Segment:
Performance Trail/Mountain Snowmobile
Target Audience:
Enthusiast riders and independent service technicians seeking detailed repair and maintenance information.
Manual Value Proposition:
Provides comprehensive, factory-level repair information essential for maintaining and troubleshooting the Yamaha VMAX series snowmobiles, crucial for extending vehicle life and performance.
Diagram Quality:
Features exploded diagrams before each disassembly section for clear identification of parts and procedures.
Procedural Format:
Step-by-step procedural format for ease of understanding and execution.
Covered Models:
2001 Yamaha VMAX 500, 2001 Yamaha VMAX 500 DELUXE, 2001 Yamaha VMAX 600, 2001 Yamaha VMAX 600 DELUXE, 2001 Yamaha VMAX 700, 2001 Yamaha VMAX 700 DELUXE, 2001 Yamaha Venture 700
Estimated Page Count:
400+
Manual Type:
Service Repair Maintenance Overhaul Workshop Manual
Engine Systems:
Engine disassembly, assembly, inspection, lubrication, cooling, ignition, fuel delivery, exhaust, compression testing, tuning.
Chassis Systems:
Frame, suspension (front and rear), steering, skis, track, drive clutch, driven clutch, chaincase, brakes.
Electrical Systems:
Wiring diagrams, lighting, ignition system, charging system, starter, sensors, handlebar controls, gauges.
Bodywork And Trim:
Body panel removal and installation, seat, windshield, storage compartments, graphics.
Maintenance Procedures:
Scheduled maintenance, oil changes, filter replacements, spark plug service, track adjustment, lubrication points, belt inspection and replacement.
Repair Procedures:
Engine overhaul (top and bottom end), carburetor repair/rebuild, clutch service, brake caliper overhaul, suspension component replacement, electrical component diagnosis and repair.
Troubleshooting Guides:
Diagnostic flowcharts for common starting, running, and performance issues. Specific troubleshooting for ignition, fuel, and electrical systems.
Overhaul Procedures:
Complete engine teardown and reassembly, including piston, ring, crankshaft, and cylinder head servicing. Transmission/chaincase rebuild procedures.
Diagnostic Capabilities:
Advanced diagnostics including electrical system testing, compression analysis, and fuel system pressure checks.
Rebuild Scope:
Complete engine rebuilds from bare block to fully assembled, including machining specifications and tolerances.
Special Tool Requirements:
Identification of specialized tools required for specific repair and overhaul procedures, with descriptions or part numbers where applicable.
Engine Type:
2-stroke, 3-cylinder, Reed Valve, Liquid Cooled (for 500, 600, 700 models)
Bore Stroke 500:
Approx. 69.6 mm x 54.4 mm
Bore Stroke 600:
Approx. 73.2 mm x 72.8 mm
Bore Stroke 700:
Approx. 73.2 mm x 79.4 mm
Horsepower 500 Est:
Approx. 95-100 HP
Horsepower 600 Est:
Approx. 110-115 HP
Horsepower 700 Est:
Approx. 125-130 HP
Carburetor Type 500:
Mikuni VM34 (Typical)
Carburetor Type 600 700:
Mikuni VM38 (Typical)
Fuel Type:
Unleaded gasoline (Octane rating specified in manual, typically 87 or higher)
Oil Injection:
Yamaha Autolube (Premix oil injection system)
Transmission Type:
CVT (Continuously Variable Transmission) with Drive and Driven Clutches
Gear Reduction:
Chaincase with integrated reverse gear (on some models)
Clutch Service:
Detailed procedures for drive and driven clutch inspection, cleaning, weight/spring changes, and belt replacement.
Chaincase Lubrication:
Specifications for chaincase oil type and capacity.
Braking System:
Hydraulic disc brakes (front and rear, caliper type and rotor specs detailed in manual).
Throttle Safety:
Throttle safety switch function and troubleshooting detailed.
Kill Switch:
Engine stop switch operation and wiring.
Handlebars And Controls:
Safe operation and maintenance of all controls.
Instrument Cluster:
Analog speedometer, tachometer, fuel gauge, temperature gauge, and indicator lights.
Throttle Control:
Responsive throttle system for precise control.
Ignition System:
CDI ignition system with electronic advance.
Oil Change Interval:
Refer to manual for specific mileage/time recommendations, typically seasonal or annual.
Spark Plug Replacement:
Recommended replacement intervals based on mileage/hours of operation (specific plug part numbers provided).
Clutch Belt Inspection:
Regular inspection of drive belt for wear, damage, and proper tension. Replacement recommended based on wear indicators.
Engine Oil Type:
Yamalube 2-stroke oil (Premix or Injection oil per Yamaha specifications).
Chaincase Oil Type:
Yamaha Hi-Temp Grease or equivalent specified gear oil (e.g., SAE 80W-90).
Coolant Type:
Antifreeze/coolant mixture (e.g., 50/50 ethylene glycol base) specified for extreme cold temperatures.
Carburetor Icing:
Common in cold, humid conditions; manual provides troubleshooting and potential solutions.
Clutch Wear:
Drive belts and clutch components can wear over time; manual details inspection and replacement.
Exhaust Valve Maintenance:
Periodic cleaning and inspection of exhaust power valves for carbon buildup to maintain optimal performance.
Yamaha Motorsports:
Yamaha has a long-standing reputation for performance, innovation, and reliability in the powersports industry, including snowmobiles.
Vmax Lineage:
The VMAX series is renowned for its powerful engines and sporty handling, a lineage that has seen continuous development and refinement.
Manufacturing Location:
Typically manufactured in Japan or North America by Yamaha Motor Corporation.
