Engine Mechanical:
Complete disassembly, inspection, and reassembly of engine components, including cylinder head, block, pistons, crankshaft, camshafts, timing systems, lubrication, and cooling.
Fuel System:
Fuel injection system, fuel pump, injectors, fuel pressure regulator, evaporative emission control (EVAP).
Ignition System:
Ignition coils, spark plugs, wiring, ignition timing.
Exhaust System:
Exhaust manifold, catalytic converter, muffler, oxygen sensors.
Transmission Manual:
Clutch system, gearbox overhaul, gear selection mechanism, synchronizers, bearings, seals.
Transmission Automatic:
If applicable, torque converter, planetary gear sets, hydraulic control systems, valve body.
Drivetrain:
Axles, CV joints, differential, driveshafts.
Suspension:
Front and rear suspension components, shock absorbers, springs, control arms, bushings, alignment specifications.
Steering:
Steering column, steering rack, power steering system (if equipped), tie rods, steering linkage.
Brakes:
Front and rear brake systems (disc and drum), brake calipers, rotors, pads, shoes, master cylinder, brake lines, parking brake.
Electrical System Overview:
Wiring diagrams, component locations, fuses, relays, power distribution.
Battery And Charging:
Battery specifications, charging system (alternator, regulator).
Starting System:
Starter motor, starter solenoid.
Lighting System:
Headlights, taillights, interior lighting, turn signals, wiring.
Instrument Panel And Gauges:
Speedometer, tachometer, fuel gauge, temperature gauge, warning lights.
Comfort And Convenience:
HVAC system (heating, ventilation, air conditioning), power windows, power locks, mirrors, wipers, horn.
Body And Frame:
Body panel removal and installation, chassis specifications, structural components.
Interior Trim:
Dashboard, seats, door panels, headliner.
Exterior Trim:
Bumpers, grilles, trim pieces, emblems.
Diagnostic Troubleshooting:
Systematic approaches to diagnosing common faults and malfunctions.
Routine Maintenance:
Oil changes, filter replacements, spark plug replacement, coolant flushes, brake fluid changes, tire rotation.
Component Replacement:
Step-by-step instructions for replacing major components like alternators, starters, water pumps, fuel pumps, brake pads, etc.
Major Repairs:
Engine rebuild procedures, transmission overhaul, suspension component replacement, steering system repair.
Troubleshooting Guides:
Diagnostic flowcharts and symptom-based troubleshooting for various systems.
Tightening Torques:
Specific torque values for critical fasteners across all systems.
Wiring Diagrams:
Detailed electrical schematics for various circuits and systems.
Special Tool Recommendations:
Identification of necessary specialized tools for specific repair procedures.
Pre Delivery Inspection:
Checklists and procedures for initial vehicle inspection.
Depth Of Coverage:
Comprehensive, covering detailed disassembly and reassembly for most major components. Suitable for both DIY enthusiasts and professional mechanics.
Engine Oil Change:
Every 5,000 km or 6 months, whichever comes first (check manual for specific viscosity and API rating).
Air Filter Replacement:
Every 20,000 km or 12 months.
Spark Plug Replacement:
Every 40,000 km.
Coolant Flush:
Every 40,000 km or 24 months.
Brake Fluid Change:
Every 24 months.
Engine Oil Type:
API SG or higher, SAE 10W-30 or 10W-40 (depending on ambient temperature). Capacity typically 3.5 - 4.0 liters.
Coolant Type:
Ethylene glycol-based antifreeze, mixed 50/50 with distilled water. Capacity typically 4.5 - 5.0 liters.
Brake Fluid Type:
DOT 3 or DOT 4.
Transmission Fluid Type:
Manual: API GL-4 SAE 75W-90. Automatic (if equipped): DEXRON III or equivalent. Capacity varies.
Common Issues:
Electrical gremlins, minor interior trim fitment issues, premature wear of suspension bushings, potential clutch wear due to urban use, occasional cooling system leaks (hose clamps, radiator).
