Tractor Segment:
Utility tractor, popular for small to medium-sized farms and agricultural operations.
Key Competitors:
New Holland TD/TT series, John Deere 5000/6000 series, Mahindra 5000/6000 series, Massey Ferguson 4700/5700 series.
Operator Comfort:
Designed for extended operating hours with ergonomic controls and comfortable seating.
Versatility:
Suitable for a wide range of agricultural tasks including ploughing, planting, harvesting, and loader work.
Durability:
Built with robust components for reliable performance in demanding farm environments.
Engine:
Detailed diagnostics, repair procedures, specifications, and component removal/installation for diesel engines.
Transmission:
Repair and maintenance of powershift, mechanical, and hydrostatic transmission systems (if applicable).
Drivetrain:
Front and rear axle repair, differentials, PTO (Power Take-Off) systems, and drive shafts.
Hydraulics:
Hydraulic pump, valve body, cylinders, hoses, and control systems troubleshooting and repair.
Electrical System:
Wiring diagrams, starter, alternator, battery, lighting systems, sensors, and electronic control unit (ECU) diagnostics.
Braking System:
Hydraulic brake system inspection, repair, and component replacement.
Steering System:
Power steering pump, gearbox, linkage, and hydraulic steering control repair.
Cooling System:
Radiator, fan, thermostat, water pump, and coolant hose inspection and replacement.
Fuel System:
Fuel tank, lines, filters, injection pump, and injectors troubleshooting and service.
Operator Station:
Dashboard, controls, seating, HVAC (if equipped), and cab components.
Body And Chassis:
Frame, fenders, hood, and structural components.
Routine Maintenance:
Oil changes, filter replacements, lubrication points, and general inspections.
Troubleshooting:
Diagnostic flowcharts and symptom-based troubleshooting for common issues.
Engine Repair:
Engine overhaul, cylinder head service, piston replacement, and crankshaft bearing service.
Transmission Overhaul:
Complete disassembly, inspection, and reassembly of transmission components.
Hydraulic System Repair:
Seal replacement, pump calibration, and valve assembly repair.
Electrical Diagnostics:
Wiring harness repair, sensor testing, and ECU programming/replacement procedures.
Brake System Service:
Brake caliper overhaul, master cylinder replacement, and bleeding procedures.
Pto Maintenance:
PTO clutch pack replacement and engagement troubleshooting.
Depth Of Coverage:
Comprehensive from basic maintenance to complete engine and transmission rebuilds.
Diagnostic Information:
Detailed diagnostic codes, explanations, and testing procedures.
Torque Specifications:
Precise torque values for critical fasteners across all systems.
Schematics:
Includes detailed electrical wiring diagrams and hydraulic schematics.
Engine Manufacturer:
Case IH (likely Shibaura or FPT Industrial engines depending on year/region)
Engine Model:
Specific engine model varies, but typically a 4-cylinder turbocharged diesel.
Engine Displacement:
Commonly around 3.9 Liters (238 cu. in.) or similar, specific to the variant.
Rated Horsepower:
Approximately 90 horsepower (67 kW) at rated engine speed.
Peak Torque:
Specifications vary, but generally designed for strong torque output in the lower RPM range.
Injection System:
Commonly mechanical or electronically controlled unit injectors or common rail systems.
Emissions Compliance:
Varies by market and year, potentially meeting Tier 3 or later emissions standards.
Transmission Type Standard:
Typically a 12-speed Forward / 12-speed Reverse (12Fx12R) mechanical synchromesh with power shuttle, or similar manual transmission.
Transmission Type Optional:
Optional powershift or creeper gear options may be available depending on the specific configuration.
Pto Speeds:
Standard 540/1000 RPM PTO, with optional ground speed PTO.
Gear Selection:
Manual lever and synchronizer engagement for smooth gear changes.
Wheelbase:
Approximate: 87 inches (2200 mm) - Varies by specific configuration.
Overall Length:
Approximate: 150-160 inches (3800-4060 mm) - Varies by configuration.
Overall Height:
Approximate: 95-100 inches (2413-2540 mm) to top of ROPS/cab - Varies by configuration.
Operating Weight:
Approximate: 6,000 - 7,000 lbs (2722 - 3175 kg) - Varies significantly with options and ballast.
Front Axle Capacity:
Designed to handle front-end loader loads and provide stability.
Rear Axle Capacity:
Engineered for heavy draft loads and transmission of power.
Engine Oil Change:
Typically every 250 hours or annually, refer to manual for exact specification.
Hydraulic Fluid Change:
Typically every 1000 hours or annually.
Fuel Filter Replacement:
Recommended at 500-hour intervals or as needed based on fuel quality.
Engine Oil Type:
API CI-4 or CH-4 rated diesel engine oil, typically SAE 15W-40 (refer to manual for specific viscosity and grade).
Hydraulic Fluid Type:
Case IH Hy-Tran Ultra or equivalent UTF (Universal Tractor Transmission Fluid) meeting ISO 11158 HD or JD J20C specifications.
Coolant Type:
Ethylene glycol-based antifreeze/coolant, typically a 50/50 mix with deionized water. Refer to manual for specific formulation.
Common Wear Items:
Clutch packs (if equipped with powershift), hydraulic pump wear, PTO engagement issues, and electrical connector corrosion.
Engine Performance Issues:
Potential for injector nozzle clogging or fuel pump wear leading to loss of power or hard starting.
Hydraulic System Problems:
Slow hydraulic response or leakage can indicate worn pump seals or control valve issues.
