Engine Mechanical:
Complete engine teardown, inspection, and reassembly procedures.
Emission Control:
Diagnosis and repair of emission control systems, including EGR, catalytic converter, and evaporative emission control.
Efi System:
Detailed coverage of the Electronic Fuel Injection system, including sensors, actuators, and ECU diagnostics.
Lubrication System:
Engine oil pump, filter, oil passages, and lubrication intervals.
Cooling System:
Radiator, water pump, thermostat, coolant flow, and pressure testing.
Ignition System:
Spark plugs, ignition coils, timing, and diagnostic procedures for ignition faults.
Starting System:
Starter motor, battery, and related circuitry troubleshooting and repair.
Charging System:
Alternator, voltage regulator, and battery charging system diagnostics.
Clutch:
Clutch assembly, hydraulic system, and adjustment procedures.
Manual Transmission:
Internal components, gear selection, and fluid service for manual gearboxes.
Automatic Transmission:
Internal components, torque converter, hydraulic control, and fluid service for automatic transmissions.
Transmission And Transfer:
Operation and servicing of the transfer case and four-wheel-drive system.
Propeller Shaft:
U-joints, balancing, and driveline component inspection.
Front And Rear Differential:
Internal components, lubrication, and service procedures for differentials.
Front Axle And Suspension:
CV joints, steering knuckles, control arms, springs, shocks, and alignment specifications.
Rear Axle And Suspension:
Axle housing, drive shafts, trailing arms, shocks, springs, and alignment specifications.
Brake System Including ABS:
Disc and drum brake components, hydraulic system, ABS module, and anti-lock brake diagnostics.
Steering System:
Steering rack, power steering pump, tie rods, and steering column components.
Body:
Body panel removal and installation, door mechanisms, glass, and interior trim.
Body Electrical:
Lighting, wipers, power windows, central locking, and body control modules.
Airbag System:
SRS components, deployment sensors, control module, and safety precautions.
Immobilizer System:
Immobilizer unit, key transponder, and anti-theft system diagnostics.
Harness And Wiring Diagrams:
Comprehensive electrical wiring diagrams for all vehicle systems.
General Information:
Vehicle identification, safety precautions, general tools, and torque specifications.
Maintenance:
Scheduled maintenance, fluid changes, filter replacements, and inspection routines.
Troubleshooting:
Step-by-step diagnostic procedures for common and uncommon faults across all systems.
Repair:
Detailed instructions for component removal, repair, and installation.
Adjustment:
Procedures for adjusting various components such as brakes, clutch, and parking brake.
Diagnostic Capability:
Advanced diagnostic information, including fault codes and sensor data interpretation.
Rebuild Procedures:
Detailed instructions for complete engine, transmission, and differential rebuilds.
Schematics:
Detailed wiring diagrams and system schematics for electrical and electronic systems.
Oil Change Interval:
Typically every 5,000 - 7,500 km or 6 months, whichever comes first (refer to manual for precise recommendation).
Transmission Fluid Interval:
Manual: Every 40,000 - 60,000 km. Automatic: Every 30,000 - 50,000 km (or as specified).
Engine Oil Type:
API SG/SH or higher, SAE 10W-30 or 10W-40 (check manual for exact viscosity and API rating).
Coolant Type:
Ethylene glycol-based antifreeze/coolant, typically a 50/50 mix with distilled water.
Brake Fluid:
DOT 3 or DOT 4 brake fluid (refer to manual for specific requirement).
Common Wear Items:
Clutch wear, CV joint boots, exhaust system components, suspension bushings, and ignition coils can be common wear items.
Potential Electrical Issues:
Corrosion in connectors, failing power window motors, and immobilizer system glitches can sometimes occur.
