Engine:
Complete engine overhaul, including disassembly, inspection, repair, and reassembly of all internal components (pistons, rings, valves, camshafts, crankshaft, etc.)
Fuel System:
Fuel injection system (throttle bodies, injectors, fuel pump, pressure regulator), fuel tank, lines, and filters
Ignition System:
Ignition coils, spark plugs, ECU control, wiring diagrams
Cooling System:
Radiator, cooling fan, coolant pump, thermostat, hoses, and fluid specifications
Exhaust System:
Exhaust pipes, catalytic converter, mufflers, exhaust valves, and gasket replacement
Transmission:
Gearbox inspection, repair, clutch assembly, shift mechanism, and transmission fluid specifications
Clutch:
Hydraulic clutch system, clutch plates, springs, master and slave cylinders
Chassis:
Frame inspection, alignment, swingarm, linkages, and bearings
Suspension Front:
WP 4860 DCC front forks: disassembly, inspection, seal replacement, oil type and level, spring preload adjustment, damping settings
Suspension Rear:
WP Monoshock rear suspension: linkage maintenance, shock absorber service, spring replacement, damping and preload adjustment
Brakes Front:
Brembo radial-mount calipers, brake discs, master cylinders, brake lines, fluid type and bleeding procedures
Brakes Rear:
Brembo rear caliper, brake disc, master cylinder, brake lines, fluid type and bleeding procedures
Wheels Tires:
Wheel bearing maintenance, tire mounting and balancing, recommended tire pressures
Electrical System:
Wiring diagrams, battery, alternator, starter motor, lighting system, fuses, relays, ECU, sensors
Instrumentation:
Dashboard display, warning lights, sensor calibration
Bodywork:
Fairing removal and installation, seat, fuel tank, tail section, and minor body panel repairs
Maintenance:
Scheduled maintenance, oil changes, filter replacements, chain adjustment, lubrication, brake fluid flush, coolant replacement
Troubleshooting:
Diagnostic procedures for common issues, error codes, symptom-based troubleshooting guides
Repair:
Detailed step-by-step instructions for component repair and replacement across all systems
Rebuild:
Full engine and transmission rebuild procedures with torque specifications and clearances
Diagnostics:
Information on diagnostic connectors, tools, and procedures, including sensor testing
Torque Specs:
Comprehensive list of torque specifications for all critical fasteners
Wiring Diagrams:
Full color, detailed electrical wiring diagrams for all vehicle systems
Depth:
Extensive, covering everything from basic maintenance to complete engine teardowns and complex electrical diagnostics.
Engine Type:
Liquid-cooled, 75° V-twin four-stroke engine
Displacement:
1195 cc (1190 cc for base RC8)
Bore X Stroke:
103 x 71 mm
Valve Train:
DOHC, 4 valves per cylinder, chain driven
Compression Ratio:
13.5:1
Horsepower:
Approx. 170 HP (125 kW) @ 10,000 rpm (claimed)
Torque:
Approx. 120 Nm (88.5 lb-ft) @ 8,000 rpm (claimed)
Fuel Delivery:
Keihin electronic fuel injection (EFI), Ride-by-Wire throttle
Fuel Type:
Unleaded premium gasoline (min. 95 RON/91 AKI)
Oil Type:
Semi-synthetic or fully synthetic motorcycle oil, SAE 10W-50 or 15W-50
Oil Capacity:
Approx. 3.4 Liters (3.6 US qt) with filter change
Oil Change Interval:
Every 7,500 km (4,600 miles) or 12 months
Major Service Interval:
15,000 km (9,300 miles) for valve clearance check, spark plugs, and air filter
Brake Fluid Change:
Every 2 years or as needed based on inspection
Coolant Change:
Every 2 years or 40,000 km (25,000 miles)
Fork Oil Type:
WP Suspension Fluid (e.g., Motorex Fork Oil Light 5W or equivalent)
Fork Oil Level:
Refer to manual for precise level (typically measured from top of stanchion with spring removed)
Brake Fluid Type:
DOT 4 or DOT 5.1
Common Issues:
Some owners report occasional minor electrical gremlins, clutch slave cylinder leaks, and premature wear on some body panels due to heat. The manual addresses common diagnostic procedures.
