Target Audience:
Land Rover Defender 300 Tdi owners, mechanics, enthusiasts
Manual Advantage:
Official dealer workshop standard, comprehensive coverage
Ease Of Use:
Simple to use, packed with essential information
Scope Completeness:
Covers every part of the vehicle, from basic maintenance to complex repairs
Engine Systems:
Engine tuning, lubrication, cooling, fuel, emission control, engine management, manifold & exhaust
Drivetrain Systems:
Clutch, manual gearbox, transfer gearbox, propeller shafts
Chassis And Suspension:
Steering, front suspension, rear suspension, brakes, chassis and body
Electrical And Accessories:
Electrical systems, instruments, air conditioning, wipers and washers
Bodywork And Chassis:
Chassis and body, panel repairs, structural integrity
Air Conditioning System:
Air conditioning system diagnosis and repair
Maintenance Procedures:
Scheduled maintenance, fluid changes, filter replacements, tune-ups
Diagnostic Procedures:
Troubleshooting, fault diagnosis, emission control system diagnosis
Repair Procedures:
Engine overhaul, transmission repair, brake caliper replacement, suspension component replacement, body panel repair
Component Installation:
Component removal and installation, electrical wiring diagrams, torque specifications
Electrical Diagrams:
Comprehensive wiring diagrams for all electrical systems
Diagnostic Depth:
Advanced diagnostics including engine management system troubleshooting
Rebuild Depth:
Complete engine and transmission rebuild procedures
Specification Detail:
Detailed torque settings, fluid capacities, engine tuning data
General Spec Data:
General specification data for all components
Fitting Reminders:
General fitting reminders and best practices
Engine Type:
Inline 4-cylinder Turbocharged Diesel
Engine Displacement:
2.5 Liters (2495 cc)
Horsepower:
113 hp @ 4000 rpm (approximate, check specific vehicle)
Torque:
265 Nm (195 lb-ft) @ 1800 rpm (approximate, check specific vehicle)
Fuel Injection:
Direct Injection with Bosch VE Rotary Pump
Tuning Data:
Specific engine tuning data and parameters
Wheelbase:
Approx. 90 inches (2286 mm) for SWB, 108 inches (2743 mm) for LWB
Ground Clearance:
Approx. 8.5 inches (215 mm)
Curb Weight:
Varies by body style, approx. 3600-4200 lbs (1630-1900 kg)
Towing Capacity:
Up to 7700 lbs (3500 kg), check specific regulations
Infotainment System:
Basic radio/cassette or CD player, often aftermarket upgrades
Driver Assistance Features:
Limited; primary focus on mechanical systems and driver control
Connectivity Options:
N/A for factory original 2001 model
Oil Change Interval:
Typically every 6,000-8,000 miles (10,000-12,000 km) or annually, refer to manual for exact specification
Timing Belt Replacement:
Check manual; many 300 Tdi models use timing *chains* or, if a belt, intervals are critical. Manual will specify.
Engine Oil Specification:
API CD/CE/CF or ACEA B2/E2, SAE 15W-40 or 10W-40 (check manual for climate/specifics)
Coolant Specification:
Ethylene Glycol based antifreeze, typically 50% mix with distilled water
Gearbox Oil Specification:
API GL-4 or GL-5, SAE 75W-90 or 80W-90 (check manual for specific gearboxes: LT77, R380, LT230 transfer case)
Common Issues:
Oil leaks (especially from crank seals, injector seals), injector pump timing, clutch wear, rust (chassis and body), turbocharger wear, glow plug reliability
Preventative Maintenance:
Regular checks of oil and coolant, timely replacement of filters and belts, underbody rust proofing
Land Rover Legacy:
Renowned for off-road capability and durability since 1948
Defender Lineage:
Continuation of the original Land Rover Series design principles
Production Years 300Tdi:
1994-1998 (Europe/Global), specific 2001 mention suggests a very late production or re-registered model, or an error in product title referencing a model year much later than the 300Tdi engine's primary run. The manual likely covers the 300 Tdi engine regardless of the specific '2001' designation, which is unusual for this engine.
Manufacturing Locations:
Solihull, UK
