Vehicle Segment:
Utility tractor, agricultural equipment.
Brand Perception:
Case IH is a well-established brand in agricultural machinery, known for robustness and reliability.
Manual Advantage:
Provides detailed, accurate information essential for maintaining and repairing the Case IH 255, replacing outdated or lost paper manuals.
Engine System:
Engine overhaul, diagnostics, fuel system, lubrication, cooling system, exhaust system, air intake.
Transmission System:
Gearbox overhaul, clutch, differential, PTO (Power Take-Off), hydraulics.
Electrical System:
Wiring diagrams, starter, alternator, battery, lighting, instrument panel, electronic controls (if applicable).
Hydraulic System:
Hydraulic pump, cylinders, control valves, hoses, filters, system diagnostics and repair.
Chassis And Steering:
Front axle, rear axle, steering system, brakes, wheel hubs, suspension components.
Operator Station:
Seat, controls, operator safety features, cab systems (if equipped).
Maintenance:
Scheduled maintenance, lubrication points, filter replacement, fluid checks and changes.
Troubleshooting:
Diagnostic charts, symptom-based troubleshooting for common problems.
Repair And Overhaul:
Step-by-step instructions for component disassembly, repair, and reassembly.
Technical Specifications:
Torque values, clearances, specifications for all major components.
Special Tools:
Identification and usage of specialized tools required for repairs.
Depth Of Information:
Comprehensive, covering all aspects of repair and maintenance from basic adjustments to full component overhauls.
Engine Type:
Likely a diesel engine, specific displacement and model vary by exact configuration.
Horsepower Range:
Typical for this class of tractor would be in the 40-70 HP range. Exact figures require model year confirmation.
Injection System:
Likely direct injection, possibly with mechanical or electronic controls depending on the era.
Cooling Method:
Liquid-cooled
Transmission Type:
Likely a manual or synchronized shuttle shift transmission. Options may include powershift or hydrostatic transmissions for some variants.
Optional Transmission:
Varies by specific model variant and year of manufacture.
Pto Features:
Standard PTO speeds (e.g., 540 RPM, 1000 RPM) depending on configuration.
Wheelbase:
Specifications vary by model configuration and tire size. Typically in the range of 75-90 inches.
Operating Weight:
Typically in the range of 4,000 - 6,000 lbs without ballast, depending on configuration.
Drawbar Kategorii:
Typically Category 1 or 2.
Instrument Panel:
Basic analog gauges for engine RPM, temperature, oil pressure, fuel level. Warning lights for critical systems.
Cruise Control:
Not typically featured on tractors of this era.
Diagnostic Ports:
May have basic diagnostic capabilities via specific connectors, but not OBD-II like modern vehicles.
Engine Oil Change:
Typically every 250-500 operating hours, depending on engine type and operating conditions. Refer to manual for specific intervals.
Fuel Filter Replacement:
Recommended replacement at specified intervals, often annually or every 250-500 hours. Consult manual.
Hydraulic Fluid Change:
Typically every 1000-1200 operating hours. Refer to manual for exact interval and fluid type.
Engine Oil Grade:
Likely SAE 15W-40 API CD or CE/SF rated diesel engine oil. Exact specification in manual.
Hydraulic Fluid Type:
Likely a UTTO (Universal Tractor Transmission Oil) or a specific Case IH hydraulic fluid. Check manual for exact specification (e.g., Case IH HY-TRAN).
Transmission Fluid Type:
May share hydraulic fluid or require a specific gear oil depending on transmission type. Consult manual.
Coolant Type:
Ethylene glycol based antifreeze, typically a 50/50 mix with distilled water. Check manual for specific type and capacity.
Common Wear Items:
Hydraulic pump wear, clutch wear, PTO engagement issues, starter motor failure, fuel injector problems due to fuel quality.
Electrical Gremlins:
Wiring harness degradation, switch failures, particularly in older units exposed to elements.
Air Filter Maintenance:
Regular inspection and cleaning/replacement of the air cleaner element is crucial for engine longevity.
Cooling System Maintenance:
Regular flushing and replacement of coolant, checking hoses and thermostat for leaks and proper operation.
Manufacturer History:
Case IH has a long lineage of agricultural machinery innovation, tracing roots back to J.I. Case Company founded in 1842.
Tractor Series:
The 255 likely belongs to a series of compact to utility tractors produced by Case IH, often succeeding or complementing earlier models.
Production Years:
The Case IH 255 was primarily produced in the late 1980s and early 1990s. Exact production years vary.
Manufacturing Location:
Likely manufactured in North America or Europe, common production sites for Case IH agricultural equipment.
