Engine Mechanical:
Complete rebuild, diagnosis, repair procedures for all engine variants
Fuel System:
Fuel injection systems (EFI/MPI), fuel pumps, injectors, lines, evaporative emission control (EVAP)
Ignition System:
Ignition coils, distributor (if applicable), spark plugs, wiring, electronic control module (ECM) diagnosis
Transmission Manual:
Clutch system, gear selection, internal component repair, rebuild procedures
Transmission Automatic:
Torque converter, valve body, planetary gear sets, hydraulic systems, diagnosis, fluid service
Drivetrain Axles:
CV joints, axleshafts, differentials, front-wheel-drive specific components
Suspension Front:
MacPherson struts, control arms, ball joints, bushings, steering knuckles
Brakes Front:
Disc brake systems, calipers, rotors, pads, hydraulic lines, master cylinder
Steering:
Power steering system, pump, rack and pinion, steering column, tie rod ends
Electrical System Charging:
Alternator, voltage regulator, battery, wiring
Lighting Exterior:
Headlights, taillights, turn signals, brake lights, fog lights (if equipped)
HVAC:
Air conditioning system (compressor, condenser, evaporator, refrigerant), heating system (heater core, blower motor), climate controls
Body Exterior:
Body panel repair, doors, hood, trunk lid, bumpers, trim, glass replacement
Suspension Rear:
Torsion beam axle or independent suspension (depending on specific model/year), shock absorbers, bushings
Brakes Rear:
Drum brake systems or disc brake systems (depending on trim/year), wheel cylinders, shoes, drums, parking brake mechanism
Electrical System Starting
Electrical System Starting:
Starter motor, solenoid, ignition switch
Lighting Interior:
Dome light, dashboard illumination, instrument cluster lights
Body Interior:
Dashboard, door panels, upholstery, seat mechanisms, headliner
Preventative Maintenance:
Oil changes, filter replacements, fluid checks and flushes, belt inspection and replacement, spark plug replacement
Troubleshooting:
Diagnostic procedures for all major systems, common fault identification and correction
Engine Repair:
Cylinder head removal/installation, piston and ring replacement, crankshaft and bearing service, camshaft service, valve timing adjustments
Transmission Overhaul:
Complete disassembly, inspection, replacement of seals, gaskets, and worn components for both manual and automatic transmissions
Brake System Repair:
Brake pad/shoe replacement, rotor/drum replacement, caliper/wheel cylinder rebuilding, brake line replacement, bleeding procedure
Suspension Component Replacement:
Strut replacement, ball joint replacement, tie rod end replacement, control arm bushing replacement
Electrical Component Testing:
Testing of alternators, starters, ignition systems, sensors, actuators, and various electrical accessories
HVAC Service:
Refrigerant charging, leak detection, component replacement (compressor, condenser, heater core), blower motor replacement
Body Panel Alignment:
Adjustment and replacement of body panels for proper fit and alignment
Wiring Diagram Interpretation:
Detailed wiring diagrams for all electrical systems, enabling component tracing and diagnosis
Depth:
Comprehensive: Covers everything from basic maintenance to complete engine and transmission rebuilds, including detailed diagnostics and electrical troubleshooting.
Oil Change Interval:
Typically 3,000 miles (4,800 km) or 3 months, but the manual will specify exact intervals based on driving conditions and oil type.
Transmission Fluid Change:
Refer to manual for specific mileage/time intervals, generally around 30,000-60,000 miles (48,000-96,000 km) for automatic transmissions.
Coolant Flush:
Recommended every 2-3 years or 30,000-50,000 miles (48,000-80,000 km).
Engine Oil:
API Certified SAE 5W-30 or 10W-30 depending on climate. Manual will list exact specifications and capacities.
Transmission Fluid Automatic:
Chrysler ATF+2 or ATF+3, or equivalent (manual will specify exact type and capacity).
Coolant:
Ethylene glycol-based antifreeze. Manual will specify mixture ratio and type.
Common Problems:
Potential issues may include A/C system leaks, electrical gremlins (especially window regulators and power locks), exhaust manifold cracks, and worn suspension components due to age.
Oil Filter Example:
For example, a Fram PH8A or equivalent for many Chrysler engines of this era (manual will list OE and aftermarket part numbers).
