Model:
8600 Series Tractor
Series Designation:
MF8600
Covered Models:
MF 8650, MF 8660, MF 8670, MF 8680, MF 8690
Generation Description:
This generation of Massey Ferguson tractors is characterized by advanced technology, including SCR emissions control systems and powerful engines.
Market Segment:
High-horsepower agricultural tractors, designed for demanding farm operations and large-scale agriculture.
Key Competitors:
John Deere 8R Series, New Holland T8 Series, Case IH Magnum Series, Claas Axion Series.
Engine Technology:
Advanced 8.4L Tier 4/Stage IV compliant engines with SCR (Selective Catalytic Reduction) for emissions control.
Transmission Options:
Likely equipped with advanced transmissions such as a continuously variable transmission (CVT) or power shift options.
Operator Comfort:
Focus on operator comfort and productivity through advanced cab design, suspension systems, and ergonomic controls.
Hydraulic Capacity:
High-capacity hydraulic systems to support demanding implement operations.
Coverage Scope:
Comprehensive workshop service and repair procedures for the entire Massey Ferguson 8600 Series tractor and its component parts and systems.
Estimated Page Count:
Likely exceeds 1000 pages, typical for a full workshop manual of this complexity.
Manual Type:
Workshop Service Repair Manual
Language:
English (Assumed, standard for OEM workshop manuals unless otherwise specified)
Engine System:
Detailed diagnostics, repair, overhaul, and adjustment procedures for the 8.4-litre 6-cylinder turbo/intercooled Gen 2 SCR engines.
Transmission System:
Coverage for gearbox maintenance, repair, and diagnostics.
Rear Axle System:
Procedures for rear axle servicing, differential, and final drive maintenance.
Power Take Off Pto System:
Maintenance and repair of the PTO system.
Front Axle System:
Service and repair of the front axle, including steering and drive components.
Hydraulic System:
Comprehensive coverage of hydraulic pump, valves, cylinders, and associated systems, including calibration and troubleshooting.
Electrical System:
Wiring diagrams, component testing, diagnostic procedures, and repair for the tractor's electrical systems.
Electronics System:
Diagnostics and repair of electronic control units (ECUs), sensors, and related electronic components, including SCR system.
Cab System:
Procedures for cab climate control, operator comfort systems, and interior components.
Maintenance Procedures:
Routine service, lubrication, filter changes, fluid level checks, and preventative maintenance.
Adjustment Procedures:
Specific adjustment procedures for engine, transmission, hydraulics, and other critical systems.
Troubleshooting Guides:
Systematic troubleshooting charts and diagnostic flowcharts for common and uncommon issues.
Repair Procedures:
Step-by-step repair instructions for all major component overhauls and replacements.
Overhaul Procedures:
Detailed instructions for complete engine, transmission, and hydraulic system overhauls.
Diagnostic Codes:
Information on diagnostic trouble codes (DTCs) and their interpretations for electronic systems.
Depth Of Coverage:
Comprehensive, covering from basic daily checks to complete engine and transmission rebuilds. Suitable for professional technicians.
PDF Quality:
High-resolution, likely with searchable text for efficient navigation.
Printability:
Designed to be printable, allowing users to create hard copies for workshop use.
Binding Type:
Not applicable for PDF download; intended for digital use or personal printing.
Paper Type:
Not applicable for PDF download; digital format.
Engine Type:
6-cylinder Turbocharged and Intercooled Diesel Engine with SCR
Engine Displacement:
8.4 Litre
Emissions Standard:
Gen 2, SCR (Selective Catalytic Reduction) - indicative of Tier 4 interim or Tier 4 final emissions compliance.
