Engine:
Detailed diagnostics, repair, overhaul procedures for all engine variants, including component testing, timing, emissions, cooling, lubrication.
Transmission Manual:
Service, repair, and overhaul for manual transmissions (e.g., KM200, KM201), including clutch system, shift linkage, and internal components.
Transmission Automatic:
Service, repair, and overhaul for automatic transmissions (e.g., V4A51), including torque converter, valve body, electronic controls, fluid types, and capacities.
Drivetrain 4Wd:
Comprehensive coverage of the Super Select 4WD system, transfer case, front and rear differentials, drive shafts, CV joints, and hubs.
Suspension Steering:
Front independent suspension (double wishbone) and rear multi-link suspension, shock absorbers, springs, bushings, power steering system, and steering gear.
Brakes:
Front and rear brake systems (disc/drum or disc/disc), ABS, brake fluid specifications, bleeding procedures, component replacement (pads, rotors, calipers, lines).
Electrical Lighting:
Wiring diagrams, lighting system (headlights, taillights, interior), exterior lighting, bulb types and specifications.
Electrical Accessories:
Power windows, power locks, mirrors, wipers, horn, interior convenience features, fuse and relay identification.
Body Exterior:
Body panel removal and installation, doors, hood, tailgate, bumpers, glass replacement, trim components.
Body Interior:
Dashboard removal, seat removal and installation, interior trim panels, carpeting, headliner.
HVAC:
Heating, Ventilation, and Air Conditioning (HVAC) system diagnostics, refrigerant handling, component replacement (compressor, evaporator, heater core).
Fuel System:
Fuel pump, fuel injectors, fuel filter, fuel lines, fuel tank, emissions control system (EVAP).
Exhaust System:
Exhaust manifolds, catalytic converter, mufflers, pipes, hangers, oxygen sensors.
Cooling System:
Radiator, coolant hoses, water pump, thermostat, fan system (mechanical/electric), coolant types and capacities.
Lubrication System:
Oil pump, oil filter, oil pan, oil galleries, oil specifications.
Engine Control System:
ECU (Engine Control Unit), sensors (crankshaft, camshaft, O2, MAP, MAF, TPS), actuators, diagnostic trouble codes (DTCs) and troubleshooting.
Air Conditioning System:
Refrigerant circuits, compressor operation, condenser, receiver drier, expansion valve, climate control panel diagnostics.
Basic Maintenance:
Oil changes, filter replacements, fluid checks and top-offs, tire rotation, spark plug replacement, air filter replacement.
Engine Repair:
Head gasket replacement, piston ring replacement, bearing replacement, timing belt/chain service, valve adjustment.
Transmission Repair:
Clutch replacement, transmission fluid and filter change, seal replacement, valve body service, complete transmission overhaul.
Brake System Repair:
Brake pad and rotor replacement, brake caliper service, brake line replacement, brake bleeding, ABS sensor replacement.
Suspension Component Replacement:
Shock absorber and strut replacement, ball joint replacement, tie rod end replacement, control arm bushing replacement.
Electrical Diagnostics:
Troubleshooting electrical faults, diagnosing sensor issues, circuit testing, using multimeters and oscilloscopes.
Body Panel Repair Replacement:
Panel alignment, dent repair, door hinge adjustment, tailgate and door glass replacement.
Diagnostic Trouble Codes:
Listing of DTCs, diagnostic procedures for each code, and recommended repair steps.
Wheel Alignment:
Specifications for camber, caster, and toe angles, adjustment procedures.
Climate Control Service:
HVAC system recharging, leak testing, component replacement (compressor, condenser, blower motor).
Depth:
Comprehensive: Covers everything from basic maintenance and fluid checks to complete engine and transmission overhauls, advanced electrical diagnostics, and bodywork.
Diagnostic Capability:
Advanced diagnostic procedures, including use of scan tools, identifying electrical issues, and interpreting sensor data.
Torque Specifications:
Detailed torque specifications for all critical fasteners across all major components.
Wiring Diagrams:
Full vehicle electrical wiring diagrams with component locations and harness routing.
Troubleshooting Charts:
Symptom-based troubleshooting flowcharts for common problems.
Component Removal Installation:
Step-by-step instructions with illustrations for removing and installing virtually every component on the vehicle.
Engine Oil Change:
Every 5,000-7,500 miles (8,000-12,000 km) or 6-12 months, whichever comes first (refer to manual for specific interval and oil type).
Engine Air Filter Replacement:
Every 15,000-30,000 miles (24,000-48,000 km) or as needed based on driving conditions (refer to manual).
Spark Plug Replacement:
Every 30,000-60,000 miles (48,000-96,000 km) depending on spark plug type (e.g., platinum or iridium).
Timing Belt Replacement:
Critical for 6G72 V6 engine. Typically every 60,000-105,000 miles (96,000-168,000 km) or 5-7 years. Manual will specify exact interval and should include water pump replacement.
Engine Oil:
API SN/SP, ILSAC GF-5 or higher. Viscosity: SAE 5W-30 or 10W-30 recommended (check manual for precise spec).
Transmission Fluid Manual:
GL-4 or GL-5 gear oil, SAE 75W-90 recommended. Capacity approx. 2.5 liters.
Transmission Fluid Automatic:
Genuine Mitsubishi DIA QUEEN ATF SP-III or equivalent. Capacity approx. 7.5-8.5 liters (for total fill).
Coolant:
Mitsubishi Super Long Life Coolant (SLLC) or equivalent (Ethylene Glycol based, OAT type). Capacity approx. 8.5-9.5 liters.
Brake Fluid:
DOT 3 or DOT 4 brake fluid.
Power Steering Fluid:
Genuine Mitsubishi Power Steering Fluid or ATF Dexron-III compatible. Capacity approx. 1.0-1.2 liters.
Timing Belt:
Failure to replace the timing belt at recommended intervals can lead to catastrophic engine damage (interference engine).
Exhaust Manifold Cracks:
Some V6 engines can develop cracks in the exhaust manifolds, leading to exhaust leaks and ticking noises.
Transfer Case Actuator Issues:
Early models of the Super Select 4WD system can experience issues with the electronic actuator, especially with infrequent use.
Heater Core Leaks:
Heater cores can sometimes develop leaks over time, leading to coolant loss and fogging of the windshield.
Suspension Bushings:
Wear and tear on suspension bushings (control arms, sway bars) can lead to clunking noises and reduced handling precision.