Segment:
Dual-sport / Enduro motorcycle
Target Audience:
DIY enthusiasts, independent repair shops, Husqvarna owners
Competitors Manuals:
Comparable to factory workshop manuals from KTM, Aprilia, and other European dual-sport manufacturers of the era.
Comprehensiveness:
Detailed, step-by-step procedures for a wide range of repair and maintenance tasks.
Diagrams Illustrations:
Expected to include technical illustrations and diagrams for clarity.
Utility:
Indispensable tool for efficient and accurate servicing of the TE 610E LT.
Engine:
Detailed engine disassembly, assembly, tuning, diagnostics, lubrication, cooling system
Transmission:
Clutch, gearbox, shifting mechanisms, oil specifications
Fuel System:
Carburetor (type specific, e.g., Mikuni/Dell'Orto), fuel pump, fuel lines, tank maintenance
Ignition System:
CDI, spark plug specifications, timing, troubleshooting
Electrical System:
Wiring diagrams, lighting, battery, starter, charging system, fuses, relays
Suspension:
Front fork (e.g., Marzocchi/WP) overhaul, rear shock absorber service, linkage maintenance, oil levels and types
Brakes:
Hydraulic brake systems (front and rear), caliper overhaul, master cylinder service, brake fluid specifications, bleeding procedures
Wheels And Tires:
Tire pressure recommendations, wheel bearing maintenance, spoke tensioning (if applicable), rim specifications
Frame And Bodywork:
Chassis inspection, subframe, body panel removal and installation, seat, handlebars
Exhaust System:
Exhaust pipe inspection, muffler service
Maintenance:
Regular service checks, oil changes, filter replacements, chain adjustment, lubrication points
Repair:
Component repair and replacement, internal engine work, transmission rebuilds, suspension servicing
Disassembly Assembly:
Step-by-step instructions for dismantling and reassembling all major vehicle components
Troubleshooting:
Diagnostic charts and guidance for identifying and resolving common and uncommon problems
Adjustments:
Carburetor tuning, chain slack, clutch lever free play, suspension settings
Torque Specifications:
Essential torque values for critical fasteners across all systems
Depth:
Comprehensive from basic maintenance to complete engine and transmission overhauls
Diagnostic Capability:
Advanced diagnostic procedures for electrical and mechanical systems
Rebuild Instructions:
Detailed instructions for rebuilding major components like engines and carburetors
Engine Type:
Four-stroke, single-cylinder
Displacement:
Approximately 576cc (specific bore/stroke needed from manual)
Cooling System:
Liquid-cooled
Bore X Stroke:
Specific values available in manual
Compression Ratio:
Specific value available in manual
Horsepower:
Estimated 45-50 HP (actual figures in manual)
Torque:
Specific figures available in manual
Carburetor Type:
Likely Mikuni VM or Dell'Orto PHM (specific model in manual)
Fuel Type:
Unleaded gasoline
Fuel Capacity:
Approx. 12-14 liters (specifics in manual)
Length:
Specifics documented in manual
Width:
Specifics documented in manual
Height:
Specifics documented in manual
Dry Weight:
Approx. 130-140 kg (specifics in manual)
Wet Weight:
Specifics documented in manual
Gvwr:
Not typically specified for this class of motorcycle, but gross vehicle weight limits for payload would be in manual.
Crash Test Results:
N/A (Motorcycles are not subjected to standardized automotive crash tests)
Braking System:
Hydraulic disc brakes front and rear
Lighting:
Headlight, taillight, brake light, turn signals (depending on LT specification)
Frame Construction:
Steel trellis frame for rigidity and impact absorption
Ergonomics:
Designed for off-road control and stability.
Oil Change Interval:
Typically every 3,000-5,000 km or annually (verify specific interval in manual).
Air Filter Cleaning:
Frequent checks, especially after off-road use, cleaning/replacement per manual recommendations.
Spark Plug Replacement:
Specific mileage interval documented in manual.
Valve Clearance Check:
Interval specified in manual, crucial for engine health.
Chain Adjustment Lubrication:
Regular checks and lubrication, interval depends on usage.
Engine Oil Type:
Specific viscosity grade (e.g., 10W-40, 20W-50) and API classification (e.g., SG, SH, SJ) provided in manual.
Engine Oil Capacity:
Specific volume in liters/quarts for oil change with filter change, provided in manual.
Coolant Type:
Ethylene glycol based antifreeze mixture with distilled water (specific ratio in manual).
Brake Fluid Type:
DOT 4 or DOT 5.1 hydraulic brake fluid (verify exact specification in manual).
Common Wear Items:
Clutch plates, chain and sprockets, wheel bearings, fork seals are common wear items on dual-sports.
Electrical Gremlins:
Older European bikes can sometimes exhibit minor electrical connection issues if not maintained.
Carburetor Tuning:
May require periodic fine-tuning for optimal performance and fuel economy, especially with altitude changes.
Manufacturer Origin:
Swedish motorcycle manufacturer with a long history in off-road racing.
Te Series:
The TE series has a lineage of high-performance off-road and dual-sport motorcycles, with the 610 model being a popular displacement size.
1998 Updates:
Specific updates for 1998 are detailed in the manual, potentially including chassis refinements, engine tuning, or suspension components.
Manufacturing Location:
Likely Italy, as Husqvarna was owned by Cagiva Group during this period.
