Series:
10 Series, 30 Series
Model List:
2610, 2810, 3610, 3910, 4110, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 8210, 3230, 3430, 3930, 4630
Model Variations Covered:
Highway, Narrow, Vineyard, Orchard, Rice, and other specialized configurations
Target Audience:
Ford New Holland tractor owners, service technicians, mechanics, and agricultural equipment repair shops.
Value Proposition:
Provides essential, in-depth technical information for maintaining and repairing a wide range of Ford New Holland 10 and 30 Series tractors, empowering owners and technicians to perform tasks effectively and efficiently.
Diagrams And Illustrations:
Extensive use of detailed blown-up illustrations and diagrams to aid in understanding complex assemblies and procedures.
Parts Listing:
Detailed parts lists included, crucial for accurate part identification and ordering.
Download Convenience:
Instant download availability offers immediate access to critical service information.
Engine Systems:
Engine overhaul, fuel system (injection, pumps, injectors), lubrication, cooling system, air intake and exhaust systems, engine diagnostics, timing, and specifications.
Drivetrain Systems:
Clutch, transmission (gearbox, synchromesh, powershift where applicable), differential, final drives, rear axle, PTO (Power Take-Off) systems.
Hydraulic Systems:
Hydraulic pump, control valves, lift arms, remote hydraulic outlets, hydraulic fluid types, filtration, troubleshooting, and performance testing.
Electrical Systems:
Starting system, charging system (alternator, regulator), battery, lighting, ignition system (where applicable), wiring diagrams, diagnostic procedures, and component testing.
Chassis And Steering:
Front axle, steering system (hydrostatic steering components), braking system (mechanical and hydraulic), suspension components, wheel and tire specifications.
Body And Operator Station:
Cab construction, fenders, sheet metal, operator controls, seat adjustments, operator comfort features.
Maintenance Procedures:
Routine servicing, fluid changes, filter replacements, lubrication points, greasing intervals, safety checks.
Repair Procedures:
Step-by-step instructions for component removal, disassembly, inspection, repair, reassembly, and installation.
Troubleshooting Guides:
Systematic diagnostic approaches for identifying and resolving common and uncommon faults, including symptom-based troubleshooting charts.
Technical Specifications And Data:
Torque values for critical fasteners, engine performance curves, fluid capacities, electrical system resistance values, and dimensional data.
Special Tool Requirements:
Identification of specific tools or jigs required for certain maintenance or repair operations.
Depth Of Information:
Comprehensive, covering everything from basic user maintenance to complete engine and transmission overhauls, including electrical system diagnostics and hydraulic component repair.
Engine Families:
Likely includes engines from Ford's 3-cylinder and 4-cylinder diesel series, such as the 3.9L (233 cu in) and 4.2L (256 cu in) naturally aspirated and turbocharged variants.
Horsepower Range:
Varies by model, generally from approximately 40 HP for smaller models to over 100 HP for larger models in these series.
Torque Specifications:
Detailed torque specifications for critical engine components (e.g., cylinder head bolts, main bearing caps) will be present.
Injection System:
Typically utilizes Lucas-CAV or similar inline or rotary fuel injection pumps. Manual will cover pump timing, calibration, and injector servicing.
Oil Type And Capacity:
Specific API service classifications for engine oil (e.g., CD, CE, CF-4) and refill capacities for different engine models will be detailed.
Gearbox Types:
Likely covers various transmissions including 8-speed, 12-speed (e.g., 6 forward + 2 reverse with creeper or high-low), and potentially 16-speed configurations. Includes options for shuttle shift (Forward/Reverse lever).
Powershift Options:
Some higher-end models may have offered a Powershift transmission (e.g., 16-speed PowerShift), and this manual would detail its operation and servicing.
Pto Systems:
Coverage of live PTO, ground-speed PTO, and independent PTO configurations, including engagement mechanisms and servicing.
Transmission Oil Type:
Specific transmission fluid types (e.g., Ford/New Holland M2C134-D or equivalent UTTO) and refill capacities for various gearbox and hydraulic reservoir configurations.
Overall Length:
Variable by model and configuration (e.g., narrow vs. standard). Will be detailed for specific models.
Wheelbase:
Variable by model and configuration. Specific wheelbase measurements will be included.
Operating Weight:
Range will vary significantly based on model and fitted options (e.g., cab, front weights). Manual will provide specific figures.
Towing Capacity:
Information on hitch classifications and recommended towing weights will likely be present.
Operator Station Safety:
Information on ROPS (Roll-Over Protective Structure) and FOPS (Falling Object Protective Structure) compliance may be included, along with safe operating practices.
Braking System Details:
Detailed information on hydraulic and mechanical braking system components, adjustments, and maintenance for safe operation.
Operator Controls Layout:
Clear diagrams and descriptions of control placement for intuitive and safe operation.
Operator Interface:
Basic analog gauges for engine RPM, oil pressure, coolant temperature, fuel level, and hour meter. Controls are mechanical or electro-hydraulic.
Pto Engagement Systems:
Mechanical or electro-hydraulic PTO engagement systems, with detailed operational and maintenance instructions.
Lighting Systems:
Covers standard 12V electrical systems for headlights, taillights, and work lights. Wiring diagrams are a key feature.
Engine Oil Change:
Typically every 250-500 operating hours, or annually, depending on operating conditions and oil analysis. Manual will specify exact intervals.
Transmission Hydraulic Filter:
Recommended replacement every 500-1000 operating hours or annually. Manual will provide precise intervals and part numbers.
Fuel Filter Replacement:
Scheduled replacement often tied to engine oil changes or as needed based on fuel quality and operating hours.
Engine Coolant Type:
Typically a heavy-duty ethylene glycol based coolant meeting specific heavy equipment standards. Manual will specify the correct type and freeze protection level.
Hydraulic Fluid Specification:
Ford/New Holland specification M2C134-D or equivalent Universal Tractor Transmission Oil (UTTO) is common for the combined transmission, hydraulic, and wet brake system.
Hydraulic System Leaks:
Common issues can include worn hydraulic pump seals, leaky cylinder seals, and cracked hydraulic lines, all of which are detailed for diagnosis and repair.
Transmission Wear:
Wear on synchronizers, gears, and clutch packs in manual transmissions, or wear within Powershift units, will be covered for repair.
Electrical Connection Corrosion:
Corrosion in connectors and wiring harnesses can lead to intermittent electrical issues, with diagnostic procedures for resolution provided.
Ford Tractor Division:
This manual covers tractors produced during the era when Ford's agricultural division was a significant global player, before the transition to New Holland.
10 Series Development:
The 10 Series (e.g., 3610, 4610, 5610) represented a significant evolution of Ford's established tractor platforms, incorporating improved ergonomics, hydraulics, and engine options from the preceding 30/40/50 series.
30 Series Development:
The 30 Series (e.g., 3230, 3430, 3930) represents a later generation, often featuring updated styling, more powerful engines, and enhanced transmission options, aligning with the New Holland branding.
Approximate Production Era:
10 Series models typically produced from the late 1970s through the 1980s. 30 Series models generally from the late 1980s through the 1990s.
