Target User:
Professional mechanics, service technicians, fleet maintenance managers, and experienced DIY users of Linde forklifts.
Value Proposition:
Provides complete factory-level repair and maintenance data, offering significant cost savings over dealer-exclusive service information.
Diagrams And Illustrations:
Hundreds of detailed photos and exploded diagrams crucial for accurate component identification and assembly.
Completeness:
Full factory service manual covering all repair and maintenance aspects, not a condensed or limited version.
Diagram Types:
Includes exploded views for part identification, schematic diagrams for hydraulic and electrical systems, and assembly diagrams.
Primary Coverage:
All repairs, servicing, and troubleshooting procedures for Linde 391 Series IC-engined forklift trucks.
Estimated Pages:
Hundreds (detailed to indicate significant depth)
Type:
Factory Service Repair Workshop Manual
Language:
English (implied by product description phrasing and common workshop manual languages)
Powertrain:
Engine maintenance, diagnostics, repair; transmission system service and overhaul; drive axle and differential assembly.
Hydraulic System:
Hydraulic pump service, control valve repair, cylinder overhaul, hose and fitting specifications, troubleshooting hydraulic issues.
Electrical System:
Wiring diagrams, component testing, starter and charging system, ignition system (if applicable to IC engines), lighting, control modules.
Chassis And Body:
Frame inspection and repair, mast assembly, steering system, braking system, operator cabin ergonomics and component replacement.
Mast And Carriage:
Detailed service and repair for mast assembly, lift chains, carriage, fork tines, and side shift mechanisms.
Steering System:
Service and repair of the power steering system, including pump, steering axle, and linkages.
Counterweight And Frame:
Details on counterweight mounting, frame integrity checks, and potential repairs.
Routine Maintenance:
Lubrication schedules, fluid level checks and changes, filter replacements, battery maintenance, general inspection procedures.
Troubleshooting:
Systematic diagnostic procedures for common and complex issues, fault code interpretation (if applicable), component-specific testing.
Repair And Rebuild:
Step-by-step instructions for component disassembly, repair, reassembly, and adjustment for all major systems.
Special Tools:
Identification and usage instructions for specialized tools required for specific repair or maintenance tasks.
Calibration:
Procedures for calibrating sensors, hydraulic controls, and engine management systems to ensure optimal performance.
Component Replacement:
Step-by-step guides for replacing major components such as engines, transmissions, hydraulic pumps, masts, and drive axles.
Depth:
Comprehensive, from basic maintenance to complete engine and transmission overhauls, including detailed diagnostic procedures.
Diagnostics And Troubleshooting Charts:
Likely includes comprehensive diagnostic flowcharts based on symptoms and fault codes.
Searchability:
Searchable text content (typical for professional PDF manuals).
Printability:
Printable pages (single or entire manual).
Binding:
N/A (Digital download, printing options are user-dependent)
Paper Quality:
N/A (Digital download, printing quality depends on user's printer and paper)
Usage License:
Lifetime use, no expiry, multi-device compatibility.
Platform Compatibility:
Fully compatible with Windows and macOS computers.
Engine Type:
Internal Combustion (IC-Engined), specific engine models likely depend on sub-variant (e.g., LPG, Diesel, Gasoline, details within manual).
Performance Metrics:
Specifications for horsepower, torque, and operating parameters will be detailed within the manual for each specific engine option used in the H14-H20 series.
Fuel Type:
Likely Gasoline, LPG, or Diesel depending on specific forklift configuration. Manual will detail fuel system components, diagnostics, and repair.
Cooling Method:
Liquid-cooled (typical for industrial IC engines), manual will cover radiator, coolant, fan, and pump service.
Oil Type And Capacity:
Specific oil viscosity grades (e.g., API CF, ACEA E7) and capacities for engine oil will be provided. (Actual values would be in the manual).
Ignition Details:
If gasoline, detailed coverage of spark plugs, ignition coils, and timing will be included.
Transmission Type:
Hydrostatic transmission (common in Linde forklifts for precise control and efficiency). Manual will detail its operation, service, and repair.
Optional Transmissions:
Typically hydrostatic is standard; manual will confirm if any other options exist for these models.
Transmission Fluid:
Specific type and capacity for hydrostatic transmission fluid will be detailed, along with change intervals and filter part numbers.
Control System:
Details on electronic and hydraulic control systems for the transmission, including adjustment and calibration.
Lift Capacities:
H14 (1.4t), H16 (1.6t), H18 (1.8t), H20 (2.0t). Exact dimensions (L, W, H) and mast height ranges will be in the manual.
Operating Weight:
Operating weights for each model variant will be specified, crucial for load balancing and transportation.
Load Center Specifications:
Standard load center distances (e.g., 500mm, 600mm) for which capacities are rated will be detailed.
Tire Specifications:
Recommended tire types (solid, pneumatic) and sizes for front and rear axles will be provided.
Safety Standards:
Compliance with relevant industry safety standards (e.g., ANSI/ITSDF, EN ISO standards) will be implied by the factory manual's content.
Braking System Details:
Detailed specifications for the braking system (hydraulic, disc/drum), including adjustment and maintenance procedures.
Operator Protection:
Information on overhead guards, seatbelts, and other operator safety features will be covered.
Load Chart Interpretation:
Guidance on understanding and utilizing load charts to ensure safe operation.
Instrument Panel And Controls:
Details on dashboard indicators, warning lights, and control lever functions for operator interface.
Operator Feedback Systems:
Information on load indication systems, stability assistance (if equipped), and other operator aids.
Diagnostic Tools And Interfaces:
Procedures for using diagnostic tools or methods to read error codes and monitor system parameters.
Preventive Maintenance Schedule:
Detailed hourly, daily, weekly, monthly, and annual maintenance checklists and schedules will be provided for all key systems.
Hydraulic Fluid:
Specific ISO VG viscosity grade and brand recommendations for hydraulic fluid will be listed. (e.g., ISO VG 46).
Engine Coolant:
Type and mixture ratio for engine coolant (e.g., ethylene glycol-based) will be specified, along with freezing point and capacity.
Lubricant Specifications:
Grease types and locations for chassis lubrication points will be detailed using industry-standard classifications (e.g., NLGI 2 lithium complex grease).
Engine Oil Specifications:
Likely API SN/SP or equivalent for gasoline engines, or API CK-4/CJ-4 for diesel. Precise viscosity and API service classification will be provided.
Common Wear Points:
The manual will likely highlight areas prone to wear, such as mast rollers, tilt cylinder seals, and hydrostatic drive components, with guidance on inspection and replacement.
Filter Part Numbers:
Specific part numbers for engine oil filters, fuel filters, hydraulic filters, and transmission filters will be provided for easy procurement.
Linde Forklift Legacy:
Linde is a globally recognized leader in material handling equipment, known for robust engineering and innovative designs, particularly in hydrostatic drive systems.
391 Series Development:
The 391 Series represents Linde's commitment to efficient and reliable IC-powered counterbalance forklifts, building on decades of experience in this sector. Specific model updates would be detailed within the manual if applicable.
Manufacturing Locations:
Linde material handling equipment is manufactured in various global locations, with specific plant information likely not detailed in a service manual but implied by its factory origin.
