Manual Coverage
|
Systems Covered
|
Engine Mechanical:
|
Complete disassembly and assembly procedures
|
Engine Management:
|
Fuel injection, ignition system diagnostics
|
Transmission:
|
Service and repair for automatic transmission
|
Drivetrain:
|
Front-wheel drive axle and differential service
|
Suspension:
|
Front and rear suspension component replacement and alignment
|
Steering:
|
Power steering system service and repair
|
Brakes:
|
Disc brake system overhaul, ABS diagnostics
|
Electrical:
|
Detailed wiring diagrams, component testing, troubleshooting
|
HVAC:
|
Air conditioning and heating system service
|
Body:
|
Body panel removal, interior trim, exterior components
|
Diagnostics:
|
Troubleshooting common issues and fault codes
|
Procedures Included
|
Maintenance:
|
Scheduled maintenance tasks, fluid changes, filter replacements
|
Repair:
|
Step-by-step repair instructions for all major components
|
Troubleshooting:
|
Guidance for diagnosing and resolving various vehicle problems
|
Component Rebuild:
|
Detailed instructions for rebuilding engines, transmissions, and other major units
|
Electrical Diagnostics:
|
Specific procedures for testing electrical circuits and components
|
Technical Depth
|
Depth:
|
Comprehensive, covering complete disassembly to advanced diagnostics
|
Illustrations:
|
Hundreds of photos and illustrations
|
Detail Level:
|
Detailed substeps expand on repair procedure information
|
Critical Information:
|
Notes, cautions, and warnings pinpoint critical information
|
Instruction Format:
|
Numbered instructions for step-by-step guidance
|
Illustration Matching:
|
Bold figure numbers help match illustrations with instructions
|
Part Identification:
|
Enlarged insets for detailed examination of parts
|
Navigation:
|
Numbered table of contents for fast information retrieval
|
Engine Specifications
|
Primary Engine
|
Engine Code:
|
3.8L V6 (EGH)
|
Displacement:
|
3.8 Liters (231 cubic inches)
|
Configuration:
|
Overhead Valve (OHV), 90-degree V6
|
Bore X Stroke:
|
3.56 in x 3.80 in (90.5 mm x 96.5 mm)
|
Compression Ratio:
|
8.5:1
|
Performance
|
Horsepower:
|
162 hp @ 4400 rpm
|
Torque:
|
221 lb-ft @ 3200 rpm
|
Fuel System
|
Fuel Delivery:
|
Sequential Multi-Port Fuel Injection (MPI)
|
Fuel Type:
|
Unleaded Gasoline (87 octane recommended)
|
Engine Management
|
Ignition System:
|
Distributorless Ignition System (DIS)
|
Cooling System
|
Coolant Capacity:
|
Approx. 12.2 quarts (11.5 liters)
|
Lubrication
|
Oil Capacity:
|
Approx. 4.5 quarts (4.3 liters) with filter change
|
Recommended Oil:
|
SAE 5W-30 API SG or equivalent (refer to manual for specific viscosity based on temperature)
|
Maintenance
|
Service Intervals
|
Oil Change:
|
Every 3,000 - 7,500 miles (5,000 - 12,000 km) or 6 months, depending on driving conditions and oil type (refer to manual for specifics).
|
Air Filter Replacement:
|
Every 12,000 - 15,000 miles (20,000 - 24,000 km) or annually.
|
Spark Plug Replacement:
|
Typically every 30,000 - 60,000 miles (48,000 - 96,000 km), depending on spark plug type.
|
Transmission Fluid Change:
|
Every 30,000 - 60,000 miles (48,000 - 96,000 km) or as recommended in the manual.
|
Fluid Specifications
|
Coolant:
|
50/50 mix of Mopar Antifreeze/Coolant (MS-7170 or equivalent) and distilled water.
|
Brake Fluid:
|
DOT 3 brake fluid
|
Power Steering Fluid:
|
Mopar Power Steering Fluid or equivalent (check manual for specific type)
|
Known Issues
|
Engine Wear:
|
Potential for head gasket leaks or intake manifold gasket leaks on some 3.8L V6 engines.
|
Transmission Reliability:
|
While generally robust, the 41TE transmission can experience electronic control issues or solenoid failures if not maintained properly.
|
Electrical Systems:
|
Age-related electrical issues, such as failing sensors, wiring harness degradation, or actuator failures, can occur.
|
HVAC System:
|
Common issues can include leaks in the A/C system, failing blower motors, or control module malfunctions.
|
Suspension Components:
|
Wear and tear on suspension bushings, ball joints, and tie rod ends due to age and mileage.
|