🏷️ Basic Information

Make:

BMW

Model:

C1 & C1 200

Product Type:

Workshop Service & Repair Manual

👋 Introduction

Vehicle Segment:

The BMW C1 and C1 200 are unique scooter-maxi-scooter hybrids, offering enclosed cabin-like protection, positioning them in a niche urban mobility segment.

Competitors:

Competed against traditional maxi-scooters and smaller enclosed vehicles in the urban transport market, offering a distinctive safety and comfort proposition.

Vehicle Design:

The C1's defining feature is its semi-enclosed body with a safety cage, roll-over bar, and integrated seatbelt, providing enhanced occupant safety over conventional scooters.

Manual Value Proposition:

Empowers owners and technicians with the knowledge to perform maintenance and repairs, reducing reliance on specialized dealerships and saving significant costs.

📋 Manual Details

General Coverage:

Comprehensive service, repair, troubleshooting, and maintenance information for BMW C1 and C1 200 models.

Estimated Pages:

Approximately 300-500 pages (typical for this type of manual, actual count not specified).

Type:

Workshop Service and Repair Manual

Language:

English (presumed, common for international market manuals).

Format:

Digital (likely PDF) or Printed (depending on product offering, description implies detailed resource).

📖 Manual Coverage

Engine Service:

Engine disassembly, assembly, inspection, diagnostics, performance tuning, and specific component repair.

Fuel System Service:

Fuel injection system, fuel pump, fuel filter, injectors, and fuel delivery diagnostics.

Ignition System Service:

Ignition coils, spark plugs, ignition timing, and related electronic components.

Cooling System Service:

Radiator, coolant, water pump, thermostat, and system flushing/filling procedures.

Exhaust System Service:

Exhaust pipes, muffler, catalytic converter, and emissions control components.

Transmission Service:

Transmission disassembly, assembly, fluid changes, seal replacement, and clutch service (if applicable).

Suspension Service:

Front and rear suspension components, shock absorbers, springs, bushings, and alignment procedures.

Steering System Service:

Steering column, steering rack, power steering system (if equipped), and linkages.

Brake System Service:

Brake pads, rotors, calipers, brake lines, master cylinder, bleeding procedures, and ABS diagnostics.

Electrical System Service:

Wiring diagrams, battery, charging system (alternator), starter motor, lighting, and accessory circuits.

Body And Frame Service:

Body panel removal/installation, interior trim, door mechanisms, and chassis repair.

Diagnostic Procedures:

Troubleshooting guides, common fault codes, diagnostic techniques, and repair strategies.

Routine Maintenance:

Oil changes, filter replacements, fluid checks, tire rotations, and general inspection procedures.

Component Replacement:

Step-by-step instructions for replacing major and minor components across all systems.

Overhaul Procedures:

Detailed procedures for engine and transmission overhauls, including torque specifications and assembly sequences.

Troubleshooting Flowcharts:

Systematic diagnostic flowcharts for identifying and resolving common and complex issues.

Depth:

Comprehensive, suitable for professional technicians and advanced DIY mechanics, covering everything from basic maintenance to complete engine rebuilds.

📊 Manual Specifications

Digital Format:

PDF (Portable Document Format), ensuring wide compatibility and searchability.

Image Resolution:

High-resolution diagrams and illustrations for clarity.

Printed Binding:

Coil-bound or perfect-bound for durability and lay-flat usability (if offered as a printed product).

Printed Paper:

Durable, coated paper stock to withstand workshop conditions (if offered as a printed product).

⚙️ Engine Specifications

Engine Type:

Single-cylinder, four-stroke gasoline engine.

Displacement:

125cc (for C1) and 176cc (for C1 200).

Bore X Stroke:

C1: 52 mm x 58.2 mm; C1 200: 64 mm x 55 mm (typical values, manual will confirm precise figures).

Compression Ratio:

C1: 10.5:1; C1 200: 10.0:1 (typical values).

Horsepower:

C1: Approx. 15 hp @ 7,000 rpm; C1 200: Approx. 18 hp @ 7,000 rpm (estimated).

Torque:

C1: Approx. 14 Nm @ 5,000 rpm; C1 200: Approx. 17 Nm @ 5,500 rpm (estimated).

Fuel Delivery:

Electronic Fuel Injection (EFI) with Bosch Motronic (or similar) engine management system.

Fuel Type:

Unleaded Gasoline (RON 91 or higher).

Oil Type:

SAE 15W-50 or 10W-40, API SG or higher (manual will specify exact BMW approval).

Oil Capacity:

Approximately 1.5 - 1.8 liters (manual will provide exact fill quantity).

🔧 Transmission

Type:

Automatic Continuously Variable Transmission (CVT).

Drive System:

Belt drive to rear wheel.

📐 Dimensions

Length:

Approx. 2000 mm - 2100 mm (typical for maxi-scooters, manual will confirm precise figures).

Width:

Approx. 750 mm - 850 mm (including mirrors).

Height:

Approx. 1300 mm - 1400 mm (including windshield).

Dry Weight:

C1: Approx. 155 kg; C1 200: Approx. 160 kg (estimated).

Gross Vehicle Weight Rating:

Approx. 330 kg (manual will provide exact GVWR).

🛡️ Safety Features

Crash Safety:

Designed with a safety cage and roll-over protection, significantly exceeding typical scooter safety standards. Featured a built-in 3-point seatbelt.

Braking System:

Disc brakes front and rear, often with ABS (Anti-lock Braking System) as an option or standard on certain trims/years.

Lighting:

Halogen or projector headlamps, LED taillights and indicators.

Occupant Protection:

Integral safety cell, deformable steering column, internal padding, and the aforementioned seatbelt.

💡 Technology Features

Features:

Basic instrumentation including speedometer, tachometer, fuel gauge, and warning lights. Some models may have had optional audio systems or heated grips.

ABS:

Optional Anti-lock Braking System (ABS) available on some models, enhancing braking safety.

Features:

Limited to diagnostic connectors for ECU communication. No modern Bluetooth or smartphone integration.

🔧 Maintenance

Oil Change:

Every 5,000 - 7,500 km or annually (manual will provide precise interval).

Spark Plug Replacement:

Every 10,000 - 15,000 km (manual will specify exact type and interval).

Air Filter Replacement:

Every 5,000 - 10,000 km or as needed based on operating conditions.

Cvt Belt Inspection Replacement:

Inspection every 5,000 km, replacement typically between 15,000 - 25,000 km (manual is crucial here).

Coolant Type:

BMW approved ethylene glycol based coolant concentrate mixed with distilled water (50/50 ratio).

Brake Fluid:

DOT 4 Low Viscosity (LV) brake fluid.

Common Problems:

Potential issues can include CVT belt wear, electrical connector corrosion, aging rubber components (hoses, seals), and starter motor issues. The manual will detail diagnostic procedures for these.

Maintenance Tips:

Regular cleaning of electrical contacts, thorough inspection of the CVT belt and variator, and ensuring the battery is well-maintained are key.

📚 Vehicle History

Manufacturer:

Bayerische Motoren Werke AG (BMW), a renowned German manufacturer of luxury vehicles and motorcycles.

Introduction Year:

The BMW C1 was introduced in 2000, with the C1 200 variant following later.

Production Period:

Production ran from 2000 to approximately 2004-2005, reflecting a niche product lifecycle.

Manufacturing Location:

Primarily manufactured in Italy by Bertone, under contract for BMW.

🏆 Awards & Recognition

Safety Innovation:

While specific awards are not widely publicized, the C1 was recognized for its pioneering approach to scooter safety and occupant protection, setting a benchmark for the segment.