Target Audience:
Do-it-yourself tractor owners and professional mechanics.
Value Proposition:
Inexpensive way to maintain vehicle working properly, reducing reliance on costly professional services.
Ease Of Use:
Numbered table of contents, bold figure numbers for quick reference, and clear, sequential instructions.
Comprehensiveness:
The number one source for repair and service information, covering every detail.
Information Organization:
Troubleshooting and electrical service procedures are integrated with wiring diagrams for efficiency.
General Information:
Covered
Engine Mechanical System:
Covered
Engine Electrical System:
Covered
Emission Control System:
Covered
Suspension System:
Covered
Manual Transaxle System:
Covered
Automatic Transaxle System:
Covered
Driveshaft And Axle:
Covered
Body Interior And Exterior:
Covered
Body Electrical System:
Covered
Restraint System:
Covered
Estimated Page Count:
Not Specified (but comprehensive)
Type:
Workshop Service Repair Manual
Delivery Method:
Instant Download
Printability:
Fully Printable
Software Requirements:
Adobe PDF Reader, WinZip
Operating Systems:
All Versions of Windows & Mac
Engine Systems:
Mechanical and Electrical aspects of the engine are detailed, including troubleshooting and repair.
Drivetrain Systems:
Covers clutch, manual and automatic transaxle systems, driveshaft, and axles for comprehensive repair.
Chassis Systems:
Includes detailed coverage of suspension, steering, and brake systems.
Electrical Systems:
Dedicated sections for engine electrical system and body electrical system, with wiring schematics.
Body And Interior:
Details on both interior and exterior bodywork, as well as restraint systems.
Maintenance Procedures:
Step-by-step instructions for routine maintenance and service.
Repair Procedures:
Comprehensive, detailed, and numbered instructions for all repair operations.
Troubleshooting:
Integrated troubleshooting guidance, especially for electrical systems.
Diagnostic Procedures:
Assistance in diagnosing common and complex problems with the tractor.
Depth Of Coverage:
Complete, covering every detail for do-it-yourselfers and experienced mechanics.
Instruction Format:
Numbered instructions, detailed substeps, notes, cautions, and warnings.
Illustration Quality:
Detailed illustrations, drawings, photos, and diagrams to guide procedures.
Wiring Schematics:
Included for accurate electrical system diagnostics and repair.
Engine Type:
Diesel (typical for this era and model class)
Engine Manufacturer:
Allis-Chalmers (likely supplied by a major engine manufacturer like Perkins or Waukesha)
Engine Displacement:
Typically in the range of 400-500 cubic inches (e.g., approximately 6.6L - 8.2L). Specific displacement requires further model year research.
Horsepower:
Estimated 100-120 PTO HP. Exact figures vary by specific engine tune and model year.
Torque:
Detailed torque specifications and charts would be found within the manual.
Injection System:
Likely a mechanical diesel injection system (e.g., Bosch or CAV/Lucas). Specifics are in the manual.
Oil Type And Capacity:
The manual will specify exact SAE viscosity grades (e.g., 15W-40 or 10W-30) and oil capacities based on the engine.
Filter Part Numbers:
The manual will contain OEM and potentially cross-referenced aftermarket part numbers for oil, fuel, and air filters.
Transmission Type:
Likely an Allis-Chalmers own designed transmission, possibly with a powershift option. The manual covers both manual transaxle and automatic transaxle systems.
Powershift Option:
Some models of this era offered a powershift or 'Power Director' type transmission for on-the-go gear changes.
Gear Selection:
The manual will detail the number of forward and reverse gears available, as well as any specific shifting procedures.
Transmission Fluid Type:
The manual will specify the required type of hydraulic fluid or specialized transmission oil, with capacities.
Overall Length:
Estimates range from 140-160 inches. Exact dimensions are in the manual.
Overall Width:
Varies with tire size, typically 70-80 inches. Exact dimensions are in the manual.
Operating Weight:
Approximately 9,000 - 11,000 lbs. Exact weight specification is available in the manual.
Wheelbase:
Specific wheelbase dimension is detailed within the manual for chassis service.
Rollover Protection:
ROPS (Roll-Over Protective Structure) may have been an option or standard, detailed in the manual's safety section.
Brake System Type:
Typically hydraulic disc brakes, with specific service and adjustment procedures detailed.
Restraint System Coverage:
The manual covers restraint systems, which would include seatbelt information if equipped.
Engine Oil Change Interval:
Typically 250-500 hours. Precise intervals and oil types are specified in the manual.
Transmission Fluid Change Interval:
Usually around 1000-2000 hours. Exact intervals and fluid types are detailed in the manual.
Hydraulic Fluid Type:
The manual will specify the correct hydraulic fluid (e.g., Hy-Tran or equivalent) and its properties.
Coolant Type:
The manual will detail the correct antifreeze mixture (e.g., ethylene glycol) and capacity.
Common Wear Items:
Based on common tractor issues of the era, potential wear items could include clutch components, hydraulic pump seals, and steering linkages. The manual provides diagnostic steps for these.
Electrical Reliability:
Older electrical systems can be prone to corrosion and connection issues; the manual's wiring diagrams are crucial for troubleshooting.
Manufacturer History:
Allis-Chalmers was a significant American manufacturer of agricultural and industrial equipment, known for its distinctive orange tractors.
7000 Series Context:
The 7000 series represented a modern range of articulated and conventional tractors from Allis-Chalmers, focusing on increased power and operator comfort.
Production Years:
The Allis-Chalmers 7060 was primarily produced in the late 1970s and early 1980s.
