Engine Mechanical:
Complete engine overhaul, diagnosis, repair, timing, seals, gaskets, pistons, crankshaft, camshafts, valves
Engine Electrical:
Ignition system, starting and charging systems, wiring diagrams, sensor diagnosis, ECU testing, component testing
Emission Control:
Evaporative emission control (EVAP), catalytic converter, oxygen sensors, EGR system, emission testing and diagnosis
Fuel System:
Fuel pump, fuel injectors, fuel filter, fuel lines, fuel tank, pressure testing, diagnosis and repair
Clutch System:
Clutch inspection, replacement, hydraulic system, clutch pedal adjustments
Manual Transaxle:
Internal components, gear sets, synchronizers, bearings, seals, fluid changes, repair and overhaul
Automatic Transaxle:
Internal components, torque converter, valve body, solenoids, transmission control module (TCM), fluid changes, diagnosis, repair, and overhaul
Driveshaft Axle:
CV joints, drive axles, universal joints, differential service, wheel bearings
Suspension System:
Struts, shocks, control arms, ball joints, sway bars, bushings, alignment specifications
Steering System:
Power steering pump, steering rack, tie rod ends, steering column, hydraulic system, electric power steering (EPS) components
Restraint System:
Airbag system diagnosis and repair, seat belts, SRS module
Brake System:
Brake pads, rotors, calipers, brake lines, master cylinder, ABS system, parking brake, fluid specifications and bleeding procedures
Body Interior Exterior:
Door panels, trim, seats, headliner, exterior panels, bumpers, glass replacement, weatherstripping
Body Electrical:
Lighting systems, power windows, door locks, mirrors, wipers, horns, interior electronics, fuse box locations, wiring diagrams
HVAC:
Air conditioning system, heater core, blower motor, climate control panel, refrigerant handling, diagnosis and repair
Maintenance Tasks:
Oil and filter changes, air filter replacement, cabin air filter replacement, fluid checks and top-offs, spark plug replacement, tire rotation
Diagnostic Procedures:
Troubleshooting guides, diagnostic trouble codes (DTCs), symptom-based diagnostics, component testing
Repair Procedures:
Step-by-step instructions for all major component repairs and replacements, including engine and transmission rebuilds
Special Tools:
Identification and usage of specialized tools required for specific repairs
Depth:
Comprehensive: Covers everything from basic maintenance and routine service to advanced diagnostics, component overhaul, and complete vehicle repair. Suitable for professional technicians and advanced DIY enthusiasts.
Equinox Engine Options:
2.4L Ecotec I4 (LAF) and 3.0L V6 (LF1)
Terrain Engine Options:
2.4L Ecotec I4 (LAF) and 3.0L V6 (LF1)
2.4L Ecotec I4 (Laf) Horsepower:
Approximately 182 hp @ 6700 rpm
2.4L Ecotec I4 (Laf) Torque:
Approximately 172 lb-ft @ 4900 rpm
3.0L V6 (Lf1) Horsepower:
Approximately 264 hp @ 6950 rpm
3.0L V6 (Lf1) Torque:
Approximately 220 lb-ft @ 5100 rpm
Injection Type:
Multi-port Fuel Injection (MPFI)
Fuel Type:
Regular Unleaded Gasoline
Equinox Standard Transmission:
6-speed automatic transmission (6T45)
Terrain Standard Transmission:
6-speed automatic transmission (6T45)
Equinox Optional Transmission:
None offered from factory for these model years
Terrain Optional Transmission:
None offered from factory for these model years
Automatic Transmission Features:
Driver Shift Control (DSC), electronically controlled with overdrive and manual mode
NHTSA Overall Rating Equinox 2010:
5-Star (Frontal Driver, Frontal Passenger, Side Driver, Side Rear Passenger); 4-Star (Rollover)
IIHS Rating Equinox 2010:
Good (Frontal Offset, Side Impact, Roof Strength)
ABS:
Standard Anti-lock Braking System
Traction Control:
Standard Traction Control System (TCS)
Stability Control:
Standard StabiliTrak (Electronic Stability Control)
Airbags:
Standard front airbags, side-impact airbags, and curtain airbags
Seat Belts:
3-point seat belts with pretensioners and load limiters
Oil Change Interval:
Every 7,500 miles (12,000 km) or 12 months, whichever comes first (under normal driving conditions). Refer to manual for severe driving conditions.
Tire Rotation Interval:
Every 7,500 miles (12,000 km)
Transmission Fluid Change:
Inspect every 45,000 miles (72,000 km), replace as needed or per specific driving conditions. Consult manual for detailed recommendations.
Engine Oil Type:
SAE 5W-30 Synthetic Motor Oil (API SN or higher)
Engine Oil Capacity 2.4L:
5.0 US quarts (4.7 L) with filter change
Engine Oil Capacity 3.0L V6:
6.5 US quarts (6.2 L) with filter change
Transmission Fluid Type:
Dexron VI Automatic Transmission Fluid
Coolant Type:
GM Super Coolant (GMC Blue) - Extended Life
Timing Chain Rattle 2.4L:
Some 2.4L Ecotec engines may experience timing chain noise due to tensioner or guide wear. Manual provides diagnosis and repair procedures.
Transmission Slipping 6T45:
Potential for transmission slipping or harsh shifting; manual covers diagnostic procedures and solenoid testing.
Water Pump Leaks:
Occasional reports of water pump leaks on the V6 engines. Manual details replacement procedure.
Chevrolet Heritage:
Chevrolet, a division of General Motors, has a long history of producing popular and reliable vehicles, including SUVs and crossovers.
Gmc Heritage:
GMC, also a division of General Motors, focuses on trucks and SUVs, known for their ruggedness and capability.
Equinox Generation:
Second generation (2010-2017), introduced a significant redesign with new styling and powertrains.
Terrain Generation:
First generation (2010-2017), introduced as a distinct model from the Equinox, sharing many mechanical components but with unique styling and positioning.
Manufacturing Locations:
CAMI Automotive in Ingersoll, Ontario, Canada; Chevrolet Assembly in St. Catharines, Ontario, Canada
