Engine Mechanical:
Engine assembly, cylinder head, block, crankshaft, pistons, connecting rods, camshafts, valve train, lubrication system, cooling system, fuel delivery, intake manifold, exhaust manifold, timing components.
Engine Performance:
Engine management system, ignition system, emission control systems, fuel injection, turbocharger/supercharger (if applicable), engine diagnostics and troubleshooting.
Transmission Mechanical:
Automatic transmission (e.g., 6F50/6F55), torque converter, transmission fluid, valve body, clutch packs, planetary gear sets, seals, gaskets, transmission removal and installation.
Transmission Electronic:
Transmission control module (TCM), shift solenoids, speed sensors, park/neutral position switch, diagnostic trouble codes (DTCs) related to transmission.
Drivetrain:
Front-wheel drive (FWD) components, drive axles, CV joints, differential (integrated with transmission), rear suspension components (if applicable).
Suspension:
Front suspension (e.g., MacPherson strut, control arms, ball joints, stabilizer bar), rear suspension (e.g., independent multi-link), springs, shock absorbers/struts, wheel bearings, alignment specifications.
Steering:
Power steering system (hydraulic or electric assist), steering column, steering rack/gearbox, tie rod ends, power steering fluid, troubleshooting steering issues.
Brakes:
Front and rear disc brakes, brake calipers, brake pads, brake rotors, brake lines, master cylinder, brake fluid specifications, anti-lock braking system (ABS) components and diagnostics, parking brake system.
Electrical System:
Battery, alternator, starter motor, wiring diagrams, fuses, relays, lighting system (headlights, taillights, interior lights), horn, power outlets.
Body And Chassis:
Body panels, doors, hood, trunk, bumpers, glass, seals, interior trim, chassis components, rust prevention, corrosion repair.
HVAC:
Heating, ventilation, and air conditioning (HVAC) system, refrigerant, compressor, condenser, evaporator, blower motor, climate control module, AC service procedures.
Infotainment And Electronics:
Audio system, navigation system, climate control interface, instrument cluster, power windows, power locks, mirrors, keyless entry, basic diagnostic procedures for modules.
Scheduled Maintenance:
Oil changes, filter replacements, fluid checks and top-offs, tire rotations, brake inspections, spark plug replacement, drive belt inspection/replacement.
Troubleshooting Guides:
Step-by-step diagnostic procedures for common and uncommon issues across all major vehicle systems.
Repair Procedures:
Detailed, illustrated instructions for component removal, replacement, and reassembly for virtually every part of the vehicle.
Diagnostic Trouble Codes:
Interpretation and resolution steps for DTCs generated by the vehicle's various control modules.
Wiring Diagrams:
Comprehensive electrical schematics for all circuits, illustrating component connections and wire routing.
Specifications And Tolerances:
Precise measurements, torque values, fluid capacities, and operational parameters for all serviceable components.
Depth Of Coverage:
Comprehensive from basic fluid changes and filter replacements to complex engine and transmission overhauls, including electrical system diagnostics and body repair.
Oil Change Interval:
Every 7,500 miles (12,000 km) or 6 months, whichever comes first, using synthetic blend oil. Refer to manual for severe driving conditions.
Tire Rotation Interval:
Every 7,500 miles (12,000 km) or with every oil change.
Engine Air Filter Replacement:
Inspect every 15,000 miles (24,000 km), replace as needed or every 30,000 miles (48,000 km).
Cabin Air Filter Replacement:
Inspect annually, replace as needed or every 15,000 miles (24,000 km).
Spark Plug Replacement:
100,000 miles (160,000 km) with iridium-tipped spark plugs.
Engine Oil Type:
SAE 5W-20 (meeting Ford Specification WSS-M2C153-H) - Synthetic Blend Recommended.
Engine Oil Capacity:
Approx. 5.5 - 6.0 quarts (5.2 - 5.7 liters) with filter change.
Coolant Type:
Ford Premium Engine Coolant (VC-7B) - Orange, ethylene glycol-based.
Brake Fluid Type:
DOT 3 (meeting Ford Specification WSS-M6C65-A2).
Power Steering Fluid Type:
MERCON V (meeting Ford Specification XT-5-QMC) - if hydraulic power steering.
Transmission Hard Shifts:
Occasional reports of rough or hesitant shifting, often addressed with software updates or transmission fluid service.
Powertrain Control Module Faults:
Potential for PCM issues leading to various engine and transmission performance anomalies.
Suspension Noise:
Front suspension components (struts, ball joints, sway bar links) can develop noise over time.
HVAC Blend Door Actuator:
Common issue with HVAC blend door actuators failing, leading to improper temperature control or air distribution.
Fuel Pump Module:
Some reports of premature fuel pump module failure.