Tractor Segment:
Mid-range utility tractor, suitable for a variety of agricultural tasks from fieldwork to farmyard management.
Competitors:
Competes with models from John Deere (e.g., 6000 series), New Holland (e.g., TS series), Case IH (e.g., Maxxum series), and Claas (e.g., Arion series) in its power class.
Engine Power:
Designed for efficient operation and robust performance in demanding agricultural environments.
Transmission Options:
Often equipped with advanced transmissions like Dyna-4 or Dyna-6 offering improved operator comfort and efficiency through power shifting and shuttle control.
Hydraulic Capacity:
Features a capable hydraulic system to power a wide range of implements and attachments.
User Benefit:
Enables owners and technicians to perform accurate maintenance, diagnose issues efficiently, and carry out repairs, reducing downtime and operational costs.
Manual Coverage:
Comprehensive repair and service information for the Massey Ferguson MF-8240 Xtra tractor.
Specific Tasks Covered:
Includes calibration of clutch engagement pressures, PTO engagement timing, and hydraulic flow rates.
Estimated Page Count:
High volume (typical for full workshop manuals, often exceeding 500 pages, specific count not provided in product info)
Manual Type:
Workshop Service Manual / Repair Manual
Language:
Likely English (standard for manufacturer documentation, though not explicitly stated)
Engine:
Detailed diagnostics, overhaul, tuning, and component repair for the Perkins 1104D-E44TA engine.
Transmission:
Service and repair procedures for the Dyna-4 or Dyna-6 transmission (depending on configuration), including shifting mechanisms, hydraulics, and control systems.
Hydraulic System:
Troubleshooting, repair, and adjustment of the main hydraulic pump, spool valves, lift arms, and auxiliary hydraulic circuits.
Powertrain:
Front axle, rear axle, differential, PTO (Power Take-Off) systems, and drive shafts.
Electrical System:
Wiring diagrams, component testing, starter motor, alternator, battery, lighting, and electronic control units (ECUs) if applicable.
Cooling System:
Radiator, water pump, thermostat, fan, and coolant flow diagnostics.
Fuel System:
Injection pump, injectors, fuel filters, fuel lines, and bleeding procedures.
Braking System:
Hydraulic brake system, brake discs, calipers, master cylinder, and parking brake.
Steering System:
Hydraulic power steering, steering column, and front wheel linkage.
Cab And Chassis:
Body panels, operator's station, heating, ventilation, and air conditioning (HVAC) system (if equipped).
Maintenance:
Scheduled maintenance tasks, lubrication points, fluid changes, filter replacements, and inspections.
Troubleshooting:
Diagnostic flowcharts and step-by-step guides for identifying and resolving common and uncommon issues.
Repair:
Detailed instructions for disassembling, repairing, and reassembling major components and systems.
Overhaul:
Complete engine and transmission rebuild procedures with specifications and tolerances.
Adjustment:
Calibration and adjustment procedures for critical systems like hydraulics, brakes, and PTO engagement.
Torques And Specifications:
Torque values for critical fasteners, critical clearances, and operating specifications for all systems.
Diagnostic Charts:
Includes detailed diagnostic flowcharts for electrical and hydraulic systems to aid in rapid problem identification.
Component Replacement:
Step-by-step instructions for replacing major components such as the alternator, starter, fuel injectors, hydraulic pump, and radiator.
Depth Of Information:
Extensive, covering from basic daily checks to complete engine and transmission overhauls and advanced diagnostics.
Precision Measurements:
Provides critical measurements, tolerances, and clearances required for engine and transmission rebuilds to factory specifications.
Engine Manufacturer:
Perkins
Engine Model:
1104D-E44TA (or similar variant in the 1104 series)
Engine Type:
4-cylinder, turbocharged, intercooled diesel engine
Displacement:
4.4 Liters (4400 cc)
Engine Cooling Method:
Water-cooled
Gross Horsepower Approximate:
Approximately 140 HP (This is an estimated figure for the MF-8240 Xtra, actual may vary slightly)
Peak Torque Approximate:
Around 500-550 Nm (This is an estimated figure, actual may vary)
Fuel Injection:
Common Rail Direct Injection (CRDI) or high-pressure mechanical injection system (depending on exact sub-model and year).
Emission Controls:
May feature EGR (Exhaust Gas Recirculation) and DPF (Diesel Particulate Filter) for Tier III/IV emissions compliance.
Engine Oil Type:
API CJ-4 or CK-4 SAE 15W-40 or 10W-40 (Consult manual for specific approved brands and grades)
Coolant Type:
Ethylene Glycol based, extended life coolant (OAT) with a 50/50 mix with distilled water.
Engine Oil Capacity:
Approximately 10-12 Liters (including filter)
Transmission Type Standard:
Dyna-4 or Dyna-6 powershift transmission
Transmission Type Optional:
Potentially a manual synchronised gearbox on some base models, but powershift is common for the 'Xtra' designation.
Powershift Gears:
Dyna-4 offers 4 powershift steps; Dyna-6 offers 6 powershift steps.
Shuttle Control:
Electronic power shuttle (left-hand reverser) for seamless forward/reverse changes.
Transmission Oil Type:
AGCO-HTF (Hydraulic Transmission Fluid) or equivalent approved synthetic tractor transmission oil.
Transmission Oil Capacity:
Approximately 35-45 Liters (varies by configuration)
Engine Oil Change:
Every 250-500 hours, depending on operating conditions and oil type (refer to manual for specifics).
Fuel Filter Replacement:
Every 500 hours or as needed based on fuel quality.
Hydraulic Oil Change:
Every 1000-2000 hours or annually.
Transmission Oil Change:
Every 1000-2000 hours.
Air Filter Servicing:
Inspect and service daily or weekly depending on dust conditions; replace as needed.
Hydraulic Oil Spec:
ISO VG 46 Hydraulic Oil (Universal Tractor Transmission Fluid - UTTO) or AGCO-HTF.
Common Wear Items:
Wear on clutch packs (if applicable), PTO spline wear, hydraulic pump wear, and potential electrical connector corrosion.
Common Diagnosis Areas:
Troubleshooting transmission clutch pack engagement issues, hydraulic system pressure loss, and electrical system faults related to sensors or wiring harnesses.
Massey Ferguson Legacy:
Massey Ferguson is a globally recognized brand with a long history of innovation in agricultural machinery, dating back to the 19th century.
Mf 8200 Series:
The MF 8200 series represented a significant advancement in Massey Ferguson's tractor technology, offering more powerful engines, advanced transmissions, and improved operator comfort compared to previous generations.
Production Period Approximate:
The 8200 series was produced roughly from the late 1990s through the early 2000s, with updates and 'Xtra' variants emerging during its lifecycle.
Manufacturing Location:
Typically manufactured in Massey Ferguson's key tractor production facilities, often in Europe (e.g., France, UK).
