🏷️ Basic Information

Make:

Daewoo

Model:

Fino

Year:

1995

Chassis Code:

Likely internal Daewoo designation, specific code not readily available without further documentation reference.

Engine Codes:

Varies by market and specific engine option. Common Daewoo engines of the era were based on Isuzu designs.

👋 Introduction

Vehicle Segment:

Subcompact/Compact hatchback or sedan, depending on body style offered for the Fino in 1995.

Target Audience:

Budget-conscious consumers seeking economical and reliable transportation.

Key Competitors Era:

Models from Suzuki (Swift/Cultus), Hyundai (Excel), Kia (Pride), and potentially small Japanese models from Honda, Toyota, and Nissan in certain markets.

Vehicle Highlights:

Affordability, fuel efficiency, practical interior, compact dimensions for urban driving.

📋 Manual Details

Market Coverage:

Global (specific regional variations may apply based on market introduction)

Vehicle Variants Covered:

All Models/Engines/Trim/Transmissions Types

Estimated Page Count:

Extensive, typically 500-1000+ pages for a comprehensive workshop manual.

Manual Type:

Workshop Repair and Service Manual

Language:

English (likely original language or primary translation)

Format:

PDF Download

📖 Manual Coverage

Engine Mechanical:

Engine assembly, disassembly, cylinder head, crankshaft, pistons, connecting rods, valve train, lubrication system, cooling system.

Fuel System:

Fuel delivery, fuel injectors, fuel pump, fuel filter, throttle body, fuel pressure regulator, emissions control (EVAP).

Ignition System:

Spark plugs, ignition coils, distributor (if applicable), ignition timing, crankshaft position sensor, camshaft position sensor.

Transmission Manual:

Clutch system, gearbox assembly, gear shift mechanism, drive shafts, differential.

Transmission Automatic:

Torque converter, planetary gear sets, valve body, transmission control unit (TCU), fluid pump, hydraulic circuits.

Braking System:

Brake fluid, master cylinder, brake lines, brake calipers, brake pads, brake discs/drums, parking brake, ABS system (if equipped).

Steering System:

Steering wheel, steering column, steering rack/box, power steering pump, power steering fluid, tie rod ends.

Suspension System:

Front suspension (struts, control arms, ball joints), rear suspension (shock absorbers, springs, trailing arms), wheel bearings.

Electrical System:

Battery, alternator, starter motor, fuses, relays, wiring diagrams, lighting system, horn.

Body And Chassis:

Body panels, doors, hood, trunk, bumpers, interior trim, chassis components, rust prevention.

HVAC System:

Air conditioning compressor, condenser, evaporator, blower motor, heater core, refrigerant, climate control panel.

Scheduled Maintenance:

Oil changes, filter replacements, fluid checks and top-offs, belt inspections and replacements, spark plug replacement.

Troubleshooting Diagnostics:

Fault code interpretation (OBD-I or early OBD-II), symptom-based diagnosis, component testing procedures.

Repair Procedures:

Step-by-step instructions for component removal, repair, and installation, including torque specifications and special tool requirements.

Engine Rebuild:

Complete engine overhaul instructions, including measurement specifications and tolerances for internal components.

Transmission Overhaul:

Detailed procedures for disassembling, inspecting, repairing, and reassembling both manual and automatic transmissions.

Electrical Diagnostics:

Schematic interpretation, testing of sensors, actuators, and control modules, wiring repair.

Suspension Alignment:

Specifications for wheel alignment angles (camber, caster, toe) and procedures for adjustment.

Brake System Service:

Brake bleeding procedures, rotor and pad replacement, caliper service, parking brake adjustment.

Depth Of Information:

Comprehensive. Covers basic maintenance to complex engine and transmission overhauls.

Diagnostic Level:

Advanced. Includes flow charts, resistance values, voltage checks, and component testing specifications.

Special Tools:

Lists required special tools for specific repair and diagnostic procedures.

📊 Manual Specifications

File Type:

PDF

Searchability:

Likely text-searchable if professionally scanned and converted.

Print Readability:

Designed for print, with clear diagrams and legible text.

Binding Type:

N/A (Digital PDF)

Paper Type:

N/A (Digital PDF)

⚙️ Engine Specifications

Engine Type:

Likely inline-3 or inline-4 cylinder, naturally aspirated gasoline engine.

Displacement:

Common displacements for Daewoo/Isuzu small engines of this era ranged from 0.8L to 1.5L. Specific Fino engine data would require confirmation.

Bore X Stroke:

Varies by specific engine. Manual will provide precise measurements.

Horsepower Range:

Typically 50-80 HP, depending on displacement and tuning.

