Target Audience:
Professional automotive technicians and experienced DIY enthusiasts.
Advantage:
Provides factory-level information often not found in generic repair manuals, enabling accurate and efficient repairs.
Feature 1:
Step-by-step repair procedures.
Feature 2:
Critical diagnostic specifications.
Feature 3:
Detailed illustrations and diagrams.
Feature 4:
Comprehensive maintenance schedules.
Feature 5:
Troubleshooting guides.
Feature 6:
Instant download accessibility.
Engine:
Engine mechanical, cooling system, lubrication system, fuel system (carburetor/EFI depending on variant), ignition system, emissions control.
Transmission:
Manual and automatic transmission service, operation, diagnostics, and overhaul.
Drivetrain:
Clutch, driveshafts, differentials, axles, wheel bearings.
Suspension:
Front and rear suspension components, steering linkage, wheel alignment specifications.
Brakes:
Brake system operation, hydraulic components, disc/drum brake service, parking brake, ABS (if equipped).
Electrical:
Wiring diagrams, charging system, starting system, lighting, instruments, accessories, fuse and relay identification.
Body:
Body panels, doors, hinges, latches, glass, trim, interior components, heating and air conditioning (HVAC).
Maintenance:
Scheduled maintenance, fluid changes, filter replacements, lubrication, inspections.
Disassembly Assembly:
Detailed step-by-step instructions for component removal and installation.
Troubleshooting:
Diagnostic procedures for common and uncommon issues, symptom-based troubleshooting charts.
Rebuild:
Component overhaul and rebuilding procedures for engines, transmissions, etc.
Specifications:
Critical torque values, clearances, fluid capacities, wear limits, and diagnostic parameters.
Depth:
Factory-level detail suitable for professional technicians and advanced DIY mechanics.
Engine Options 1985:
2.3L (140 cu in) OHC Inline-4; 3.0L (182 cu in) OHC V6; 3.8L (232 cu in) OHC V6 (later models may have seen different offerings depending on market).
Horsepower Range:
Approximately 88 hp (2.3L I4) to 112 hp (3.8L V6) - exact figures vary by year and specific engine variant.
Torque Range:
Approximately 120 lb-ft (2.3L I4) to 140 lb-ft (3.8L V6) - exact figures vary by year and specific engine variant.
Fuel Delivery:
Carbureted (e.g., Motorcraft 2150/2700 for 4-cyl and 3.0L V6) or Electronic Fuel Injection (EFI) for certain V6 variants, particularly the 3.8L.
Ignition Type:
Electronic ignition (Duraspark or EEC-IV controlled).
Wheelbase:
Approximately 107.7 inches (2736 mm).
Length:
Approximately 193.5 inches (4915 mm).
Width:
Approximately 70.3 inches (1786 mm).
Height:
Approximately 54.2 inches (1377 mm).
Curb Weight Range:
Approximately 2900-3300 lbs (1315-1497 kg) depending on engine and options.
Safety Equipment Standard:
Seat belts, padded interior surfaces, safety glass.
Brake Type:
Front disc brakes, rear drum brakes (standard). Optional rear disc brakes on some higher trims or performance models.
Structural Design:
Body-on-frame construction (common for American Ford of this era) or unibody construction depending on global market variation of Granada.
Oil Change Interval:
Typically every 3,000-5,000 miles or 3-6 months, depending on driving conditions and oil type used (refer to manual for specific recommendations).
Tune Up Interval:
Spark plug replacement typically around 30,000 miles; distributor cap and rotor inspection/replacement as needed.
Engine Oil Type:
API SF or SG classification, SAE 5W-30 or 10W-30 recommended for most ambient temperatures (check manual for precise weights and capacities).
Coolant Type:
Ethylene Glycol based antifreeze, typically a 50/50 mix with distilled water (follow manual's specific coolant type).
Brake Fluid Type:
DOT 3 brake fluid.
Common Issue 1:
Carburetor adjustment and performance degradation over time.
Common Issue 2:
Rust and corrosion, particularly in certain climates.
Common Issue 3:
Wear on suspension and steering components due to age.
Common Issue 4:
Electrical component reliability, especially switches and sensors.
Brand Philosophy:
Ford's focus on producing reliable, comfortable, and progressively styled vehicles for the mainstream market.
Granada Lineage:
The Ford Granada was positioned as a more upscale, European-influenced model in the North American market during its production run (1975-1982 for North America). The 1985 model year reference likely pertains to the European Ford Granada (developed by Ford of Europe), which had a distinct lineage and design from the North American counterpart.
Manufacturing Locations:
Ford of Europe plants (e.g., Germany, UK) for the European model. North American models were produced in the US and Canada.
