Engine:
Complete Engine Overhaul, Disassembly, Reassembly, Tuning
Fuel System:
Fuel Injection System, Fuel Pump, Injectors, Throttle Body Maintenance and Repair
Ignition System:
Ignition Coils, Spark Plugs, ECU Control, Timing
Lubrication System:
Oil Pump, Oil Filter, Oil Galleries, Lubrication Schedules
Exhaust System:
Exhaust Pipes, Mufflers, Catalytic Converter, Lambda Sensors
Electrical System:
Wiring Diagrams, Battery, Charging System, Lighting, Ignition Switches, ECU Diagnostics
Bodywork:
Body Panel Removal and Installation, Fairings, Seat Assembly, Handlebars
Maintenance:
Routine Servicing, Fluid Changes, Filter Replacements, Inspections
Removal Installation:
Component Removal and Installation Procedures for all Major Systems
Disassembly Reassembly:
Detailed Step-by-Step Procedures for Assemblies and Disassemblies
Troubleshooting:
Diagnostic Procedures and Fault Finding for Common Issues
Depth:
Comprehensive Repair and Overhaul, including Engine and Transmission Disassembly
Engine Type:
Air-cooled, 4-stroke, SOHC, 4-valve
Displacement:
1854cc (113.2 cubic inches)
Bore X Stroke:
100.0 mm x 118.0 mm (3.94 in x 4.65 in)
Fuel Delivery:
Fuel Injection
Throttle Control:
YCC-T (Yamaha Chip Controlled Throttle)
Horsepower Approximate:
Approximately 100 hp (exact figures vary by region and tuning)
Torque Approximate:
Approximately 120 lb-ft (exact figures vary by region and tuning)
First Service:
Typically at 600 miles or 1,000 km (refer to specific manual for exact details).
Engine Oil Type:
Yamalube 4 (or equivalent) SAE 10W-40 API SG or higher (refer to manual for exact specification)
Engine Oil Capacity:
Approximately 4.2 L (4.4 US qt) with oil filter change (refer to manual for exact specification)
Coolant Type:
Not applicable (air-cooled engine)
Common Wear Items:
Clutch plates, brake pads, tires, belt drive wear
Potential Concerns:
Fuel injection system calibration, electrical connections (as per general motorcycle maintenance).