Primary Coverage:
Engine, Chassis, Electrical System, Bodywork, Transmission, Suspension, Brakes, Fuel System
Secondary Coverage:
Troubleshooting, Maintenance, Specifications, Diagrams, Torque Values, Part Identification
Type:
Factory Repair Service Manual
Engine:
Complete disassembly, assembly, inspection, troubleshooting of the 449cc liquid-cooled, four-stroke, single-cylinder engine. Includes cylinder, piston, conrod, crankshaft, camshaft, valves, timing, lubrication, cooling system, EFI.
Fuel System:
EFI system components, fuel pump, injectors, throttle body, idle control, fuel tank, fuel lines, troubleshooting EFI error codes.
Transmission:
Clutch operation and adjustment, primary reduction gear, gearbox disassembly, inspection, assembly, shift mechanism, lubrication.
Drivetrain:
Rear drive system, axle, chain, sprocket maintenance and replacement.
Suspension:
Front telescopic forks (including adjustment, oil changes, seal replacement), rear single shock absorber (including adjustment, rebuild), A-arms, swingarm, linkage.
Brakes:
Front and rear disc brake systems, caliper disassembly, pad replacement, fluid flush and bleed, master cylinder, brake lines, hydraulic system.
Electrical System:
Ignition system (CDI, spark plug), starting system (starter motor, battery, charging system, magneto, stator, regulator/rectifier), lighting, wiring diagrams, fuses, switches.
Bodywork:
Fenders, plastics, seat, handlebars, steering components (triple trees, steering stem), body panel removal and installation.
Wheels And Tires:
Wheel bearing maintenance, tire pressure specifications, tire replacement advice.
Maintenance:
Scheduled maintenance intervals, oil changes, filter replacements, chain adjustment, valve clearance checks and adjustment, spark plug replacement, coolant flushes.
Troubleshooting:
Comprehensive diagnostics for common issues, no spark, starting problems, engine performance issues, electrical faults, EFI error codes.
Repair Rebuild:
Complete tear down and rebuild procedures for all major components, including engine overhaul, transmission rebuild, suspension service, brake caliper rebuild.
Installation:
Installation procedures for key components and accessories.
Depth:
Expert-level, covering complete engine rebuilds, complex electrical diagnostics, and detailed component-level repairs. Suitable for DIY enthusiasts and professional technicians.
Features:
Includes detailed diagrams, part identification, exploded views, torque specifications, fluid capacities, and diagnostic flowcharts.
Engine Type:
449cc, Liquid-cooled, four-stroke, DOHC, four-valve, single-cylinder
Bore X Stroke:
96.0 x 62.1 mm
Compression Ratio:
12.0:1
Horsepower Est:
Approx. 50-55 HP (Varies with tuning and conditions)
Torque Est:
Approx. 30-35 lb-ft (Varies with tuning and conditions)
Fuel Delivery:
Digital Fuel Injection (DFI) with dual 32mm Keihin throttle bodies
Fuel Type:
Unleaded gasoline (91 octane or higher recommended)
Oil Type Recommendation:
SAE 10W-40 API SG or higher, JASO MA certified motorcycle oil
Oil Capacity W Filter:
Approx. 1.7 L (1.8 US qt)
Coolant Type:
Kawasaki specified coolant (50% ethylene glycol and 50% deionized water)
Engine Oil Change:
Every 10 hours of operation or annually, whichever comes first.
Air Filter Cleaning:
Every 5 hours of operation or as needed, depending on conditions.
Valve Clearance Check:
Every 10 hours of operation or annually.
Spark Plug Replacement:
Every 20 hours of operation or annually.
Coolant Replacement:
Every 24 months or as specified.
Engine Oil:
SAE 10W-40 API SG or higher, JASO MA certified
Brake Fluid:
DOT 4 hydraulic brake fluid
Coolant:
50% ethylene glycol and 50% deionized water mixture
Common Problems:
Potential for rear axle bearing wear, occasional clutch drag, EFI sensor calibration issues. The manual addresses these and provides diagnostic steps.