Engine Mechanical:
Engine assembly, disassembly, cylinder head, pistons, crankshaft, camshafts, timing components, lubrication system, cooling system, intake manifold, exhaust manifold.
Engine Management:
Fuel injection system (MPI), ignition system, emission control systems (catalytic converter, EGR), sensors (O2, MAF, TPS), ECM operation and diagnostics, OBD-II troubleshooting.
Transmission Manual:
Manual transmission: disassembly, assembly, clutch system, gear selection, lubrication.
Transmission Automatic:
Automatic transmission: internal components, torque converter, valve body, hydraulic control, transmission fluid, shifting mechanisms, diagnostic procedures.
Drivetrain:
Front-wheel drive (FWD) system, CV joints, drive shafts, differential, wheel bearings, hub assemblies.
Suspension:
Front suspension (MacPherson strut), rear suspension (multi-link), shock absorbers, springs, control arms, stabilizer bars, alignment specifications.
Steering:
Power steering system (hydraulic), steering column, steering rack and pinion, tie rods, steering wheel controls, alignment.
Brakes:
Front disc brakes, rear drum brakes (or disc depending on trim), ABS system, brake fluid specifications, hydraulic lines, master cylinder, caliper/wheel cylinder service, parking brake.
Electrical System:
Battery, charging system (alternator), starting system (starter motor), lighting (headlights, taillights, interior), horn, wipers, power windows, power locks, fuses, relays, wiring diagrams.
Body And Chassis:
Chassis construction, body panels, doors, hood, tailgate, bumpers, interior trim, glass, seals, rust prevention, collision repair basic guidelines.
HVAC:
Heating, ventilation, and air conditioning system: refrigerant type and charge, compressor, condenser, evaporator, blower motor, cabin air filter, diagnosis.
Safety Systems:
Airbag system (SRS), seat belts, pretensioners, SRS control module, diagnostic procedures.
Routine Maintenance:
Oil changes, filter replacements (oil, air, cabin), fluid checks and top-offs, tire rotation, spark plug replacement, battery testing.
Troubleshooting Diagnostics:
System-specific diagnostic charts, fault code interpretation, common problem identification and solutions.
Repair Replacement:
Step-by-step instructions for component removal, installation, and repair across all major vehicle systems.
Component Rebuild:
Detailed procedures for rebuilding major components such as engines, transmissions, and brake calipers.
Electrical Troubleshooting:
Use of wiring diagrams, multimeter testing, tracing electrical faults.
Wheel Alignment:
Specifications for camber, caster, toe, and thrust angle.
Timing Belt Chain Replacement:
Correct procedures for ensuring engine timing integrity during belt/chain replacement.
Depth:
Comprehensive, covering from basic maintenance to in-depth engine and transmission overhauls, including detailed diagnostic procedures.
Length:
Approx. 5135 mm (202.2 in)
Width:
Approx. 1985 mm (78.1 in)
Height:
Approx. 1755 mm (69.1 in)
Wheelbase:
Approx. 3000 mm (118.1 in)
Seating Capacity:
7 or 8 passengers (depending on configuration)
Cargo Volume Behind 3Rd Row:
Approx. 1489 Liters (52.6 cu ft)
Cargo Volume Behind 2Nd Row:
Approx. 2697 Liters (95.2 cu ft)
Cargo Volume Max:
Approx. 4590 Liters (162.1 cu ft) with all rear seats folded/removed.
Curb Weight:
Approx. 1950-2100 kg (4300-4600 lbs), depending on trim and options.
Gross Vehicle Weight Rating:
Approx. 2750 kg (6063 lbs)
Engine Oil Change:
Every 7,500 miles (12,000 km) or 6 months, whichever comes first (under normal driving conditions). Severe driving may require more frequent changes.
Engine Air Filter Replacement:
Every 30,000 miles (48,000 km) or as needed based on inspection.
Cabin Air Filter Replacement:
Every 15,000 miles (24,000 km) or 12 months.
Spark Plug Replacement:
Every 100,000 miles (160,000 km) with platinum-tipped spark plugs.
Transmission Fluid Change:
Every 60,000 miles (96,000 km) or as recommended by severe service schedule.
Coolant Replacement:
Initial replacement at 60,000 miles (96,000 km), then every 30,000 miles (48,000 km) or 24 months thereafter.
Engine Oil Type:
API SN or higher, ILSAC GF-5 or higher, SAE 5W-20
Engine Oil Capacity:
Approx. 5.0 Liters (5.3 US Quarts) with filter change.
Power Steering Fluid Type:
ATF SP-III or equivalent
Engine Mounts:
Premature wear and failure of engine mounts, leading to excessive vibration.
Transmission Shift Issues:
Occasional reports of rough shifting or transmission slipping, potentially related to fluid condition or valve body issues.
Cv Axle Wear:
Front CV joint boots can tear, leading to joint failure if not addressed promptly.
HVAC Blower Motor:
Blower motor resistor failure, causing fan speed issues.
Power Sliding Doors:
Issues with the motor or mechanism for power sliding doors can occur.