Engine Mechanical:
Engine assembly, disassembly, cylinder head, pistons, crankshaft, camshafts, timing belt/chain, lubrication system, cooling system
Engine Fuel System:
Fuel injection (MPI), fuel pump, injectors, fuel filter, fuel tank, EVAP system
Engine Ignition System:
Ignition coils, spark plugs, distributor (if applicable), ECU control
Engine Emission Control:
Catalytic converter, oxygen sensors, EGR system (if equipped)
Transmission Manual:
Clutch operation, transmission disassembly/assembly, gear selection, internal components
Transmission Automatic:
Torque converter, planetary gear sets, valve body, electronic control (if applicable), fluid types
Drivetrain:
Drive shafts, CV joints, differential, wheel bearings
Suspension Front:
MacPherson struts, control arms, ball joints, bushings, springs, shock absorbers
Suspension Rear:
Torsion beam axle (typical), trailing arms, bushings, shock absorbers
Steering:
Steering column, rack and pinion, power steering system (pump, fluid, hoses)
Brakes Front:
Disc brakes, calipers, pads, rotors, brake lines
Brakes Rear:
Drum brakes or disc brakes (model dependent), wheel cylinders, shoes, drums, rotors, brake lines
Electrical System:
Battery, alternator, starter motor, wiring diagrams, fuses, relays
Lighting System:
Headlights, taillights, interior lights, bulb replacement
Instrument Panel:
Gauges, warning lights, warning chimes
HVAC System:
Heating, ventilation, air conditioning, blower motor, evaporator, condenser, refrigerant
Body And Chassis:
Body panels, doors, hood, trunk, interior trim, structural components
Body Control Modules:
Central locking, power windows, mirrors (if equipped)
Routine Maintenance:
Oil and filter changes, air filter replacement, spark plug replacement, fluid checks and top-ups, tire rotation
Troubleshooting:
Diagnostic procedures for common faults, symptom-based troubleshooting guides, error code interpretation (OBD-II where applicable)
Component Repair:
Detailed step-by-step repair instructions for all major systems, including torque specifications and special tool requirements
Electrical Diagnostics:
Wiring diagrams for troubleshooting electrical issues, component testing procedures
Body And Interior Repair:
Door panel removal, seat adjustment/removal, exterior trim replacement
Depth:
Comprehensive, covering basic maintenance to complete engine and transmission overhauls.
Diagnostic Capability:
Advanced diagnostics, including wiring schematics and component testing
Engine Oil Change:
Every 7,500 miles or 6 months, whichever comes first.
Service Intervals Filters
Oil Filter Replacement:
Replace with every oil change.
Air Filter Replacement:
Every 15,000 miles or 12 months.
Fuel Filter Replacement:
Every 30,000 miles.
Service Intervals Ignition
Spark Plug Replacement:
Every 30,000 miles (standard plugs) or 60,000 miles (if iridium/platinum plugs fitted).
Timing Belt Replacement:
Every 60,000 miles or 4 years (critical item, failure can cause severe engine damage).
Engine Oil Viscosity:
API SG/SH or ACEA A2/A3, SAE 5W-30 or 5W-40 recommended, SAE 10W-40 in warmer climates.
Engine Oil Capacity:
Approx. 3.7 - 4.3 liters (with filter change), depending on engine variant.
Coolant Type:
Ethylene glycol-based coolant, mixed 50/50 with distilled water. DEX-COOL or equivalent compatible.
Brake Fluid Type:
DOT 3 or DOT 4 brake fluid.
Transmission Fluid Manual:
API GL-4, SAE 75W-90 or 80W-90 gear oil.
Transmission Fluid Automatic:
Dexron III or equivalent automatic transmission fluid (ATF).
Engine Idling:
Idle air control (IAC) valve issues leading to rough idling or stalling.
Cooling System:
Radiator leaks, thermostat housing leaks, and fan motor failures.
Suspension:
Wear in control arm bushings and ball joints, leading to knocking noises and poor handling.
Electrical:
Corrosion on electrical connectors, intermittent issues with power windows, central locking, and dashboard lights.
Exhaust System:
Corrosion and leaks in the exhaust manifold and pipework.
