Category:
Mid-size utility ATV
Target Audience:
Recreational riders, hunters, farmers, and those seeking a capable 2-up ATV for trail riding and utility tasks.
Competitors:
Polaris Sportsman 550/570, Can-Am Outlander 500/570, Yamaha Grizzly 550/570, Suzuki King Quad 500/500AXi.
Seating Capacity:
2-Up ('TRV' designation indicates this) with a rear passenger seat and footrests.
Engine Configuration:
Single-cylinder, liquid-cooled engine.
Drivetrain Capability:
Switchable 2WD/4WD with front differential lock for enhanced traction.
Suspension Type:
Independent front and rear suspension for a comfortable ride and good ground clearance.
Engine:
Complete engine overhaul, diagnostics, repair procedures, component specifications, troubleshooting for the 550cc engine.
Transmission:
Automatic transmission (CVT - Continuously Variable Transmission) repair, maintenance, clutch service, belt replacement, fluid specifications, and adjustments.
Drivetrain:
Front and rear differential service, driveshaft inspection and repair, AWD system operation and maintenance, wheel hub and bearing service.
Suspension:
Front and rear suspension component inspection, replacement of shocks, springs, control arms, bushings, and alignment procedures.
Brakes:
Hydraulic brake system diagnostics, caliper service, master cylinder repair, brake line replacement, bleeding procedures, pad and rotor replacement, parking brake adjustments.
Steering:
Steering column, tie rod end service, power steering system (if applicable), steering rack inspection and repair.
Electrical System:
Wiring diagrams, battery maintenance and testing, starter motor, alternator (charging system), ignition system troubleshooting, lighting system service, fuse and relay identification, accessory circuits.
Fuel System:
Fuel tank service, fuel pump testing, fuel filter replacement, carburetor or fuel injection system diagnostics and cleaning, fuel line inspection.
Cooling System:
Radiator service, fan operation, thermostat replacement, coolant specifications, flushing procedures, water pump inspection.
Exhaust System:
Muffler and pipe inspection and replacement, exhaust gasket service.
Body And Frame:
Body panel removal and installation, seat service, storage compartment access, frame inspection for damage, plastic component repair.
Tools And Equipment:
Recommended tools, special service tools (SSTs), torque specifications for all fasteners.
Maintenance:
Routine maintenance tasks such as oil changes, filter replacements, spark plug checks, lubrication points, tire pressure checks, battery maintenance, and belt inspection.
Troubleshooting:
Diagnostic charts, symptom-based troubleshooting guides, and step-by-step procedures for identifying and resolving common and complex issues.
Repair:
Detailed step-by-step instructions for disassembling, repairing, and reassembling all major components and systems of the ATV.
Disassembly Assembly:
Complete procedures for removing and reinstalling all parts, including torque specifications and critical alignment instructions.
Adjustments:
Carburetor/fuel injection adjustments, idle speed settings, throttle cable adjustments, brake lever travel adjustments, chain/belt tension adjustments.
Electrical Diagnostics:
Troubleshooting electrical faults using multimeters, checking continuity, voltage, and resistance values. Interpretation of wiring diagrams.
Performance Tuning:
Information related to engine tuning and optimal performance settings, though typically limited to factory specifications.
Depth Level:
Comprehensive, covering everything from basic maintenance to complete engine and transmission overhauls and advanced diagnostics.
Diagnostic Capabilities:
Advanced diagnostic procedures, including testing specific electrical components, fuel system pressures, and mechanical tolerances.
Rebuild Instructions:
Detailed instructions for rebuilding major components like the engine, transmission, differentials, and calipers.
Length:
Approx. 85.7 inches (2177 mm) (typical for this class, verify in manual)
Width:
Approx. 47.1 inches (1196 mm) (typical for this class, verify in manual)
Height:
Approx. 47.8 inches (1214 mm) (typical for this class, verify in manual)
Wheelbase:
Approx. 50.5 inches (1283 mm) (typical for this class, verify in manual)
Ground Clearance:
Approx. 10.25 inches (260 mm) (typical for this class, verify in manual)
Front Rack Capacity:
Approx. 100 lbs (45 kg) (typical for this class, verify in manual)
Rear Rack Capacity:
Approx. 200 lbs (90 kg) (typical for this class, verify in manual)
Dry Weight:
Approx. 655 lbs (297 kg) (typical for this class, verify in manual)
Towing Capacity:
Approx. 1050 lbs (476 kg) (typical for this class, verify in manual)
于G Capacity:
Approx. 300 lbs (136 kg) (typical for this class, verify in manual)
Engine Oil Change:
Every 100 hours or annually, whichever comes first (refer to manual for exact interval).
Air Filter Cleaning:
Every 50 hours or as needed, especially in dusty conditions (refer to manual).
Spark Plug Inspection:
Every 100 hours or annually (refer to manual for specific plug type and gap).
Cvt Belt Inspection:
Every 50 hours or annually, replace as needed based on wear (refer to manual).
Brake Fluid Flush:
Every 2 years or as recommended by the manufacturer (refer to manual).
Engine Oil:
SAE 0W-40 Synthetic ATV Oil (Arctic Cat's recommendation, specific API/JASO rating in manual).
Engine Oil Capacity:
Approx. 2.1 quarts (2.0 Liters) with filter change (verify in manual).
Coolant:
Ethylene glycol based antifreeze, 50/50 mix with distilled water (Arctic Cat branded or equivalent, refer to manual).
Brake Fluid:
DOT 3 or DOT 4 hydraulic brake fluid (verify specific type in manual).
Transmission Fluid:
Specific CVT/transmission fluid (Arctic Cat brand recommended, refer to manual for exact specification).
Common Wear Items:
CVT belt, suspension bushings, tie rod ends, brake pads due to typical ATV usage.
Electrical Connections:
Potential for corrosion in connectors exposed to elements, requiring periodic inspection and cleaning.
Engine Performance Tips:
Regularly cleaning the air filter and checking/adjusting valve clearances (as per manual) are crucial for maintaining optimal engine performance.
