wheel Drive (AWD) system (where equipped), propeller shaft, differential, axles, CV joints, hub bearings.
Suspension:
Front suspension (MacPherson strut, stabilizer bar), rear suspension (multi-link), shock absorbers, springs, control arms, ball joints, bushings, wheel alignment specifications.
Steering:
Power steering system (hydraulic or electric), steering column, steering rack, tie rods, power steering fluid specifications.
Brakes:
Front and rear brake systems (disc brakes), brake calipers, brake pads, brake rotors, brake lines, master cylinder, brake booster, ABS (Anti-lock Braking System), EBD (Electronic Brakeforce Distribution), parking brake system, brake fluid specifications.
Body:
Body construction, panels, doors, hood, trunk, bumpers, glass, seals, interior trim, exterior trim, corrosion protection.
HVAC:
Heating, Ventilation, and Air Conditioning (HVAC) system, refrigerant type and charge, compressor, condenser, evaporator, cabin air filter, climate control unit.
Electrical Chassis:
Lighting systems (headlights, taillights, interior), power windows, power locks, mirrors, wipers, horn, battery, fuses, relays, wiring diagrams.
Safety Systems:
Airbag system (SRS), seat belts, seat belt pretensioners, occupant sensors, impact sensors.
Infotainment:
Audio system, navigation system (if equipped), display unit, speakers, antenna.
Maintenance Procedures:
Scheduled maintenance, oil and filter changes, fluid checks and top-offs, filter replacements (air, cabin, fuel), spark plug replacement, brake fluid flush, coolant flush, transmission fluid change.
Diagnostic Procedures:
Troubleshooting charts, symptom-based diagnostics, fault code (DTC) interpretation and clearing, electrical system diagnosis, component testing.
Repair Procedures:
Component removal and installation, engine overhaul, transmission overhaul, brake system repair, suspension component replacement, body panel repair, electrical component repair.
Adjustment Procedures:
Valve lash adjustment, throttle body synchronization, headlight aim adjustment, parking brake adjustment.
Wiring Diagrams:
Detailed electrical circuit diagrams for all vehicle systems, including power distribution, grounds, and signal paths.
Specifications And Tolerances:
Torque specifications for all fasteners, clearances, fluid capacities, wear limits, pressure specifications.
Depth Of Coverage:
Comprehensive, covering everything from basic scheduled maintenance to in-depth engine and transmission rebuilds, electrical diagnostics, and bodywork.
Engine Code 1:
4B10 (2.0L MIVEC)
Configuration 1:
Inline 4-cylinder, DOHC, 16-valve, MIVEC (Mitsubishi Innovative Valve timing Electronic Control)
Horsepower 1:
Approx. 150-160 PS (110-118 kW) @ 6000 rpm (varies by market)
Torque 1:
Approx. 198-203 Nm (146-150 lb-ft) @ 4200 rpm (varies by market)
Engine Code 2:
4B11 (2.4L MIVEC - often found in higher trims or specific markets)
Configuration 2:
Inline 4-cylinder, DOHC, 16-valve, MIVEC
Horsepower 2:
Approx. 170-175 PS (125-129 kW) @ 6000 rpm (varies by market)
Torque 2:
Approx. 230-235 Nm (170-173 lb-ft) @ 4100 rpm (varies by market)
Fuel Delivery:
Electronic Fuel Injection (MPI - Multi-Point Injection)
Fuel Type:
Unleaded gasoline
Emission Controls:
Catalytic converter, O2 sensors, EGR (Exhaust Gas Recirculation) system.
Transmission Type Standard:
5-speed manual transmission (for most base models)
Transmission Type Optional 1:
6-speed manual transmission (e.g., on Ralliart or certain sport trims)
Transmission Type Optional 2:
CVT (Continuously Variable Transmission) - INVECS-III
Transmission Type Optional 3:
6-speed automatic transmission (with paddle shifters on some models)
Transmission Fluid Manual:
Refer to manual for specific gear oil type (e.g., API GL-4, SAE 75W-85 or similar)
Transmission Fluid Automatic Cvt:
Mitsubishi DiaQueen ATF J2 or equivalent (specific to CVT models)
Transmission Fluid Automatic:
Refer to manual for specific ATF type (e.g., DiaQueen ATF J3 or equivalent)
Oil Change Interval:
Typically 5,000 miles (8,000 km) or 6 months, whichever comes first (refer to manual for specific severe/normal conditions).
Air Filter Replacement:
Every 30,000 miles (48,000 km) or as needed based on driving conditions.
Cabin Filter Replacement:
Every 15,000 miles (24,000 km) or annually.
Spark Plug Replacement:
Typically every 60,000 - 100,000 miles (96,000 - 160,000 km) depending on spark plug type (Iridium recommended).
Transmission Fluid Change Manual:
Refer to manual; often considered 'lifetime' but recommended every 60,000 miles (96,000 km) for longevity.
Transmission Fluid Change Auto Cvt:
Typically every 30,000 - 60,000 miles (48,000 - 96,000 km) depending on usage.
Coolant Replacement:
Initial change around 100,000 miles (160,000 km), then every 50,000 miles (80,000 km).
Engine Oil Type:
SAE 0W-20 or 5W-30 API SN/SP or ILSAC GF-5/GF-6
Engine Oil Capacity:
Approx. 4.0-4.5 liters (4.2-4.8 US quarts) with filter change for 2.0L engine
Coolant Type:
Mitsubishi Super Long Life Coolant (or equivalent green ethylene glycol-based coolant)
Brake Fluid Type:
SAE J1703 or FMVSS No. 116 DOT 3
Cv Boots:
Premature wear or tearing of front CV joint boots leading to noise and failure.
Fuel Pump Relay:
Failure of the fuel pump relay can cause intermittent starting issues or stalling.
Evaporator Core:
Corrosion and failure of the HVAC evaporator core, leading to refrigerant leaks and poor AC performance.
Transmission Issues Cvt:
Some CVT models may experience hesitation or rough shifting; regular fluid maintenance is crucial.
Brake Rotors:
Front brake rotors can be prone to warping, leading to pulsation when braking.