Atv Segment:
Mid-size utility ATV, suitable for recreational riding and light work
Target Audience:
ATV owners, DIY mechanics, service shops
Key Competitors 2013:
Polaris Sportsman 400, Can-Am Outlander 400, Yamaha Grizzly 400 (if applicable, though displacement varies)
Vehicle Features:
TRV designation typically indicates a 2-up riding capability with a passenger seat/backrest, often featuring independent rear suspension (IRS)
Manual Value Proposition:
Essential resource for maintaining, diagnosing, and repairing the 2013 Arctic Cat 400 TRV, ensuring optimal performance and longevity
General Information:
Vehicle identification, safety precautions, general procedures, specifications
Periodic Maintenance:
Scheduled maintenance, lubrication, inspections, adjustments, fluid changes
Steering Frame Controls:
Handlebars, steering column, tie rods, bushings, chassis frame, control levers, cables
Engine Transmission:
Engine assembly, disassembly, internal components, cylinder head, piston, crankshaft, camshaft, timing, clutches, gearbox, drive shafts
Fuel Lubrication Cooling:
Fuel tank, fuel pump, fuel filter, carburetor/fuel injection system, oil pump, oil passages, cooling system, radiator, fan, coolant
Electrical System:
Battery, charging system, ignition system, lighting, starter motor, wiring diagrams, sensors, ECU
Drivetrain Suspension:
Axles, CV joints, differentials, suspension arms, shock absorbers, springs, wheel hubs, bearings
Brakes:
Brake system, master cylinder, calipers, brake pads, brake lines, bleeding procedures
Bodywork Plastics:
Body panels, fenders, racks, seat, storage compartments, fairings
Troubleshooting:
Diagnostic procedures, symptom-based troubleshooting charts, error codes
Maintenance Procedures:
Oil changes, filter replacements, spark plug service, air filter cleaning, chain adjustments, lubrication points
Repair Procedures:
Engine overhaul, transmission rebuild, suspension component replacement, brake caliper service, electrical component repair
Diagnostic Procedures:
Component testing, circuit diagnosis, fuel system checks, ignition timing verification
Special Tool Requirements:
Lists and illustrations of specialized tools needed for specific repairs
Depth Of Information:
Comprehensive: Covers everything from basic maintenance to complete engine and transmission rebuilds
Diagnostic Capability:
Advanced diagnostic procedures and troubleshooting flowcharts
Torque Specifications:
Detailed torque values for all fasteners and critical components
Clearances Tolerances:
Precise specifications for engine clearances, bearing tolerances, and other critical measurements
Engine Type:
4-stroke, Liquid-Cooled, SOHC (Single Overhead Camshaft)
Engine Displacement:
Approximately 360-400cc (Exact specification for 400 TRV needs confirmation but this is the typical range)
Engine Bore X Stroke:
To be detailed in the manual
Horsepower:
To be detailed in the manual (typically in the 25-30 HP range for this class)
Torque:
To be detailed in the manual
Fuel Delivery:
Likely Electronic Fuel Injection (EFI) or Carburetor (check manual for specific variant)
Fuel Type:
Unleaded Gasoline
Oil Type:
To be specified in the manual (likely SAE 10W-40 or 20W-50 ATV-specific oil)
Oil Capacity:
To be specified in the manual
Cooling System:
Liquid-cooled
Coolant Type:
To be specified in the manual (likely a 50/50 ethylene glycol antifreeze mixture)
Transmission Type:
CVT (Continuously Variable Transmission) with engine braking
Drive Modes:
2WD/4WD selector with automatic front differential lock (likely)
Gear Selection:
High, Low, Neutral, Reverse
Transmission Fluid Type:
To be specified in the manual (likely a specific CVT fluid or gear oil)
Transmission Fluid Capacity:
To be specified in the manual
Length:
To be detailed in the manual (typically around 80-85 inches)
Width:
To be detailed in the manual (typically around 46-48 inches)
Height:
To be detailed in the manual (typically around 47-50 inches)
Dry Weight:
To be detailed in the manual (typically around 600-650 lbs)
Towing Capacity:
To be detailed in the manual (typically 500-1000 lbs)
Rack Capacity Front:
To be detailed in the manual (typically 100-150 lbs)
Rack Capacity Rear:
To be detailed in the manual (typically 200-300 lbs)
Oil Change Interval:
Typically every 100 hours or annually, whichever comes first (confirm in manual)
Air Filter Service:
Check every 20 hours, clean/replace as needed (confirm in manual)
Spark Plug Service:
Inspect every 100 hours, replace as needed (confirm in manual)
Belt Inspection:
Inspect CVT belt for wear and damage every 50 hours or annually (confirm in manual)
Engine Oil Grade:
Refer to manual for exact viscosity grade (e.g., SAE 10W-40, SAE 20W-50)
Brake Fluid Type:
DOT 3 or DOT 4 (confirm in manual)
Coolant Type:
Ethylene glycol-based antifreeze (50/50 mix) - confirm in manual
Common Atv Wear Items:
CVT belt wear, suspension bushings, tie rod ends, wheel bearings, brake pad wear
Potential Engine Issues:
Carbon buildup, valve adjustments (as per manual service schedule)
Electrical Component Care:
Importance of clean battery terminals, proper grounding, and protection of electrical connectors from moisture