Positioning:
Essential technical resource for owners and independent workshops seeking to maintain and repair the Moto Guzzi Bellagio.
Alternatives:
Compared to generic repair guides, this factory manual offers superior accuracy, detail, and scope specific to the Moto Guzzi Bellagio.
Lifetime Access:
Full manual with no expiry dates or renewal fees.
Multi Device Usage:
Usable on multiple computers and devices.
Professional Standard:
Content identical to manuals used by dealership technicians.
Platform Compatibility:
Compatible with Windows and macOS.
Instant Access:
Available for immediate download.
Engine:
Complete engine overhaul, disassembly, assembly, tuning, diagnostics, and troubleshooting for all Bellagio engine variants.
Fuel System:
Fuel injection system (EFI), throttle body, injectors, fuel pump, pressure regulator, fuel lines, and evaporative emissions control (EVAP).
Ignition System:
Ignition coils, spark plugs, ECU (Engine Control Unit) mapping, timing, and diagnostics.
Transmission:
Gearbox operation, disassembly, assembly, clutch operation, maintenance, and troubleshooting.
Chassis And Suspension:
Front fork (suspension travel, damping adjustments, seals), rear shock absorber (spring preload, damping, linkage maintenance), frame, swingarm, and wheel bearings.
Brakes:
Front and rear brake systems, hydraulic lines, master cylinders, calipers, brake pads, rotor inspection and replacement, bleeding procedures, and ABS (if applicable).
Electrical System:
Wiring diagrams, battery maintenance, charging system (alternator, regulator/rectifier), lighting, starter motor, horn, switches, relays, fuses, and diagnostic codes.
Bodywork And Fittings:
Fairings, body panels, seat, fuel tank, fenders, handlebars, instrumentation, and accessory fitting.
Cooling System:
Radiator, coolant, fans, hoses, and thermostat operation (if air-cooled, this would be less extensive).
Exhaust System:
Exhaust pipes, mufflers, catalytic converter (if applicable), gasket replacement, and inspection.
Maintenance:
Scheduled maintenance (oil changes, filter replacements, spark plug checks, chain adjustment, brake fluid flush), tire pressure checks, and general inspections.
Troubleshooting:
Step-by-step diagnostic procedures for common and uncommon issues, fault code interpretation, and problem-solving techniques.
Repair And Rebuild:
Detailed instructions for component disassembly, repair, replacement, and reassembly, including engine, gearbox, and suspension overhauls.
Technical Specifications:
Torque specifications, clearances, fluid capacities, electrical resistance values, and other critical data for accurate repair.
Depth:
Professional-level, covering everything from basic adjustments to complete engine rebuilds and complex electrical diagnostics.
Detail Level:
Highly detailed with step-by-step instructions, exploded diagrams, and photographs.
Engine Type:
Air-cooled, four-stroke, 90-degree V-twin, longitudinally mounted.
Displacement:
Typically 937cc or 1072cc depending on specific Bellagio generation/variant (exact for this manual not specified, but common for Bellagio).
Bore X Stroke:
Example for 937cc: 92 mm x 71 mm; for 1072cc: 95 mm x 71 mm (specifics will be in the manual).
Compression Ratio:
Typically around 9.8:1 to 10.3:1 (specifics in manual).
Valve Train:
Two valves per cylinder, pushrod actuated with rocker arms.
Horsepower:
Approximately 70-75 HP at 6,500 RPM (specifications vary by exact model year and configuration).
Torque:
Approximately 65-70 lb-ft at 3,200 RPM (specifics vary by exact model year and configuration).
Fuel Delivery:
Electronic Fuel Injection (EFI) with single throttle body.
Fuel Type:
Unleaded gasoline, minimum 91 octane (RON+MON)/2.
Fuel Tank Capacity:
Typically 15 liters (3.96 US gallons) (specifics in manual).
Oil Change Interval:
Typically every 6,000 km (3,700 miles) or 12 months (specifics in manual).
Valve Clearance Check:
Generally every 12,000 km (7,500 miles) or as specified in the manual.
Spark Plug Replacement:
Recommended every 12,000 km (7,500 miles) or as per manual's inspection.
Engine Oil Type:
SAE 10W-40 or 15W-50 API SG or higher (specific viscosity and API rating per manual). Full synthetic recommended.
Engine Oil Capacity:
Approx. 2.5 - 3.0 liters (2.6 - 3.2 US quarts) with filter change (specifics in manual).
Gearbox Oil Type:
SAE 75W-90 API GL-4 or GL-5 (specifics in manual).
Gearbox Oil Capacity:
Approx. 0.4 - 0.5 liters (0.4 - 0.5 US quarts) (specifics in manual).
Final Drive Oil Type:
SAE 80W-90 API GL-5 (specifics in manual).
Final Drive Oil Capacity:
Approx. 0.15 - 0.2 liters (0.16 - 0.21 US quarts) (specifics in manual).
Coolant Type:
Ethylene glycol-based antifreeze with corrosion inhibitors (if liquid-cooled, which Bellagio is not primarily, but may have secondary cooling).
Brake Fluid Type:
DOT 4 or DOT 5.1 (manual will specify exact type and replacement interval).
Common Issues:
Potential for minor electrical gremlins, clutch slave cylinder leaks (common on some Guzzis), and regular maintenance requirements for the shaft drive and air-cooled engine.
Heritage:
Moto Guzzi, founded in 1921, is renowned for its distinctive transverse V-twin engine architecture, rich racing history, and Italian craftsmanship.
Bellagio Origin:
The Bellagio was introduced in the mid-2000s as a modern interpretation of a classic Italian cruiser/roadster, blending classic styling with contemporary technology.
Engine Development:
Utilizes an evolution of the venerable Moto Guzzi small-block 90-degree V-twin engine, which has been a cornerstone of the brand for decades.
Production Period:
Production spanned from approximately 2007 to 2016 (exact years covered by the manual need to be confirmed by manual content).
Manufacturing Location:
Mandello del Lario, Italy.