Torque Range:

Typically 70-110 Nm, depending on displacement.

Fuel Delivery:

Likely multi-point fuel injection (MPI) for 1995 models, though some earlier or base variants might have had carburetion.

Fuel Type:

Unleaded Gasoline

Valve Actuation:

SOHC (Single Overhead Camshaft) or DOHC (Double Overhead Camshaft) depending on engine.

Emission Controls:

Catalytic converter, O2 sensors, EGR (Exhaust Gas Recirculation) system, EVAP (Evaporative Emission Control).

🔧 Transmission

Transmission Type:

Typically a 5-speed manual transmission.

Transmission Type:

3-speed or 4-speed automatic transmission likely offered as an option.

Clutch Type:

Dry, single-plate clutch (for manual transmission).

Manual Transmission Fluid:

GL-4 gear oil, viscosity typically 75W-90 or 80W-90. Specifics in manual.

Automatic Transmission Fluid:

Dexron II or Dexron III ATF. Specifics in manual.

📐 Dimensions

Length:

Approximately 3,600-3,800 mm (highly variable by body style).

Width:

Approximately 1,550-1,650 mm.

Height:

Approximately 1,350-1,450 mm.

Passenger Capacity:

4-5 occupants.

Curb Weight:

Approximately 750-950 kg.

Gross Vehicle Weight Rating:

Will be specified in manual based on load capacity.

🛡️ Safety Features

Crash Test Data:

Limited publicly available data for this specific model and year, common for vehicles of its era and market segment.

ABS:

Optional on higher trims, or market dependent.

Traction Control:

Unlikely to be standard or widely available for this model year.

Airbags:

Driver airbag likely standard on many trims; passenger airbag optional or not available.

Seatbelts:

Three-point inertia reel seatbelts for front occupants, two-point lap belts for rear occupants (typical).

💡 Technology Features

Audio System:

Basic AM/FM radio, possibly with a cassette player. Some models might have had a CD player option in later production.

Speakers:

Typically 2 or 4 speakers.

Cruise Control:

Rarely standard on this segment/era, likely an aftermarket or dealer-installed option at best.

Bluetooth:

Not available on original factory equipment for this model year.

Power Windows:

Optional on higher trims, manual crank windows standard on base models.

Central Locking:

Optional on higher trims, manual key operation standard.

🔧 Maintenance

Engine Oil Change:

Typically every 5,000-7,500 km or 6 months, whichever comes first.

Air Filter Replacement:

Every 20,000-30,000 km or as needed based on driving conditions.

Spark Plug Replacement:

Every 40,000-60,000 km, depending on plug type (copper, platinum).

Timing Belt Replacement:

Crucial! Typically every 80,000-100,000 km or 5 years. Failure can cause catastrophic engine damage. Manual will specify exact interval and part number.

Engine Oil Specification:

API SG or higher, viscosity typically 5W-30 or 10W-40 depending on climate. Manual will confirm.

Coolant Specification:

Ethylene Glycol based coolant, typically a 50/50 mix with distilled water. Manual will specify type and capacity.

Brake Fluid Specification:

DOT 3 or DOT 4 brake fluid. Manual will confirm exact type and bleeding procedure.

Common Problems:

Typical issues for vehicles of this era and segment can include: minor electrical gremlins, aging rubber components (hoses, belts, bushings), occasional ignition system issues, exhaust system corrosion, and potential carburetor or fuel injection system maintenance.

Maintenance Tips:

Regularly check and top-off fluids, inspect belts and hoses for wear, listen for unusual noises from the engine, transmission, and suspension.

📚 Vehicle History

Daewoo Overview:

Daewoo Motors was a South Korean manufacturer, known for producing a range of passenger cars, often based on licensed platforms from other manufacturers (e.g., GM, Isuzu, Fiat) before its acquisition by GM.

Fino Introduction:

The Fino was a small city car, a segment Daewoo actively participated in to capture budget-conscious buyers. It was designed to be economical to buy and run.

Platform Basis:

The Fino was often based on or heavily influenced by the Daewoo Tico, which in turn was based on the Suzuki Alto/Suzuki Cervo.

Production Period:

The Daewoo Fino was produced in the early to mid-1990s.

Manufacturing Locations:

Primarily South Korea, with potential assembly in other countries depending on market strategy.

🏆 Awards & Recognition

Industry Awards:

No significant, widely publicized industry awards or recognitions are typically associated with the Daewoo Fino model. Its market appeal was primarily based on affordability and utility.

Consumer Ratings:

Consumer satisfaction ratings for Daewoo vehicles of this period were generally moderate to low compared to established Japanese and European manufacturers.

Safety Certifications:

Compliance with local market safety and emissions regulations of the time.