Engine Variants Covered:
1.8L K-Series I4 Petrol (RV3, RV4), 2.5L KV6 V6 Petrol (KV6), 2.0L L-Series I4 Diesel (20T2N)
Transmission Variants Covered:
5-speed Manual, 4-speed Automatic (PG1 Gearbox for Manual, JATCO JF403E for Automatic)
Trim Levels Covered:
Covers all major trim levels including 3-door (Hardback/Softback) and 5-door variants, across different equipment specifications.
Estimated Page Count:
1500+ (comprehensive workshop manual)
Manual Type:
Workshop Repair Service Manual
Manual Focus:
Primarily a 'Repair and Service' manual, essential for maintenance, diagnostics, and repair of all vehicle systems.
Format:
Digital (Likely PDF, but not explicitly stated - assuming best quality digital format for sales)
Engine Mechanical:
Engine removal/installation, cylinder head, valve train, crankshaft, pistons, connecting rods, lubrication system, cooling system, timing belt/chain (if applicable), exhaust system.
Engine Management:
Fuel injection system (MPI), ignition system, sensors, ECU diagnostics, emissions control.
Transmission:
Manual transmission (clutch, gearbox, driveshafts), Automatic transmission (torque converter, valve body, planetary gears, control modules).
Drivetrain:
Viscous Coupling Unit (VCU), final drives, differentials, propeller shafts, constant velocity joints (CVJs).
Suspension:
Front suspension (MacPherson struts), rear suspension (independent trailing arms), springs, shock absorbers, bushings, wheel alignment.
Steering:
Power steering system, steering rack, steering column, linkages.
Brakes:
Front disc brakes, rear drum or disc brakes (depending on specification), anti-lock braking system (ABS), brake hydraulics, parking brake.
Electrical System:
Battery, charging system (alternator), starting system (starter motor), lighting, wipers, horn, power windows, central locking, fuse boxes, wiring diagrams.
Body And Chassis:
Body panel removal/installation, doors, hinges, latches, interior trim, seats, roof (hardtop/soft top), underbody corrosion protection.
HVAC:
Heating, ventilation, and air conditioning (HVAC) system, refrigerant, components, controls.
Lighting System:
Headlights, taillights, interior lighting, fog lights, bulb replacement procedures and wiring.
Tire And Wheel:
Tire pressure recommendations, wheel nut torque specifications, alloy wheel care.
Fuel System Diesel:
Diesel injection pump, injectors, fuel filter replacement, bleeding the fuel system.
Maintenance Procedures:
Oil changes, filter replacements, fluid checks and top-offs, spark plug replacement, belt inspection and replacement, brake fluid flush.
Repair Procedures:
Engine component repair, transmission overhaul, suspension component replacement, brake caliper overhaul, electrical component troubleshooting and replacement.
Troubleshooting Diagnostics:
Diagnostic trouble codes (DTCs), symptom-based diagnostics, step-by-step fault finding for all major systems.
Special Tools:
Identification of specific tools required for various repair and maintenance procedures.
Technical Specifications:
Torque values, clearances, fluid capacities, pressure specifications, electrical resistance values.
Body Repair:
Information on body panel alignment, rust prevention, door and window seal replacement, bumper repair.
Depth Of Coverage:
Comprehensive, covering routine maintenance to major component overhauls and diagnostics. Suitable for professional mechanics and experienced DIY enthusiasts.
Diagnostic Charts:
Includes comprehensive diagnostic charts and flowcharts for common problems.
1.8L K-Series Specs:
Displacement: 1796 cc, Bore x Stroke: 80.0 mm x 89.3 mm, Compression Ratio: 10.5:1, Power: 118 hp @ 5500 rpm, Torque: 120 lb-ft @ 4000 rpm.
2.0L L-Series Diesel Specs:
Displacement: 1994 cc, Bore x Stroke: 84.5 mm x 88.8 mm, Compression Ratio: 21.0:1, Power: 98 hp @ 4200 rpm, Torque: 150 lb-ft @ 2000 rpm.
2.5L Kv6 Specs:
Displacement: 2500 cc, Configuration: V6, Power: 177 hp @ 6500 rpm, Torque: 177 lb-ft @ 4000 rpm (approximate for early models).
1.8L K-Series Engine Code:
K18
2.0L L-Series Engine Code:
L20
2.5L Kv6 Engine Code:
KV6
0-60 Mph Approx:
11-13 seconds (depending on engine and transmission)
Fuel Injection Type:
Multi-Point Fuel Injection (MPI)
Recommended Fuel:
Unleaded gasoline (95 RON for petrol engines), Diesel fuel.
Oil Change Interval:
Every 10,000 miles or 12 months, whichever comes first (refer to manual for specific engine/oil type).
Timing Belt Replacement:
K-Series: 60,000 miles or 5 years. KV6: 90,000 miles or 5 years (critical replacement interval).
Transmission Fluid Change:
Manual: Inspection only, typically no scheduled change. Automatic: Every 40,000 miles or 4 years.
Engine Oil Type:
API SJ, ACEA A3/B3. Viscosity: 5W-30 or 10W-40 (depending on climate).
Coolant Type:
Ethylene glycol-based coolant, typically OAT (Organic Acid Technology) or HOAT (Hybrid OAT) for later models. Refer to manual for exact specification.
Power Steering Fluid:
ATF Dexron II/III or specific Land Rover fluid.
Manual Transmission Fluid:
API GL-4, SAE 75W/80 or 75W/90.
Automatic Transmission Fluid:
JATCO JF403E requires ATF Dexron III (or equivalent).
Engine Head Gasket:
K-Series engines are known for potential head gasket failures, particularly if overheated or improperly maintained. The manual will detail inspection and replacement.
Viscous Coupling Unit Vcu:
The VCU can wear out over time, leading to poor 4WD performance or binding. Manual covers diagnostic and replacement procedures.
Interior Electrics:
Some early models may experience issues with power windows, central locking, or body control modules. Wiring diagrams are crucial.
Diesel Engine Glow Plugs:
L-Series diesel can be sensitive to cold starts if glow plugs are worn. Manual details their replacement and testing.
Kv6 Timing Belts:
The KV6 uses two timing belts, and failure to adhere to the replacement schedule can cause catastrophic engine damage. Manual provides detailed procedure.