Systems Covered:
Travel Drive, Steering, Brakes, Running Gear, Lifting Device, Cylinder, Electrical System, Hydraulic System, Swivel Shift Fork, PLC, Display, Troubleshooting
Page Count:
Unknown (Detailed page count not provided in product information)
Manual Type:
Service Repair Workshop Manual
Powertrain:
Detailed coverage of the travel drive system, including components and operation.
Steering System:
Comprehensive information on the steering mechanism, adjustments, and repair procedures.
Braking System:
In-depth analysis of brake system components, maintenance, and troubleshooting for optimal safety.
Running Gear:
Covers chassis, axles, suspension (if applicable to forklift design), and wheel assemblies.
Lifting Device:
Extensive details on the mast, carriage, forks, hydraulic cylinders, and associated mechanisms.
Hydraulic System:
Detailed diagrams, component identification, pressure specifications, and repair procedures for the entire hydraulic circuit.
Electrical System:
Wiring diagrams, component testing, diagnostic procedures, and repair for all electrical systems, including lighting and controls.
Control Systems:
Information on the PLC (Programmable Logic Controller) and display unit, including programming basics and troubleshooting for electronic controls.
Swivel Shift Fork:
Specific technical information and repair procedures for the swivel shift fork mechanism, a specialized component.
Maintenance:
Routine checks, lubrication schedules, filter replacements, and preventive maintenance procedures to ensure longevity.
Troubleshooting:
Systematic diagnostic steps and fault finding for common and complex issues across all covered systems.
Repair:
Step-by-step repair instructions for component replacement, adjustments, and system overhauls.
Diagnostics:
Guidance on identifying the root cause of malfunctions using diagnostic techniques and tools.
Component Identification:
The manual provides clear identification of all major components within each system, aiding in accurate diagnosis and part replacement.
Adjustment Procedures:
Specific procedures for adjusting brakes, steering, lifting mechanisms, and control systems are covered to ensure optimal performance and safety.
Replacement Procedures:
Step-by-step instructions for replacing worn or damaged components, such as hydraulic hoses, cylinder seals, or drive motor parts.
Depth:
Comprehensive coverage suitable for both novice owners and professional technicians, encompassing basic to advanced repair and diagnostic procedures.
Wiring Diagrams:
Comprehensive electrical wiring diagrams are included in the 'Electrical system' section, vital for diagnosing and repairing electrical faults.
Hydraulic Schematics:
Detailed hydraulic schematics are part of the 'Hydraulic system' coverage, enabling a clear understanding of fluid flow and component interaction.
Torque Specifications:
Crucial torque specifications for fastener tightening in critical areas like wheel nuts, mast components, and hydraulic fittings would be included.
Diagnostic Codes:
If the PLC or display generates diagnostic trouble codes (DTCs), the manual would provide a list of these codes and their meanings.
Engine Type:
Information on the specific engine type (e.g., internal combustion, electric) for the MX15 would be detailed within the manual, but is not explicitly stated in the product description. This manual likely covers the powertrain components responsible for motive force.
Performance Details:
The manual would contain specifications related to engine output, torque, and power delivery as it pertains to the forklift's operational performance, but these specific figures are not provided in the product summary.
Fuel System Type:
If the MX15 is an internal combustion model, the manual would detail its fuel system, including fuel delivery, injection or carburetion, and filtration. For electric models, this section would focus on the electrical power delivery system.
Engine Assembly:
While not a car, if internal combustion, the manual would cover engine assembly, disassembly, and overhaul procedures for the power unit.
Transmission Type:
The 'Travel drive' section indicates coverage of the forklift's drivetrain, which would include the transmission system (e.g., hydrostatic, powershift, or electric motor drive). Specific transmission details would be within the manual.
Transmission Features:
The manual would elaborate on transmission operation, maintenance, and repair, potentially including torque converter functionality, gear selection mechanisms, and control systems.
Gear Ratios:
The manual would provide details on transmission gear ratios relevant to the forklift's operational speeds and torque requirements.
Overall Dimensions:
Specific dimensions (length, width, height) for the Still Wagner MX15 would be detailed in the manual, crucial for operational planning and storage. These are not in the product description.
Operating Weight:
The manual would include information on the forklift's operating weight, unladen weight, and potentially axle load ratings, essential for safety and regulatory compliance.
Rated Capacity:
While not explicitly stated, the 'Lifting device' and 'Cylinder' sections strongly imply coverage of the forklift's lifting capacity, load chart, and related safety parameters.
Maximum Lift Height:
The manual would detail specifications related to the lifting height capability of the mast and associated mechanisms.
Safety Standards:
The manual would refer to relevant safety standards and regulations applicable to forklift operation and maintenance. Specific ratings are not provided in the product info.
Operator Assist:
The manual would cover operator controls, warning systems, and any active safety features integrated into the forklift's design, possibly related to the PLC and display.
Warning Systems:
Information on audible and visual warning systems, such as backup alarms and indicator lights.
Operator Protection:
Information regarding operator protection (e.g., overhead guards, seatbelts if applicable) would be present, emphasizing safe operating practices.
Operator Interface:
The 'Display' section indicates coverage of the operator interface, which may include status indicators, error messages, and operational parameters displayed to the operator.
Control Systems Logic:
The 'PLC' section suggests advanced control logic is employed, and the manual will detail how this system manages and optimizes forklift functions.
Plc Functionality:
Detailed explanation of the PLC's role in controlling various forklift functions, including safety interlocks and performance optimization.
Diagnostic Ports:
While not explicitly stated, advanced forklifts often have diagnostic ports for connecting external testing equipment. The manual would detail their location and use.
Preventive Maintenance Schedule:
The manual provides guidance on routine and preventive maintenance, including recommended service intervals for various components and fluid changes. Specific intervals are detailed within the manual.
Hydraulic Fluid:
The manual will specify the correct type, viscosity, and capacity of hydraulic fluid required for the MX15, crucial for system longevity and performance.
Lubricant Specifications:
Details on appropriate lubricants for various moving parts, greases, and oils will be provided to ensure smooth operation and reduce wear.
Transmission Fluid:
If applicable to the transmission type, the manual will specify the correct transmission fluid and capacity.
Lubrication Points:
Diagrams or descriptions detailing all lubrication points and the type of lubricant to be used.
Common Faults:
The troubleshooting section is designed to address common issues and failures, providing diagnostic strategies to identify and rectify them efficiently.
Preventive Measures:
Proactive advice and checks to prevent common wear and tear issues.
Filter Part Numbers:
The manual would typically list part numbers for essential filters (e.g., hydraulic, engine oil if applicable) to facilitate correct replacement.
Manufacturer Profile:
Still Wagner is a well-established manufacturer of material handling equipment, known for its robust and reliable forklifts. This manual supports users of their products.
Mx Series:
The MX series represents a line of forklifts from Still Wagner. The MX15 specifically would have its own design and feature set within this series, details of which are within the manual.
Mx15 Specifics:
Details specific to the MX15 model's design, features, and any particular innovations within the Still Wagner product line.
Production Years:
The specific production years covered by this manual are not stated in the product description. However, service manuals typically cover a range of model years for a specific model or series.
