Engine Mechanical:
Complete engine overhaul, internal components, timing, lubrication, cooling systems.
Fuel System:
Fuel delivery, injection system (MPI), fuel pump, injectors, fuel lines, emissions control.
Transmission Manual:
Manual transmission overhaul, clutch, shift mechanisms, gear ratios, fluid specifications.
Transmission Automatic:
Automatic transmission overhaul, torque converter, valve body, hydraulic controls, fluid types.
Drivetrain:
Front-wheel drive system, CV joints, differential, drive axles.
Suspension:
Front McPherson strut, rear independent suspension, springs, shock absorbers, bushings, alignment specifications.
Steering:
Power steering system, steering rack, tie rods, pump, fluid specifications.
Brakes:
Front disc brakes, rear drum brakes, hydraulic system, ABS (if equipped), rotor/pad specifications, bleeding procedures.
Electrical System:
12-volt system, battery, alternator, starter motor, ignition system, charging system, fuses, relays.
Lighting:
Headlights, taillights, interior lights, bulb types and replacement procedures.
HVAC:
Heating, ventilation, and air conditioning system, refrigerant types, diagnosis and repair.
Body Exterior:
Body panels, doors, hood, trunk, bumpers, trim, glass, seals.
Body Interior:
Dashboard, seating, upholstery, interior trim, sound deadening.
Chassis Frame:
Structural integrity, corrosion protection, frame components.
Diagnostic Troubleshooting:
Systematic diagnostic procedures, fault codes, common problems and solutions.
Scheduled Maintenance:
Oil changes, filter replacements, fluid checks, tune-ups, belt and hose inspections.
Component Removal Installation:
Step-by-step instructions for removing and installing all major components.
Rebuilding Overhaul:
Detailed procedures for rebuilding engines, transmissions, and other major assemblies.
Adjustments:
Carburetor adjustments (if applicable), ignition timing, valve lash, parking brake.
Specifications Data:
Torque specifications, clearances, fluid capacities, electrical values, pressures.
Wiring Diagrams:
Comprehensive electrical wiring diagrams for all vehicle systems.
Depth Of Coverage:
Comprehensive, suitable for professional mechanics and advanced DIY enthusiasts.
Diagnostic Tools:
Information on required special tools and diagnostic equipment.
Troubleshooting Guides:
Extensive troubleshooting charts and step-by-step diagnostic trees.
Oil Change Interval:
Every 3,000-5,000 miles or 6 months, whichever comes first.
Transmission Fluid Change Auto:
Every 30,000 miles or 24 months.
Transmission Fluid Change Manual:
Every 40,000-60,000 miles or 3-4 years.
Coolant Flush:
Every 24,000 miles or 24 months.
Engine Oil Type:
API SG/SF SAE 10W-30 or 10W-40 (check manual for climate specifics).
Engine Oil Capacity:
Approx. 4.5 US quarts (4.3 liters) with filter.
Coolant Type:
Ethylene Glycol based, 50/50 mix with distilled water.
Brake Fluid Type:
DOT 3 or DOT 4.
Common Wear Items:
CV joints, wheel bearings, alternator, fuel injectors, suspension bushings, turbocharger seals (on turbo models).
Electrical Gremlins:
Degradation of wiring insulation and connector issues can cause intermittent problems.
Rust Prone Areas:
Wheel wells, rocker panels, door bottoms, rear quarter panels.
