Engine Mechanical:
Detailed procedures for engine overhaul, component replacement, timing, and diagnostics.
Engine Electrical:
Ignition system, charging system, starting system, sensors, actuators, ECM diagnostics.
Emission Control:
Catalytic converter, EGR system, evaporative emission system, diagnostic procedures.
Fuel System:
Fuel injection, fuel pump, fuel filter, fuel pressure testing, injector diagnostics.
Clutch System:
Clutch disc, pressure plate, release bearing, hydraulic system (for manual transmission applications).
Manual Transaxle:
Gearbox overhaul, component replacement, lubrication, clutch interlock system.
Automatic Transaxle:
Torque converter, valve body, internal components, fluid service, transmission control module (TCM) diagnostics.
Driveshaft And Axle:
CV joints, universal joints, driveshaft balancing, axle shaft replacement, differential service.
Suspension System:
Front and rear suspension components, shock absorbers, struts, control arms, alignment procedures.
Steering System:
Power steering pump, steering rack/gearbox, tie rods, steering column, alignment.
Restraint System:
Airbag system (SRS) components, seatbelts, diagnostic trouble codes (DTCs) related to airbags.
Brake System:
Brake calipers, rotors, pads, master cylinder, ABS system, bleeding procedures.
Body Interior Exterior:
Door panels, trim removal, body panel repair, glass replacement, weatherstripping.
Body Electrical System:
Lighting, power windows, power locks, mirrors, wipers, horns, body control module (BCM) functions.
HVAC System:
Air conditioning compressor, refrigerant, heater core, blower motor, climate control module.
Diagnostics:
Step-by-step diagnostic procedures for all major systems, including use of scan tools and interpretation of DTCs.
Repair:
Detailed repair instructions for component replacement, disassembly, and reassembly.
Maintenance:
Scheduled maintenance, fluid changes, filter replacements, lubrication.
Troubleshooting:
Symptom-based troubleshooting guides for common and uncommon issues.
Wiring Schematics:
Complete wiring diagrams for all electrical systems, aiding in diagnosis and repair.
Depth:
Comprehensive, covering basic to advanced repairs, suitable for professional mechanics and knowledgeable DIYers.
Engine Options 2005:
2.7L V6 (2.7 EER), 3.5L V6 (3.5L V6), 5.7L V8 HEMI (5.7L V8 HEMI)
Horsepower Torque 2.7L V6:
190 hp @ 5600 rpm / 200 lb-ft @ 4000 rpm (estimated, actual may vary by specific model tune)
Horsepower Torque 3.5L V6:
250 hp @ 6400 rpm / 250 lb-ft @ 4000 rpm (estimated, actual may vary by specific model tune)
Horsepower Torque 5.7L V8 Hemi:
340 hp @ 5000 rpm / 390 lb-ft @ 4000 rpm (estimated, actual may vary by specific model tune)
Fuel Delivery:
Multi-port Fuel Injection (MPI)
Recommended Fuel:
87 Octane (for 2.7L and 3.5L), 91 Octane (recommended for 5.7L HEMI for optimal performance)
Transmission 2005 Models:
4-Speed Automatic (42RLE) standard on most models, 5-Speed Automatic (W5A580) optional or standard on higher trims (300C), Manual Transaxle (NV3500) available on select 2.7L RWD models.
Optional Transmission Variants:
5-Speed Automatic transmission on V8 models and higher trim V6.
Automatic Transmission Features:
Electronic control, driver-selectable modes (e.g., AutoStick for manual gear selection).
NHTSA Front Impact Rating:
5-Star (for driver and passenger, 2005 model year)
IIHS Front Offset Rating:
Good (2005 model year)
Available Driver Assistance:
Traction Control (TCS), Electronic Stability Program (ESP), Anti-lock Braking System (ABS), Electronic Brake Force Distribution (EBD), Brake Assist (BAS).
Standard Passive Safety:
Front airbags, front side-impact airbags, available full-length side-curtain airbags.
Oil Change Interval:
Typically every 7,500 miles (12,000 km) or 6 months, with synthetic oil. Consult manual for exact interval based on driving conditions.
Engine Air Filter:
Inspect every 15,000 miles (24,000 km), replace as needed or every 30,000 miles (48,000 km).
Spark Plug Replacement:
2.7L V6 and 3.5L V6: Typically around 100,000 miles. 5.7L HEMI: Often iridium plugs with intervals around 100,000 miles as well. Consult manual for specific plug type and interval.
Engine Oil Spec:
SAE 5W-20 or SAE 5W-30 (synthetic recommended, check manual for specific engine requirements).
Transmission Fluid Spec:
ATF+4 (Automatic Transmission Fluid) for 42RLE and W5A580 transmissions.
Coolant Spec:
Mopar Antifreeze/Coolant (5-Year/100,000 Mile Formula) or equivalent HOAT coolant.
Common Wear Items:
Suspension components (ball joints, control arm bushings), alternator, power steering pump, door lock actuators, HVAC blend door actuators.
Powertrain Considerations:
5.7L HEMI can be prone to valve spring issues ('HEMI tick') if not properly maintained, though less common in early models. Automatic transmissions generally reliable but require timely fluid changes.
Chrysler Legacy:
Chrysler has a long history of producing large, comfortable, and powerful sedans, often associated with luxury and performance.
Lx Platform Debut:
The Chrysler 300 (and its performance variant, the 300C) debuted for the 2005 model year, marking a significant return to a rear-wheel-drive platform and a distinctive, American-inspired design language, built on the LX platform shared with Dodge Charger and Magnum.
Manufacturing Location:
Brampton Assembly, Ontario, Canada
