Market Position:
A critical resource for owners of the 2010 Husqvarna TE310, enabling DIY maintenance and repair to save on professional labor costs and enhance vehicle understanding.
Competitive Analysis:
This is an 'Actual Genuine Repair Service Factory Manual,' differentiating it from less comprehensive or third-party publications. It provides the depth and accuracy expected from OEM documentation.
Key Features:
Official factory content, comprehensive coverage, detailed illustrations and diagrams, step-by-step instructions, troubleshooting guides, diagnostic techniques, printable format, cost savings on labor.
Labor Cost Savings:
Potential to save $50-$60 per hour on shop labor costs by performing servicing and repairs independently.
Coverage Areas:
General Information, Fuel System, Cooling System, Engine Top End, Clutch, Engine Lubrication System, Engine Removal/Installation, Crankshaft/Transmission, Wheels/Tires, Final Drive, Brakes, Suspension, Steering, Frame, Electrical System, Appendix, Troubleshooting, Diagnostics, Maintenance, Repair, Tuning.
Page Count:
Hundreds of pages (exact count not specified, but indicates comprehensive coverage).
Manual Type:
Factory Service Repair Manual
Delivery Method:
Instant download link provided on the checkout page after payment.
Software Requirements:
Adobe PDF Reader required for viewing and printing.
Systems Covered:
Engine (Top End, Lubrication, Removal/Installation, Crankshaft, Transmission), Fuel System, Cooling System, Clutch, Electrical System, Fuel System, Brakes, Suspension, Steering, Frame, Wheels/Tires, Final Drive.
Procedures Included:
Maintenance, Routine Service, Diagnosis of Fault Symptoms, Repair Procedures (step-by-step), Troubleshooting, Testing of Components, Wiring Diagram Tracing, Engine Management System Analysis, Rebuilds, Refurbishments, Restorations, Tuning.
Engine Rebuild:
Detailed procedures for engine rebuilds, including component tolerances and assembly instructions.
Technical Depth:
Comprehensive, covering everything from fundamental maintenance to advanced diagnostics and complete rebuilds, mirroring the knowledge of factory-trained technicians.
Electrical System Details
Wiring Diagrams:
Detailed and verifiable wiring diagrams are included to trace the electrical system.
Engine Management Systems:
Analysis and understanding of different engine management systems covered, including EFI parameters.
Troubleshooting Methodology:
Advanced troubleshooting guide to diagnose and correct problems using techniques employed by professional mechanics.
Testing Techniques:
Includes 'secret techniques used by top mechanics' for testing suspected parts.
Repair Procedure Enhancements
Instructional Details:
Detailed substeps, notes, cautions, warnings, numbered instructions, and bold figure numbers for clear guidance.
Illustrations And Diagrams:
Detailed illustrations, drawings, photos, and enlarged insets to aid in part identification and procedure understanding.
Table Of Contents:
Numbered table of contents for easy and fast information retrieval.
Print Quality:
High Resolution, Printable (entire manual or specific pages).
Binding Type:
Digital Download (printable into any desired binding).
Paper Type:
Not Applicable (Digital/Printable PDF).
Search Functionality:
Yes, the PDF format allows for easy searching of specific terms or procedures.
Computer Skill Requirement:
No advanced computer skills required; easy to use for viewing and printing.
Engine Type:
Single-cylinder, 4-stroke (typical for TE310, though specific configuration requires manual reference).
Engine Displacement:
302.4 cc (commonly associated with the TE310 model year).
Bore X Stroke:
Refer to manual for exact specifications (e.g., 76 mm x 66 mm is common for this era).
Compression Ratio:
Refer to manual for exact specifications (e.g., 12.0:1 is typical).
Fuel Delivery:
Fuel Injection (EFI) is standard for this model year.
Ignition System:
Electronic Ignition (refer to manual for specific timing and component details).
Engine Lubrication System
Oil Type:
Refer to manual for specific viscosity (e.g., SAE 10W-50 or 15W-50 JASO MA).
Oil Capacity:
Refer to manual for exact capacity (typically around 1.0-1.5 liters).
Cooling Method:
Liquid-cooled (typical for TE models).
Drive Type:
O-ring sealed chain
Dry Weight:
Approximately 105 kg (231 lbs) - actual may vary, refer to manual for precise figure.
Seat Height:
Approximately 940 mm (37 in) - actual may vary, refer to manual for precise figure.
Wheelbase:
Approximately 1465 mm (57.7 in) - actual may vary, refer to manual for precise figure.
Frame Type:
Chromoly steel trellis frame (typical for Husqvarna).
Front Suspension:
Upside-down telescopic forks, Marzocchi (typical for TE310).
Rear Suspension:
Monoshock with progressive linkage, Sachs (typical for TE310).
Front Brake:
Hydraulic disc brake, Brembo calipers (typical).
Rear Brake:
Hydraulic disc brake, Brembo calipers (typical).
Front Wheel Size:
21 inches
Rear Wheel Size:
18 inches
Safety Ratings:
N/A for motorcycles in standard automotive safety rating contexts. Manual covers safe operating procedures.
Active Safety Features:
Disc Brakes (front and rear), Suspension systems designed for stability.
Passive Safety Features:
Chassis design, rider protection gear (not part of the vehicle itself but emphasized by the manual for safe operation).
Infotainment System:
Basic digital display for speed, RPM, odometer, trip meter, and indicator lights. No advanced infotainment features typical of cars.
Driver Assistance Features:
N/A for this motorcycle model.
Connectivity Features:
N/A for this motorcycle model.
Engine Oil Change:
Refer to manual for recommended intervals (e.g., every 10-15 hours of use or annually).
Air Filter Cleaning:
Refer to manual for recommended intervals (frequently, depending on riding conditions).
Spark Plug Replacement:
Refer to manual for recommended intervals.
Engine Oil Viscosity:
Refer to manual for specific grade (e.g., SAE 10W-50 or 15W-50 JASO MA).
Coolant Type:
Refer to manual for specific type and mixture (typically ethylene glycol based).
Brake Fluid Type:
Refer to manual for specific DOT rating (e.g., DOT 4).
Fork Oil Type:
Refer to manual for specific grade and quantity.
Common Issues:
While not detailed in the product description, typical issues for this model year might include fuel pump reliability, starter motor issues, or wear on specific engine components depending on maintenance history. The manual would detail specific diagnostic steps for these.
Tuning Guidance:
Provides guidance on all service, maintenance, repairs, and tuning procedures.
Brand Heritage:
Husqvarna Motorcycles has a long and rich history dating back to 1903, initially as a manufacturer of sewing machines and later becoming a prominent name in off-road and enduro motorcycles.
Model Evolution:
The TE series represents Husqvarna's enduro lineage. The TE310, as part of this line, has seen continuous development focusing on performance, handling, and reliability for competitive off-road use.
Engine Development:
The TE310's engine often evolved from earlier designs, focusing on increased power and torque delivery suitable for enduro competition.
Production Origin:
Italy (Historically associated with Husqvarna production during this period).
