Engine Mechanical:
Detailed component removal, inspection, repair, and reassembly for cylinder head, block, pistons, crankshaft, camshafts, timing system.
Engine Management:
ECU operation, sensor identification and testing (MAP, TPS, O2, CKP, CMP), actuator control (injectors, ignition coils), diagnostic trouble codes (DTCs) and their meanings.
Fuel And Emissions:
Fuel pump operation, fuel injectors, pressure regulator, evaporative emission control (EVAP), catalytic converter function, fuel filter replacement.
Cooling And Lubrication:
Radiator, water pump, thermostat, coolant types and capacities, oil pump, oil filter, oil pressure specifications, lubrication points.
Ignition System:
Spark plugs, ignition coils, distributor (if applicable), ignition timing, ignition control module troubleshooting.
Automatic Transmission:
Torque converter, gear sets, clutch packs, valve body operation, transmission fluid type and capacity, service and overhaul procedures.
Manual Transmission:
Clutch operation, gear engagement, transmission fluid specifications, clutch fluid, service and overhaul procedures.
Brake System:
Front and rear brake component identification (rotors, calipers, pads), hydraulic system layout, bleeding procedures, ABS system operation and diagnosis.
Suspension And Steering:
Front and rear suspension components (struts, shocks, control arms, bushings), steering rack and pinion, power steering system, wheel alignment specifications.
Electrical Diagnostics:
Wiring diagrams for all major systems, fuse box locations and identification, relay functions, battery and charging system testing.
Lighting System:
Headlight, taillight, interior lighting, bulb types and replacement procedures.
HVAC System:
Blower motor, evaporator, condenser, refrigerant charging, cabin air filter replacement, diagnostic procedures for climate control.
Body Exterior:
Door panel removal, bumper replacement, glass replacement, body panel alignment, paint repair guidelines.
Interior Components:
Seat removal, dashboard disassembly, instrument cluster service, headliner replacement.
Routine Maintenance:
Oil changes, filter replacements, fluid level checks and top-offs, tire rotations, spark plug replacement, belt inspection and replacement.
Component Removal And Installation:
Step-by-step instructions for removing and reinstalling all major components, including engine, transmission, brakes, suspension parts, and body panels.
Troubleshooting Guides:
Systematic approach to diagnosing common and uncommon problems, with symptom-based guides and component testing procedures.
Diagnostic Procedures:
Detailed instructions for using diagnostic tools, reading fault codes, and performing live data analysis.
Overhaul And Rebuild:
Complete instructions for rebuilding engines, transmissions, and other major mechanical assemblies, including specifications for machining and clearances.
Electrical Repairs:
Wiring repair techniques, connector servicing, component replacement, and troubleshooting of electrical faults.
Specifications And Tolerances:
Precise torque values for fasteners, engine bearing clearances, piston ring gap, valve lash, and other critical specifications.
Fluid Capacities And Types:
Exact fluid requirements for engine oil, transmission fluid, coolant, brake fluid, power steering fluid, and more.
Wheel Alignment Procedures:
Specifications for camber, caster, and toe angles, along with procedures for adjustment.
Depth:
Comprehensive: Covers everything from basic preventative maintenance to in-depth mechanical and electrical repairs, including complete unit overhauls and advanced diagnostics.
Engine Oil And Filter:
Every 7,500 miles (12,000 km) or 6 months, whichever comes first (refer to manual for exact conditions).
Air Filter:
Inspect every 15,000 miles (24,000 km), replace as needed or every 30,000 miles (48,000 km).
Spark Plugs:
Replace every 60,000 miles (96,000 km) with recommended iridium or platinum plugs.
Transmission Fluid Automatic:
Inspect every 30,000 miles (48,000 km), replace every 60,000 miles (96,000 km) or as per severe service schedule.
Transmission Fluid Manual:
Inspect every 30,000 miles (48,000 km), replace every 75,000 miles (120,000 km).
Coolant:
Flush and replace every 30,000 miles (48,000 km) or 2 years.
Power Steering Fluid:
GM Power Steering Fluid or Dexron III ATF.
Brake Fluid:
DOT 3 or DOT 4 Brake Fluid.
Engine Mounts:
Can degrade over time, leading to vibration.
Ignition Coils:
Can fail, causing misfires and rough running.
Cooling System:
Radiator hoses and water pump can develop leaks.
Exhaust Manifold:
Can develop cracks, leading to exhaust leaks and ticking noises.
Automatic Transmission:
Can exhibit harsh shifting or slipping if fluid is not maintained.