Engine:
Detailed breakdown of engine components and assembly
Powertrain:
Clutch, transmission, final drives, PTO components
Hydraulics:
Hydraulic pump, valves, cylinders, linkages, and associated parts
Front Axle Steering:
Components of the front axle, steering mechanism, and linkage
Brakes:
Brake system components and assemblies
Electrical System:
Starter, alternator, wiring harness components, lights, and control units
Operator Station:
Controls, seat, platform, and associated hardware
Bodywork Chassis:
Fenders, hood, mounting brackets, and structural components
Hitches Linkages:
Three-point hitch components, drawbar, and auxiliary hydraulic connections
Wheels Tires:
Wheel rims, hubs, and related hardware
Part Identification:
Identification of all replaceable parts with diagrams
Assembly Disassembly:
Guidance through component assembly and disassembly via exploded views
Cross Referencing:
Facilitates finding superseded or alternative part numbers
Depth:
Comprehensive part number listing and visual identification for all tractor assemblies
Make:
Fendt (likely MWM or Deutz-Fahr based, specific model dependent on exact tractor build)
Configuration:
Typically 3-cylinder diesel
Displacement:
Commonly around 2.5 - 3.0 liters (e.g., 2538 cc for some configurations)
Horsepower Range:
Approximately 60-70 HP (net)
Injection Type:
Direct Injection (likely Bosch or similar)
Type:
Synchronized Manual Gearbox (e.g., 24 forward / 8 reverse speeds, often with a creeper gear option)
Features:
Hydraulic shuttle, power take-off (PTO) speed options (540/1000 RPM)
Transmission Oil:
Refer to specific sections for Fendt Gear Oil specification (e.g., SAE 80W-90 GL-4 or equivalent specialized tractor hydraulic fluid)
Length:
Variable based on configuration, typically around 3.7 - 4.0 meters
Width:
Variable based on tire size and track width, approximately 1.6 - 1.9 meters
Height:
Approximately 2.3 - 2.5 meters to the top of the cab
Operating Weight:
Around 3,000 - 3,500 kg (unballasted)
Max Gross Weight:
Subject to load and specific configuration, consult operator's manual for exact limits
Rollover Protection:
ROPS (Roll Over Protective Structure) equipped, often with optional safety belt
Braking:
Hydraulic disc brakes, often with independent or combined operation
Operator Station:
Enclosed cab or open station with ROPS, ergonomic controls placement
Features:
Basic analog instrumentation, work lights, potentially a radio option
Features:
Mechanical PTO engagement, robust hydraulic control levers, parking brake
Features:
Standard PTO, hydraulic remotes, and electrical outlets for implements
Engine Oil Change:
Typically every 250-500 operating hours or annually, consult specific manual for exact interval and oil type
Fuel Filter Replacement:
Recommended at engine oil service intervals or as indicated by performance
Hydraulic Fluid Change:
Typically every 1000-2000 operating hours, check filter condition regularly
Engine Oil:
Refer to manual for Fendt-approved engine oil (e.g., API CI-4 or ACEA E7, viscosity grade typically 10W-40 or 15W-40 depending on ambient temperature)
Coolant:
Ethylene glycol based coolant with anti-corrosion additives, typically a 50/50 mix with distilled water
Hydraulic Oil:
Refer to manual for Fendt Hydraulic Fluid specification (e.g., AGCO Premium Hydraulic Fluid or equivalent meeting ISO VG 46 or 68, depending on application)
Common Wear Items:
Clutch wear, hydraulic seal leaks, PTO bearing wear, starter motor reliability
Electrical Components:
Corrosion on connectors, potential failure of older switches and sensors
