Target Audience:
DIY enthusiasts, independent repair shops, and technicians seeking detailed information for the Ford Laser KN/KQ models.
Value Proposition:
Provides the same level of detail and accuracy as official dealership service manuals, enabling users to perform a wide range of repairs and maintenance tasks effectively.
Illustration Style:
Features detailed exploded views, diagrams, and step-by-step illustrations for clear procedural guidance.
Printability:
Fully printable, allowing users to print specific sections or the entire manual for workshop use.
Engine Systems:
Engine mechanical, lubrication, fuel delivery (injection/carburetion as applicable), cooling, ignition, engine management, emission controls, and exhaust systems.
Drivetrain Systems:
Clutch assembly, manual and automatic transmission operation and repair, front and rear axle/differential components, driveshafts, CV joints.
Suspension Steering Brakes:
Front and rear suspension components (struts, shocks, control arms, bushings), steering gear and linkage, brake system hydraulics, disc and drum brake servicing, parking brake.
Body Electrical HVAC:
Body panel removal/installation, interior trim, lighting systems, power accessories, infotainment (basic), HVAC system diagnosis and repair, climate control.
Maintenance Procedures:
Scheduled maintenance tasks (oil changes, filter replacements, fluid checks/changes), tune-up procedures, inspection points.
Repair Procedures:
Detailed step-by-step repair instructions for all major vehicle systems, including engine component overhauls, transmission rebuilds, brake caliper replacement, suspension work, and electrical diagnostics.
Diagnostic Procedures:
Troubleshooting guides, symptom-based diagnostics, wiring diagrams for electrical system fault finding, specific fault code interpretation (if applicable).
Installation Procedures:
Procedures for removing and installing various components, including major mechanical assemblies and body parts.
Depth Of Information:
Comprehensive, covering routine maintenance to in-depth mechanical repairs and diagnostics. Includes exploded views and detailed diagrams for clarity.
Diagnostic Capabilities:
Advanced diagnostic information for engine management, fuel injection, and electrical systems, facilitating precise troubleshooting.
Engine 1 Variant:
2.0L Mazda FS
Engine 2 Variant:
1.6L Mazda ZM
Engine 3 Variant:
1.8L Mazda FP
Engine 2.0L Fs Horsepower Range:
Typically around 110-130 PS (81-96 kW), depending on specific tuning and market.
Engine 1.6L Zm Horsepower Range:
Typically around 90-100 PS (66-74 kW).
Engine 1.8L Fp Horsepower Range:
Typically around 115-125 PS (85-92 kW).
Fuel Delivery:
Electronic Fuel Injection (EFI) is standard across these engine variants for this model year range.
ECU Type:
ECU (Engine Control Unit) for managing fuel injection, ignition timing, and emissions.
Standard Transmission Type:
Manual Transmission (5-speed common)
Optional Transmission Type:
Automatic Transmission (likely 4-speed)
Transmission Fluid Type:
Refer to specific transmission type in manual (e.g., Dexron-III for AT, GL-4 for MT)
Crash Test Data:
Specific official ratings (e.g., NCAP) for this model may vary by region and year. The manual will cover safety system checks.
Active Safety:
ABS (Anti-lock Braking System) likely optional or standard on higher trims.
Passive Safety:
Seat belts, potentially front airbags depending on trim level and market.
Audio System:
Basic AM/FM radio with CD player or cassette deck was common. Speaker configurations varied by trim.
Driver Assistance Features:
Limited by modern standards; ABS was a key driver aid if equipped. No advanced electronic driver assistance systems expected.
Connectivity Options:
None beyond basic audio input (e.g., cassette adapter for MP3 players).
Oil Change Interval:
Typically every 5,000-10,000 km or 6-12 months, depending on driving conditions and oil type (consult manual for specifics).
Timing Belt Replacement:
Critical for FS and FP engines; usually every 80,000-100,000 km or 5-7 years. ZM engine might have a timing chain. Manual will specify.
Engine Oil Specification:
Typically API SG/SH or higher, SAE 10W-30 or 10W-40, depending on climate (refer to manual for exact API classification and viscosity).
Coolant Specification:
Ethylene glycol-based antifreeze, typically a 50/50 mix with distilled water. Specific color or type (e.g., traditional green or OAT) should be confirmed in the manual.
Brake Fluid Specification:
DOT 3 or DOT 4 brake fluid is standard for this era of vehicle.
Common Wear Items:
Ignition coils, spark plugs, engine mounts, suspension bushings, brake components, exhaust system parts.
Potential Engine Concerns:
Oil leaks, gasket failures, and potential issues related to ignition system components (e.g., distributor on older ZM variants, coils on FS/FP).
Ford Global Strategy:
The Ford Laser was a badge-engineered model, primarily based on Mazda platforms, reflecting Ford's global strategy of shared platforms and international collaboration during this period.
Laser Lineage:
The KN/KQ generation represents the third generation of the Ford Laser, evolving from earlier models and incorporating updated styling and technology.
Manufacturing Location:
Primarily manufactured in Japan and Australia for various global markets.
