Engine:
Comprehensive coverage including tune-ups, diagnostics, removal/installation, and overhaul
Fuel System:
Detailed procedures for fuel pump, injectors, fuel filter, and associated components
Ignition System:
Covers spark plugs, ignition coils, timing, and diagnostic procedures
Lubrication System:
Information on oil pump, oil filter, lubrication passages, and oil change procedures
Exhaust System:
Repair and replacement procedures for exhaust manifolds, catalytic converters, mufflers, and pipes
Electrical System:
Extensive coverage of wiring diagrams, component testing, battery, alternator, starter, lighting, and accessories
Body:
Includes procedures for interior and exterior trim, doors, windows, seats, and body panel repair
Transmission:
Detailed repair and overhaul procedures for both manual and automatic transmissions
Steering System:
Procedures for power steering pump, rack and pinion, and associated components.
Suspension System:
Detailed repair and replacement of struts, shock absorbers, control arms, ball joints, and bushings.
Braking System:
Comprehensive coverage including disc and drum brake systems, hydraulic components, and parking brake.
Cooling System:
Procedures for radiator, water pump, thermostat, cooling fans, and hoses.
Climate Control:
Information on HVAC system components, refrigerant handling, and diagnostics.
Chassis And Frame:
Guidelines for frame inspection and repair where applicable.
Wheels And Tires:
Specifications for tire sizes, inflation pressures, and wheel mounting procedures.
Routine Maintenance:
Covers scheduled maintenance, fluid checks, filter replacements, and basic inspections
Troubleshooting:
Diagnostic charts and procedures for identifying and resolving common and uncommon issues
Repair Overhaul:
In-depth instructions for dismantling, repairing, and reassembling major vehicle components
Assembly Disassembly:
Step-by-step guides for component removal and installation
Engine Diagnostics:
Detailed engine trouble codes (DTCs) and diagnostic flowcharts.
Transmission Diagnostics:
Troubleshooting for both manual and automatic transmission issues.
Electrical Diagnostics:
Systematic approach to diagnosing electrical faults using wiring diagrams and test equipment.
Emissions Control:
Information on emissions-related components and testing procedures.
Depth:
Comprehensive, suitable for professional technicians and knowledgeable DIY enthusiasts
Diagnostic Capability:
Advanced diagnostic procedures and troubleshooting guidance
Proprietary Components:
Includes instructions for proprietary components and references manufacturer guidelines where applicable
Illustrations:
Likely includes diagrams and illustrations to aid in repair procedures.
Special Tools:
Identifies and illustrates special tools recommended or required for specific adjustments or repairs, often with Holden part numbers.
Oil Change Interval:
Typical intervals are 10,000-15,000 km or 6-12 months, depending on driving conditions (manual provides precise recommendations).
Air Filter Replacement:
Recommended at intervals specified in the manual, often around 20,000-30,000 km or annually.
Spark Plug Replacement:
Varies based on plug type (e.g., copper vs. platinum/iridium), typically between 40,000-100,000 km.
Engine Oil Type:
Manual specifies the correct SAE viscosity grade (e.g., 5W-30 or 10W-40) and API service classification for optimal engine protection.
Coolant Type:
Specifies the required type of engine coolant (e.g., silicate-free or HOAT) and the correct mixture ratio.
Brake Fluid Type:
DOT 3 or DOT 4 brake fluid as specified by Holden for optimal braking performance and system longevity.
Common Problems:
While not explicitly stated, common small car issues in this era could include minor electrical gremlins, wear on suspension components, and potential exhaust system corrosion. The manual aids in diagnosing and resolving these.
Importance:
The manual emphasizes the use of a torque wrench to ensure fasteners are tightened to precise specifications, crucial for engine, transmission, and suspension components.