Mf 8650 Rated Hp:
240 hp @ 2200 rev/min (ISO TR14396)
Mf 8650 Max Hp:
270 hp @ 2000 rev/min (ISO TR14396)
Mf 8660 Rated Hp:
265 hp @ 2200 rev/min (ISO TR14396)
Mf 8660 Max Hp:
295 hp @ 2000 rev/min (ISO TR14396)
Mf 8670 Rated Hp:
290 hp @ 2200 rev/min (ISO TR14396)
Mf 8670 Max Hp:
320 hp @ 2000 rev/min (ISO TR14396)
Mf 8680 Rated Hp:
320 hp @ 2200 rev/min (ISO TR14396)
Mf 8680 Max Hp:
350 hp @ 2000 rev/min (ISO TR14396)
Mf 8690 Rated Hp:
340 hp @ 2200 rev/min (ISO TR14396)
Mf 8690 Max Hp:
370 hp @ 2000 rev/min (ISO TR14396)
Fuel System Type:
Common Rail Diesel Injection (CRDI) system with high-pressure fuel pump and injectors, managed by an electronic control unit (ECU).
Diesel Grade Specification:
Refer to manual for specific diesel grade (e.g., ULSD - Ultra-Low Sulfur Diesel) and ADBlue/DEF (Diesel Exhaust Fluid) requirements.
Standard Transmission Type:
Likely a Continuously Variable Transmission (CVT) or advanced Power Shift transmission, depending on specific model and configuration within the series.
Optional Transmission Type:
May include different ranges of Power Shift or variations of CVT.
Transmission Features:
Features such as speed management, automatic shifting, and PTO engagement control.
Wheelbase:
Variable by model, typically long wheelbase for stability.
Overall Length:
Variable by model and configuration.
Overall Width:
Variable by model and tire/axle configuration.
Operating Weight:
Significant, typically in the range of 10,000 - 15,000 kg (unladen).
Max Gross Vehicle Weight:
Substantially higher, allowing for ballast and heavy implement operation.
Oem Safety Standards:
Designed to meet or exceed relevant ROPS (Roll-Over Protective Structure) and FOPS (Falling-Object Protective Structure) safety standards.
Active Safety Features:
Includes advanced braking systems, stability control (if equipped), and operator presence detection.
Passive Safety Features:
ROPS/FOPS certified cab, seat belts, safety mirrors, and warning lights.
Cab Features Technology:
Advanced cab technology would include digital displays for engine monitoring, diagnostics, and potentially integration with GPS and precision farming systems (e.g., ISOBus compatible).
Precision Agriculture Support:
The series is likely designed for integration with GPS guidance, autosteer, section control, and variable rate applications, common in high-horsepower tractors of this era.
Diagnostic Connectivity:
Features like CAN bus communication for ECU data transfer and advanced diagnostic tool connectivity.
Engine Oil Change Interval:
Typically 500 hours, but always refer to the specific manual for the exact interval and recommended oil type.
Fuel Filter Replacement:
Recommended at regular intervals, e.g., 500 or 1000 hours, or as per diagnostic alerts.
Hydraulic Fluid Change:
Typically 1000-2000 hours, depending on operating conditions and fluid analysis.
Engine Oil Specification:
API CJ-4 or newer, SAE 15W-40 or 10W-40 (refer to manual for exact viscosity based on ambient temperature). Specific Massey Ferguson approved oils should be used.
Hydraulic Fluid Type:
Massey Ferguson approved UTTO (Universal Tractor Transmission Oil) or similar specification (e.g., John Deere Hy-Gard, Case IH TDTO). Capacity typically >100 liters.
Coolant Type:
Ethylene glycol based coolant with extended life additives (e.g., OAT - Organic Acid Technology). 50/50 mix with distilled water.
Common Issues And Solutions:
Potential issues may include SCR system faults (AdBlue sensor, injector, or dosing unit issues), DPF regeneration problems (if applicable), and transmission control module errors. The manual provides detailed diagnostics for these.
Massey Ferguson Legacy:
Massey Ferguson is a historic British brand with a long lineage of agricultural machinery innovation, known for robust and reliable tractors.
8600 Series Development:
The 8600 series represented a significant step forward in Massey Ferguson's tractor technology, incorporating advanced engine management and emissions control systems. It was part of the brand's strategy to offer high-spec, high-horsepower machines for modern farming.
Production Period:
The 8600 series was primarily produced in the late 2000s and early 2010s, aligning with the introduction of Tier 4 emission standards.
