Engine Mechanical:
        
        
            Engine overhaul, assembly, disassembly, tuning, specific component repair (pistons, rings, valves, crankshaft, camshaft, etc.)
        
     
    
        
            Engine Management:
        
        
            Ignition system, fuel injection (if applicable to specific 1988 variants), emission control systems, sensors, actuators
        
     
    
        
            Cooling System:
        
        
            Radiator, water pump, thermostat, hoses, fan operation, system flushing and refill procedures
        
     
    
        
            Lubrication System:
        
        
            Oil pump, oil filter, oil cooler (if equipped), oil pressure checks, lubrication points
        
     
    
        
            Fuel System:
        
        
            Fuel tank, fuel pump, fuel lines, carburetor (for carbureted models) or fuel injection system diagnosis and repair, fuel filter replacement
        
     
    
        
            Transmission Manual:
        
        
            Clutch system, gearbox overhaul, gear shift mechanism, driveshafts, specific gear repair
        
     
    
        
            Transmission Automatic:
        
        
            If equipped, diagnosis, fluid checks, and basic repair procedures
        
     
    
        
            Drivetrain:
        
        
            Front-wheel drive system, differential, CV joints, wheel bearings
        
     
    
        
            Suspension Front:
        
        
            MacPherson struts, control arms, anti-roll bar, bushings, springs, shock absorbers
        
     
    
        
            Suspension Rear:
        
        
            Torsion beam suspension (common on AX), trailing arms, shock absorbers, bushings
        
     
    
        
            Steering System:
        
        
            Steering rack, tie rods, steering column, power steering system (if equipped), adjustments and repairs
        
     
    
        
            Braking System Front:
        
        
            Disc brake calipers, pads, rotors, brake fluid, bleeding procedures
        
     
    
        
            Braking System Rear:
        
        
            Drum brake components (shoes, drums, wheel cylinders), brake fluid, bleeding procedures
        
     
    
        
            Parking Brake:
        
        
            Cable adjustment and replacement, mechanism operation
        
     
    
        
            Electrical System Chassis:
        
        
            Battery, starter motor, alternator, lighting systems (headlights, taillights, turn signals), horn, wiper system
        
     
    
        
            Electrical System Interior:
        
        
            Instrument cluster, dashboard lights, interior lighting, power windows (if equipped), central locking (if equipped), radio wiring
        
     
    
        
            Body And Chassis:
        
        
            Body panel removal and installation, door mechanisms, hood, trunk lid, bumper repair, chassis component identification
        
     
    
        
            Heating And Ventilation:
        
        
            HVAC system diagnosis, blower motor, heater core, ventilation controls
        
     
    
        
            Air Conditioning:
        
        
            If equipped, basic system checks, component identification, refrigerant safety precautions
        
     
    
    
        
            Preventative Maintenance:
        
        
            Oil changes, filter replacements, fluid checks and changes, spark plug replacement, belt inspections and replacement
        
     
    
        
            Diagnostic Procedures:
        
        
            Systematic troubleshooting guides for common and uncommon faults, symptom-based diagnostics
        
     
    
        
            Repair Procedures:
        
        
            Step-by-step instructions for component removal, repair, and reinstallation for all major vehicle systems
        
     
    
        
            Rebuild Procedures:
        
        
            Detailed instructions for engine and transmission overhauls
        
     
    
        
            Electrical Troubleshooting:
        
        
            Diagnostic flowcharts, component testing procedures, wiring diagrams for tracing faults
        
     
    
        
            Torque Specifications:
        
        
            Precise torque values for all critical fasteners during assembly and repair
        
     
    
        
            Wheel Alignment:
        
        
            Specifications and adjustment procedures for front and rear wheel alignment
        
     
    
        
            Wiring Diagrams:
        
        
            Comprehensive, sectioned wiring diagrams for all electrical systems
        
     
    
    
        
            Depth Of Coverage:
        
        
            Comprehensive, suitable for professional technicians and advanced DIY enthusiasts
        
     
    
        
            Diagnostic Tools:
        
        
            Mentions necessary special tools and diagnostic equipment where applicable
        
     
    
        
            Illustrations And Diagrams:
        
        
            Detailed illustrations, drawings, photos, and exploded views for clarity
        
     
 
    
    
    
        
            Oil Change Interval:
        
        
            Typically every 7,500 to 10,000 miles (12,000 to 15,000 km) or 12 months, whichever comes first (refer to manual for precise interval).
        
     
    
        
            Timing Belt Replacement:
        
        
            Crucial for TU engines, typically recommended every 50,000 to 70,000 miles (80,000 to 110,000 km) or 5 years. Failure can cause severe engine damage.
        
     
    
    
        
            Engine Oil Type:
        
        
            API SF or SG, SAE 10W-40 or 15W-40 (viscosity dependent on ambient temperature, refer to manual for precise recommendations).
        
     
    
        
            Coolant Type:
        
        
            Ethylene glycol based antifreeze/coolant, typically a 50/50 mix with distilled water. Specific Citroën recommendations should be followed.
        
     
    
        
            Brake Fluid Type:
        
        
            DOT 3 or DOT 4 brake fluid. Regular flushing is recommended.
        
     
    
        
            Transmission Fluid Manual:
        
        
            GL-4 gear oil, SAE 75W-90 or 80W-90, with specific capacity detailed in the manual.
        
     
    
    
        
            Common Wear Items:
        
        
            Suspension bushings, exhaust system components, clutch wear, radiator hoses, and brake components are common wear items.
        
     
    
        
            Rust Tendency:
        
        
            As with many cars of this era, check for rust in common areas like wheel arches, sills, and floor pans.
        
     
    
        
            Electrical Gremlins:
        
        
            Older wiring harnesses can be prone to degradation, leading to intermittent electrical issues, which the manual's wiring diagrams will help diagnose.